1. Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Yecnecty Motorcycle Brake Clutch Lever Perch Bracket. This product is designed as a replacement part for specific Honda motorcycle models. Please read all instructions carefully before use.
2. Safety & Warnings
Important Safety Information:
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before use; do not use if damaged.
- Do not expose to water or moisture.
- Professional installation is recommended if you are unsure about any steps.
3. Package Contents
Please verify that all items are present and in good condition upon opening the package:
- 1 x Motorcycle Black Clutch Lever Perch Bracket
Note: Brake lever, clutch lever, and mirror are not included unless specified. This product is the perch bracket only.
4. Setup & Installation
This product is designed for specific motorcycle models. Ensure compatibility before proceeding with installation.
- Preparation: Ensure your motorcycle is stable and turned off. Gather necessary tools (e.g., wrenches, screwdrivers).
- Remove Old Part: Carefully remove the existing clutch lever perch bracket from your handlebar. Note the routing of any cables or wiring.
- Position New Bracket: Place the new Yecnecty perch bracket onto the handlebar in the desired position.
- Secure Clamp: Tighten the clamp bolts evenly until the bracket is secure on the handlebar. Do not overtighten, as this can damage the handlebar or the bracket.
- Install Lever and Mirror: Attach your clutch lever to the new perch bracket. If applicable, install your rearview mirror into the integrated mirror mount. Ensure threads are aligned and tighten securely.
- Connect Wiring: If your original perch included a clutch switch, connect the corresponding wiring to the new perch's switch terminals.
- Adjust: Adjust the position of the bracket and the clutch cable tension for comfortable and safe operation. Ensure full range of motion for the clutch lever without interference.
- Final Check: Before riding, thoroughly check all connections and ensure the clutch operates smoothly and correctly.

5. Operating Instructions
Once properly installed, the perch bracket serves as the mounting point for your motorcycle's clutch lever and, if applicable, your rearview mirror. Its operation is integrated with your motorcycle's standard controls.
- Ensure the clutch lever moves freely and returns to its resting position without sticking.
- Verify that the clutch engages and disengages smoothly.
- Confirm that the rearview mirror, if mounted, is stable and provides a clear view.
6. Maintenance
- Cleaning: Clean the perch bracket periodically with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Inspection: Regularly inspect the bracket for any signs of wear, cracks, or damage. Check that all mounting bolts remain tight.
- Lubrication: Ensure the clutch lever pivot point is adequately lubricated according to your motorcycle manufacturer's recommendations.
7. Troubleshooting
- Lever Feels Loose: Check the tightness of the handlebar clamp bolts and the pivot bolt for the clutch lever. Ensure they are secured properly.
- Clutch Not Engaging/Disengaging Properly: This is usually related to clutch cable adjustment. Refer to your motorcycle's service manual for proper clutch cable adjustment procedures.
- Product Appears Damaged or Breaks Prematurely: Ensure the product was installed correctly and not subjected to excessive force or improper use. Inspect for any manufacturing defects upon receipt. If issues persist, contact customer support.
8. Specifications
| Model Name | n0612(a) |
| Brand Name | Yecnecty |
| Material | Aluminum Alloy |
| Color | Black |
| Item Type | Ropes & Cables (Perch Bracket) |
| Condition | 100% Brand New |
| Package Dimensions (Approx.) | 17 cm (L) x 11 cm (W) x 5 cm (H) |
| Package Weight (Approx.) | 0.127 kg |
Compatibility:
This product is specifically designed for the following Honda motorcycle models:
- Honda CB400/SF
- Honda VTR250
- Honda Hornet 250
- Honda Jade 250
- Honda VT250
- Honda VT400
- Honda CB250
- Honda CBR250
- Honda CBR400
- Honda CB-1
Note: This is not a universal part. Please verify your motorcycle's make, model, and year against this list for proper fitment.
9. User Tips
- Verify Compatibility: Always double-check the compatibility list with your specific motorcycle model and year before purchasing and installing.
- Secure Installation: Ensure all mounting bolts for the perch bracket and any attached components (lever, mirror) are securely tightened to prevent loosening during operation. Refer to your motorcycle's service manual for recommended torque specifications.
- Regular Inspection: Periodically inspect the perch bracket for any signs of wear, damage, or loose fasteners to ensure continued safe operation.
- Mirror Tightening: When installing a mirror, ensure the threads are correctly aligned to avoid cross-threading. Tighten firmly but do not overtighten.
10. Frequently Asked Questions (FAQ)
- Q: Is this a universal part?
- A: No, this perch bracket is specifically designed for the Honda models listed in the compatibility section.
- Q: What material is this product made from?
- A: It is made from Aluminum Alloy.
- Q: How do I know if it will fit my motorcycle?
- A: Please refer to the