MACTIONS Motorcycle Turn Signal License Plate Relocation Kit User Manual

1. Product Overview

This manual provides basic usage guidelines for the MACTIONS Motorcycle Turn Signal License Plate Relocation Kit. This kit is designed to relocate your motorcycle's turn signals and license plate for a customized look or improved functionality. It is compatible with various Harley-Davidson models, including Dyna Super Glide Custom (2002-2017) and Sportster XL (2004-2022).

The kit is constructed from durable aluminum, featuring a black finish that is waterproof and resistant to rust and paint peeling, ensuring longevity and a consistent appearance.

Figure 1: MACTIONS Turn Signal Relocation Kit installed on a Harley-Davidson motorcycle.

2. Specifications

Package Dimensions:

• Length: 26 cm
• Width: 15 cm
• Height: 4 cm
• Weight: 0.419 kg

Figure 2: Detailed dimensions of the Turn Signal Relocation Kit. Key measurements include 285mm (11.22 inches) overall width, 116mm (4.64 inches) overall height, and 169mm (6.65 inches) width of the main bracket.

3. Package Contents

The MACTIONS Turn Signal License Plate Relocation Kit includes the following components:

• Shelf (Main Bracket) x 1
• Support (Crossbar) x 1
• Screw x 2
• Shim x 2
• Nut x 2
• Reflective Stripe x 1
• Film x 1

Figure 3: All components included in the kit: Shelf, Support, Screws, Shims, Nuts, Reflective Stripe, and Film.

4. Setup and Installation

4.1 Pre-Installation Checklist

1. Compatibility Check: Ensure the kit is compatible with your specific motorcycle model, year, and specifications (e.g., Harley Dyna Super Glide Custom 2002-2017, Sportster XL 2004-2022).
2. Personal Protection: Always wear appropriate protective gear, including gloves and eye protection, when installing or replacing accessories.
3. Local Regulations: Verify that all accessories and their installation comply with local traffic laws and regulations regarding turn signal and license plate placement.
4. Tools Required: Gather necessary tools such as wrenches, screwdrivers, and potentially a drill (depending on your motorcycle model and desired mounting).

4.2 Installation Steps (General Guidelines)

While specific steps may vary by motorcycle model, the general installation process involves:

1. Remove Existing Components: Carefully remove the original turn signals and license plate bracket from your motorcycle. Disconnect any wiring as needed.
2. Assemble the Relocation Kit:
   • Attach the "Support" (crossbar) to the "Shelf" (main bracket) using the provided screws, shims, and nuts.
   • Ensure all connections are secure but do not overtighten initially.
3. Mount the Kit:
   • Position the assembled relocation kit on your motorcycle's fender or desired mounting location.
   • Secure the kit using appropriate hardware. For some Sportster models, additional fabrication or drilling of the bike fender may be required if the kit's bolt pattern (typically 2 bolts) does not align with the motorcycle's existing 3-bolt support.
4. Install Turn Signals: Mount your turn signals onto the designated slots on the relocation kit's crossbar.
5. Install License Plate: Attach your license plate to the main bracket.
6. Wiring: Reconnect or extend turn signal wiring as necessary. Ensure all wiring is neatly routed and secured to prevent interference or damage.
7. Final Tightening: Once all components are in place and aligned, securely tighten all screws and nuts.
8. Test Functionality: Before riding, test the turn signals and ensure the license plate is firmly attached and visible.

Figure 4: Various views of the relocation kit, illustrating its design from different angles to aid in understanding its structure during installation.

5. Operating the Product

This product is a passive accessory designed to relocate your motorcycle's turn signals and license plate. Once correctly installed, it requires no active operation. Ensure your turn signals function correctly and your license plate is clearly visible as per local regulations.

6. Maintenance

To ensure the longevity and appearance of your MACTIONS Turn Signal License Plate Relocation Kit, follow these maintenance guidelines:

• Regular Cleaning: Clean the kit regularly with a mild soap and water solution. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Inspection: Periodically inspect all mounting points, screws, and nuts for tightness. Vibrations from riding can loosen fasteners over time.
• Corrosion Prevention: The kit is made from aluminum and designed to be waterproof and resistant to rust and paint peeling. However, regular cleaning and inspection can further prevent any potential corrosion or wear, especially in harsh weather conditions.
• Damage Check: If the accessories are damaged or their performance declines (e.g., cracks, severe bending), stop using them immediately and seek professional repair services.

Figure 5: Waterproof demonstration, highlighting the product's resistance to moisture.

Figure 6: Visual comparison demonstrating the kit's superior surface scratch resistance and wear resistance, preventing rust and paint peeling common in other products.

7. Troubleshooting

• Loose Components: If any part of the kit feels loose after installation, re-tighten all fasteners. If loosening persists, consider using thread-locking compound on the screws.
• Fitment Issues (Sportster XL): Some users have reported that for Sportster models with a 3-bolt fender support (instead of 2), the kit may require modification of the motorcycle fender or the kit itself for proper alignment. This might involve drilling additional holes. If you are not comfortable with such modifications, consult a professional.
• Damaged Screws: There have been reports of screw bits breaking during installation. Use appropriate tools and avoid excessive force when tightening. If screws are damaged, replace them with high-quality alternatives.
• Accessory Damage: If the kit or any of its components become damaged, discontinue use immediately. Professional repair or replacement is recommended to ensure safety and compliance.

8. User Tips

• Pre-fitment: Before final tightening, loosely assemble the kit and position it on your motorcycle to check for fitment and alignment. This helps identify potential issues early.
• Sportster Specifics: For Sportster XL models, be aware that some fabrication or drilling of the bike fender might be necessary to achieve a clean installation, especially if your model has a 3-bolt support instead of the 2-bolt design the kit might primarily accommodate.
• Screw Quality: While the kit includes necessary hardware, some users have noted issues with screw durability. Consider having spare, high-quality screws on hand if you anticipate heavy use or frequent adjustments.
• Aesthetic Integration: Take your time to ensure the kit is aligned symmetrically and aesthetically pleasing with your motorcycle's design.

9. Frequently Asked Questions (FAQ)

Q: Do they fit on a 2013 Sportster XL1200c?

A: Yes, the kit is compatible with Sportster XL models from 2004-2022, which includes the 2013 Sportster XL1200c. However, please refer to the "User Tips" and "Troubleshooting" sections regarding potential fitment considerations for Sportster models with a 3-bolt fender support.

10. Support and Further Information

For additional assistance, technical support, or inquiries, please refer to the official MACTIONS website or contact their customer service.

A detailed user manual in PDF format is also available for download: View User Manual (PDF).

11. Product Video Overview