1. Product Introduction
The V318 is a gasoline car code reader that supports nine standard OBD II/EOBD protocols. Designed for plug-and-play operation, it quickly reads vehicle fault information and parameters, offering comprehensive fault diagnosis. Please read this manual carefully before use.
2. Safety Information and Matters Needing Attention
- Do not use abrasive cleaners to clean this product.
- Do not expose this product to heat or place it close to a fire source.
- Do not expose this product to direct sunlight for a long time.
- Do not attempt to disassemble or modify this product, as it contains no user-serviceable components.
- Do not use this product indoors for extended periods without proper ventilation.
- If the product will not be used for a long time, store it in a dry environment to avoid extreme temperatures and dust.
3. Product Overview
3.1 Tool Description
- Diagnostic Joint: Connects the decoder to the vehicle's Data Link Connector (DLC).
- LCD Display: Shows detection results and menu options.
- I/M Button: I/M Readiness Key for quick checks of state emissions readiness and drive cycle verification.
- Up Roll Button: Navigates up through menus and submenus.
- ESC Button: Cancels selection or operation in the menu, or returns to the previous menu.
- OK Button: Confirms selection or operation in the menu.
- Down Roll Button: Navigates down through menus and submenus.
3.2 Specifications
| Feature | Detail |
|---|---|
| Model | V318 |
| Display | 160*128 dpi, 1.8-inch TFT color screen |
| Operating Temperature | -20 to 60 °C (32 to 140 °F) |
| Storage Temperature | -30 to 70 °C (-4 to 158 °F) |
| Operating Voltage | 12V (Vehicle batteries supply 9.0 to 16.0V) |
| Product Size | 130mm * 70mm * 25mm |
| Product Weight | 144g (198g with packaging) |
| Supported Protocols | SAE J1850 PWM (41.6Kbaud), SAE J1850 VPW (10.4Kbaud), ISO9141-2 (5 baud init, 10.4Kbaud), ISO14230-4 KWP (5 baud init, 10.4 Kbaud), ISO14230-4 KWP (fast init, 10.4 Kbaud), ISO15765-4 CAN (11bit ID, 500 Kbaud), ISO15765-4 CAN (29bit ID, 500 Kbaud), ISO15765-4 CAN (11bit ID, 250 Kbaud), ISO15765-4 CAN (29bit ID, 250 Kbaud) |
| Supported Languages | Dutch, English, French, Italian, Russian, Spanish, German, Chinese, Japanese, Korean |
4. Setup
4.1 Included Accessories
The V318 OBD2 Scanner package typically includes:
- V318 OBD2 Diagnostic Instrument
- User Manual (this document, also available as a PDF)
- OBD2 Wire (integrated with the device)
4.2 Power Supply and Initial Connection
The V318 scanner is powered directly by the vehicle's Data Link Connector (DLC).
- Ensure the vehicle's ignition switch is OFF.
- Locate the vehicle's 16-pin Data Link Connector (DLC). This is typically found under the dashboard. Some vehicles may have a plastic cover plate over the DLC that needs to be removed first.
- Insert the OBD II wire from the scanner into the vehicle's DLC.
- Turn the vehicle's ignition switch to the ON position (engine can be off or running).
- The scanner will power on automatically.
4.3 Product Settings
To access system settings, navigate to the 'Setup' menu on the device. Here you can configure language and measurement units.
- Language: Select your preferred language from the available options (Dutch, English, French, Italian, Russian, Spanish, German, Chinese, Japanese, Korean).
- Unit of Measure: Set the measurement unit to either imperial or metric.
5. Operating Instructions
The V318 OBD2 Scanner offers various diagnostic functions. Use the Up/Down buttons to navigate menus, ESC to go back, and OK to confirm selections.
5.1 OBD II Diagnosis Overview
After connecting the scanner and turning on the ignition, press the I/M or OK button to enter the diagnostic menu. The scanner will automatically detect the vehicle protocol and display relevant information.
5.2 Read Codes
To read diagnostic trouble codes (DTCs):
- From the Diagnostic Menu, use the Up/Down buttons to select "Read Codes".
- Press the OK button to confirm.
- The screen will display DTCs and their definitions. The control module number, diagnostic code order, total number of codes, and type of code (general or manufacturer-specific) will be shown in the upper right corner.
5.3 Erase Codes
Caution: Erasing diagnostic codes will also delete "Freeze Frame" data and manufacturer-enhanced data. It will reset I/M readiness monitor status to non-ready. Do not erase codes before a technician has thoroughly checked the system.
To erase diagnostic trouble codes (DTCs):
- From the Diagnostic Menu, use the Up/Down buttons to select "Erase Codes".
- Press the OK button to confirm.
- A warning message "Erase trouble codes! Are you sure?" will appear. Select "YES" and press OK to proceed.
- If successful, "Delete is finished!" will be displayed. If unsuccessful, "Delete is failed. Rotate the key in the case of engine is turned off!" will appear.
5.4 View Freeze Frame
Freeze Frame data captures engine conditions at the moment a fault code is set. To view this data:
- From the Diagnostic Menu, select "View Freeze Frame".
- Press the OK button.
- The screen will display various parameters. Use Up/Down buttons to scroll through the data.
If no Freeze Frame data is available, "Freeze Frame is not stored" will be displayed.
5.5 I/M Readiness
I/M Readiness checks the operational status of the vehicle's emission system, crucial for emission testing. Some vehicles may support two types of I/M ready tests.
- From the Diagnostic Menu, select "I/M Readiness".
- Press the OK button.
- The screen will display the status of various monitors (e.g., MIL Status, Misfire Monitor, Fuel System Mon, Catalyst Mon, EVAP System Mon).
5.6 Read Vehicle Information
This function retrieves vehicle identification number (VIN), calibration ID, and calibration verification number (CVN).
- From the Diagnostic Menu, select "Vehicle Info.".
- Press the OK button.
- Use Up/Down buttons to select specific information like "Vehicle ID Number" and press OK to view.
5.7 Data Stream
View current engine data flow information in real-time.
- From the Diagnostic Menu, select "Data Stream".
- Press the OK button.
- The screen will display various data parameters. Use Up/Down buttons to view the data flow.
5.8 RealTime Curve
This function allows you to view real-time sensor data as a waveform.
- From the Diagnostic Menu, select "RealTime Curve".
- Press the OK button.
- Select parameters like "Car Speed", "Calculate Load Value", "Engine Coolant Temp", or "Engine RPM" and press OK to view their real-time curves.
5.9 Oxygen Sensor
Monitor the oxygen sensor readings.
- From the Diagnostic Menu, select "O2 Sensor".
- Press the OK button.
- The screen will display oxygen sensor test results. Use Up/Down buttons to view the current data flow.
5.10 Fuel Evaporation Control System (EVAP)
Monitor the EVAP system data.
- From the Diagnostic Menu, select "EVAP".
- Press the OK button.
- The screen will display EVAP test results. Use Up/Down buttons to view the current data flow.
5.11 Diagnostic Code Query (DTC Lookup)
To look up the definition of a specific diagnostic trouble code:
- From the main menu, select "DTC Lookup".
- Use the Up (▲) button to adjust the next digit of the code and the Down (▼) button to adjust the current digit.
- After inputting the full code, press OK to query its definition.
5.12 Battery Voltage
To check the vehicle's battery voltage in real-time:
- From the main menu, select "Battery".
- Press the OK button.
- The screen will display the current battery voltage.
6. Maintenance
The V318 OBD2 Scanner requires minimal maintenance. Keep the device clean and dry. Use a soft, damp cloth for cleaning. Do not use harsh chemicals or abrasive materials. Store the device in a safe place away from extreme temperatures and direct sunlight when not in use.
7. Troubleshooting
"Connection Error!" Displayed
If the scanner displays "Connection error!" on the screen, follow these steps:
- Confirm that the vehicle's ignition switch is turned ON.
- Check if the OBD II connector of the scanner is securely connected to the vehicle's DLC.
- Confirm that your vehicle is compliant with the OBD2 standard (generally 1996 and newer gasoline vehicles in the USA, and most domestic, Asian, and European vehicles).
- Turn off the ignition switch, wait for 10 seconds, then turn the ignition switch ON again.
If the "Connection error" message still appears, there might be a communication problem between the scanner and the vehicle's ECU (Engine Control Unit). In this case, please contact your local dealer or the manufacturer's Customer Service Department for assistance.
"Code is not stored in module!" Displayed
This message indicates that no diagnostic trouble codes are currently stored in the vehicle's module.
"Delete is failed." Displayed
If you receive this message when trying to erase codes, ensure the engine is turned off and the ignition is in the ON position. Wait a few seconds or press any button to return to the Diagnostic menu and try again.
8. User Tips
- Language Setting: The device supports multiple languages, including Korean. Ensure you set your preferred language in the 'Setup' menu for ease of use.
- Power Source: The scanner powers on automatically when plugged into the vehicle's OBD2 port. No separate power source is needed.
- Error Clearing: The device is effective at reading and clearing basic error codes, such as those caused by a loosely closed fuel cap.
- Compatibility: Note that this product is generally not compatible with new energy vehicles, hybrid vehicles, diesel vehicles, or non-OBD2 agreement models. Verify your vehicle's compatibility before use.
- Basic Diagnostics: While useful for basic inquiries and occasional error checking, it may not offer the same depth of diagnosis as professional-grade equipment.
9. Warranty and Support
We are committed to providing unparalleled customer support. This product comes with a limited warranty. The warranty does not cover:
- Abnormal use of the product, abnormal conditions, improper storage, exposure to moisture or humidity.
- Unauthorized modification, unauthorized maintenance, misuse, negligence, abuse, accident, alteration, improper installation, or other actions that are not malfunctions, including damage caused by transportation.
- Damage due to external reasons such as collision with objects, fire, flood, sand, dust, storm, lightning, earthquake, weather conditions, irresistible acts of natural disasters, battery leakage, theft, damage, or blown fuse.
- Any product damage caused by incorrect use of any power supply.
For further assistance or warranty claims, please contact your local dealer or the manufacturer's Customer Service Department.