Introduction
Thank you for purchasing the MILESEEY D5T laser distance meter. This manual provides detailed instructions for safe and effective use of your device. The MILESEEY D5T offers 8 functions to meet various measuring needs and enhance user experience.
Safety Information
Safety Precautions
CAUTION: For the safe use of this handheld laser distance meter, please read below instructions carefully.
- The device is categorized into Class 2 laser product. DO NOT stare at laser directly or shoot at others or it will cause damage to eyes.
- The product is in accordance with strict standards and regulations through the development and manufacturing, but still can't entirely exclude the possibility of interference to other devices, may cause discomfort to human and animals.
- Please DO NOT use this product under explosive or corrosive environment.
- Please DO NOT use this product near medical devices.
- Please DO NOT use this product on the plane.
Disposal
Everyone is responsible for environmental protection. It's prohibited to dispose used batteries together with household waste. Please collect used batteries to designated waste station.
Scope of Responsibility
MileSeey will not be responsible for the damages caused by improper use below:
- Using the product without instruction;
- Use of accessories from other manufacturers without approval from MileSeey;
- Carrying out modification or conversion of the product.
Product Overview
Button Functions

This image shows the layout of the MILESEEY D5T's buttons, including the Measure button, Historical Memory, Area/Volume/Pythagorean, Measuring Reference/Unit, Add/Subtract, Beep, and ON/OFF/Return/Clear buttons.
- Measure button / Long press to enter Continuous measurement (Min / Max)
- Historical memory Button
- Area / Volume / Pythagorean
- Measuring reference / Unit button
- Add(+)Subtract(-) Button
- Beep button
- ON/OFF/Return/Clear button
LCD Display

This image illustrates the MILESEEY D5T's LCD display, showing indicators for laser status, reference points, measurement modes, battery status, historical memory, and measurement values.
- Laser on
- Reference point (front)
- Reference point (rear)
- Distance/Continuous measurement
- Measuring mode indication
- Battery status
- Historical memory
- Value 1
- Value 2/Min value
- Value 3/Max value
- Summary line/latest value/calculation result
Getting Started
Battery Insertion
Open the battery compartment then insert batteries according to the direction indicated in the compartment. For safety, please close the compartment with the provided lid after battery insertion.

Diagram showing how to correctly insert AAA batteries into the device's battery compartment, ensuring proper polarity.
Power On/Off
- Manual Power On/Off: Long press the CLEAR button to switch the device on/off.
- Automatic Power Off: The instrument switches off automatically after three minutes of inactivity.
Adjusting Measuring Reference
Press the UNIT button to switch the reference point between the front and the rear of the instrument. The default reference setting is from the rear reference. The reference point can be set and saved manually.

Diagram illustrating the two reference points (front and rear) for measurements, which can be toggled using the Unit button.
Unit Change
Long press the UNIT button to change the distance unit between m, ft, in, and ft+in.
Beep On/Off
Press the Beep button to switch the beep sound on/off.
Measurement Functions
Single Distance Measurement
Press the MEAS button to activate the laser. Press MEAS again to trigger the distance measurement. The measured value is displayed immediately.

Example of a single distance measurement, showing the laser beam and the measured value on the display.
Continuous Measurement (Min / Max)
Long press the MEAS key to activate continuous measurement. The maximum and minimum distances measured are shown in the display. The last measured value is displayed in the summary line. This function will be stopped automatically after 5 minutes of inactivity. You can press MEAS or CLEAR to stop the function.

Diagram showing continuous measurement mode, illustrating how minimum and maximum values are tracked as the device is moved.
Area Measurement
Press the Area/Volume/Pythagorean button once; the symbol for area will appear on the display. Press MEAS to take the first distance measurement (e.g., length). Press MEAS again to take the second distance measurement (e.g., width). The results of length, width, perimeter, and area are displayed on the screen.
Volume Measurement
Press the Area/Volume/Pythagorean button twice; the symbol for volume will appear on the display. Press MEAS to take the first distance measurement (e.g., length). Next, get the width, then height. The result of length, width, height, and volume is displayed in order.
Pythagorean Measurement
Pythagoras measurement can be applied to different flat surfaces. Please make sure the vertical edge is perpendicular to the measured object.
NOTES:
- All measured points should be on the same horizontal or vertical plane.
- In order to get more accurate measurement results, the laser rangefinder should be measured at a fixed rotation at a point.
- According to the Pythagoras Theorem, the right-angle side cannot be larger than the hypotenuse; otherwise, there is a calculation error.
Pythagorean Method - Two Points
Refer to the diagram. Press the Area/Volume/Pythagorean button 3 times to activate the function; the symbol will appear on the display. Take measurements with the 2 points shown in the diagram in numeric sequence. The height of the object will be calculated automatically and displayed on the screen.
Pythagorean Method - Three Points
Refer to the diagram. Press the Area/Volume/Pythagorean button 4 times to activate the function; the symbol will appear on the display. Take measurements with the 3 points shown in the diagram in numeric sequence. The height is calculated and displayed on the summary line. Press CLEAR to delete any measured length and then press MEAS to re-measure.
Addition / Subtraction
Addition: Short press the Add/Subtract button.
Subtraction: Long press the Add/Subtract button.
Take a measurement, then press the Add/Subtract button. The addition/subtraction symbol will appear on the display. Then press the MEAS button to take the second measurement. The second value will be automatically added to/subtracted from the first one. This process can be repeated as required.
Historical Memory
Continuous long press the Historical Memory button to view historical memory. The last 30 measured values will be displayed in reversed order. Press CLEAR to quit historical value viewing.
Bluetooth & App Connectivity
The MILESEEY D5T supports real-time data transfer to a smartphone app via Bluetooth. This allows you to create floor plans, draw on pictures, and manage your measurements digitally.
Official product video demonstrating the MILESEEY D5T's features, including Bluetooth connectivity and real-time data transfer to a smartphone application for floor plan creation and measurement management.
To connect:
- Ensure Bluetooth is enabled on your smartphone.
- Download the 'Smart Life' app from the App Store or Google Play (as indicated in product images).
- Follow the app's instructions to pair your D5T device and begin transferring data.

Image showing the MILESEEY D5T connected to a smartphone app, demonstrating how measurements can be integrated into floor plans or drawings.

Screenshot of the MILESEEY D5T's companion app interface, displaying a list of recorded measurements and their corresponding labels.
Care and Maintenance
Keep the device dry and clean. Wipe with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Store in a cool, dry place when not in use.
Troubleshooting Guide
All errors or failures will be shown as codes. The following table explains the meaning of codes and solutions.
| Code | Cause | Corrective Measure |
|---|---|---|
| 204 | Calculation error | Refer to user manual, repeat the procedures. |
| 208 | Excessive current | Please contact your distributor |
| 220 | Battery low | Replace new batteries. |
| 252 | Temperature too high | Working temperature of this device is $0^{\circ}C \sim +40^{\circ}C$ ($32^{\circ}F \sim +104^{\circ}F$) |
| 253 | Temperature too low | Working temperature of this device is $0^{\circ}C \sim +40^{\circ}C$ ($32^{\circ}F \sim +104^{\circ}F$) |
| 255 | Received signal too weak or measurement time too long | Use target plate or change a good reflective surface. |
| 256 | Received signal too strong | Target too reflective, use target plate or do not aim at strong light objective. |
| 261 | Outside of the range of measurement | Select the measurement distance within the range of measurement. |
| 500 | Hardware error | Switch on/off the device several times. If the symbol still appears, please contact your dealer for assistance. |
Technical Specifications
| Parameter | Value |
|---|---|
| The maximum measuring range | 0.2-50m/100m |
| Measuring accuracy | ±(2.0mm+5x10⁻⁵D) |
| Measuring units | m/ft/in/ft+in |
| Laser class | Class 2 |
| Laser type | 630-670nm, < 1mW |
| Area, Volume Measurement | ✓ |
| Indirect Pythagorean theorem | ✓ |
| Addition and subtraction | ✓ |
| Continuous measurement | ✓ |
| Min. / max. value | ✓ |
| Beep | ✓ |
| 4-line display with backlight | ✓ |
| Single distance measurement | ✓ |
| Historical memory | 30 sets |
| Button | Soft rubber buttons |
| Operating temperature | 0°C-40°C |
| Storage temperature | -10°C-60°C |
| Battery life | 5,000 measurement times |
| Battery type | AAA 2 x 1.5V |
| Auto laser off | 30 seconds |
| Auto instrument off | 180 seconds |
| Dimensions (mm) | 115x50x28 |
User Tips
Bluetooth Connectivity: For seamless data transfer, ensure your phone's Bluetooth is active and you have the correct 'Smart Life' app installed. Some users find restarting the app or device helps if connection issues arise.
Warranty and Support
This product comes with a 12-month warranty and lifetime technical support from MILESEEY. For any concerns or support needs, please contact service@mileseey.com. We aim to respond within 24 hours.
For additional documentation, please refer to the official user manual PDF: MILESEEY D5T User Manual (PDF)