1. Introduction
The BLACKBIRD BB18 is an intelligent GPS bike computer designed to provide comprehensive cycling data. Featuring a clear large screen, multi-satellite positioning, and smart backlight, it enhances your riding experience by tracking various metrics and offering real-time segment information.
2. Safety Information
- Always ensure the device is securely mounted before riding.
- Do not attempt to disassemble or modify the device, as this may void the warranty and cause damage.
- Keep the device away from extreme temperatures and direct sunlight for prolonged periods.
- Ensure the charging port cover is properly sealed when not charging to maintain waterproofing.
- Always prioritize road safety. Do not operate the device in a way that distracts you from your surroundings.
3. Package Contents
Verify that all items are present in your package:
- BLACKBIRD BB18 Main Device
- Standard Mount
- Power Cord (Type-C)
- Instruction Manual (this document)
- Optional: Speed/Cadence Sensor (CS1), Heart Rate Sensor (HR1) - depending on the purchased bundle.
4. Device Overview
4.1. Buttons and Functions
| Function | Operation |
|---|---|
| Power on/off | Press and hold the left button for 2 seconds. |
| Start/Pause | Short press the left button to start or pause recording. |
| End/Save | Long press the right button while in recording state. |
| Switch Display | Short press the right button to switch data pages. |
| Setting Mode | Press both keys simultaneously for 2 seconds. |
| Factory Reset | When power is off and charging, press and hold both buttons simultaneously for 2 seconds. |
4.2. Display Icons
- Satellite Signal: Indicates GPS signal strength.
- One Power: Battery level indicator.
- Speed: Current speed.
- Pause: Indicates recording is paused.
- Heart Rate: Displays heart rate data (requires compatible sensor).
- Recording: Indicates active recording.
- Cadence: Displays cadence data (requires compatible sensor).
- Battery: Battery status.
4.3. Screen
The BB18 features a 2.4-inch clear large screen, providing excellent readability for all your cycling data.
5. Setup
5.1. Mounting the Device
- Combine the mount with the base, ensuring the two bumps match perfectly.
- Place the assembled base on your handlebars or stem. Ensure the three circles on the base are in a vertical direction.
- Install the rubber rings to secure the mount diagonally.
- To attach the bike computer, press it in horizontally, then rotate it 90 degrees to fix it securely.
5.2. Initial Power On and Satellite Positioning
Press and hold the left button for 2 seconds to power on the device. The BB18 will automatically search for satellites. For accurate positioning, ensure you are in an outdoor or unobstructed environment. The GPS icon in the upper left corner will indicate satellite signal status.
5.3. Setting Mode
To enter the setting mode, simultaneously press and hold both the left and right buttons for 2 seconds while the device is powered on. The setting mode consists of three pages:
- P1: Peripheral search page (for connecting sensors).
- P2: Unit switching page (e.g., km/h to mph).
- P3: Time zone setting page.
In setting mode, the left button adjusts values, and the right button switches between setting items. Long press the right button to save settings and exit.
6. Operating Instructions
6.1. Basic Operation
- Start/Pause: Short press the left button to begin or pause your ride recording.
- End/Save: Long press the right button while recording to end and save your ride data.
- Switch Data Pages: Short press the right button to cycle through different data display pages.
6.2. Data Pages
The BB18 can display up to 29 data items across 6 pages, with each page showing 7 items of data. The default data pages are:
- Page 1: Speed, Distance, Time, Altitude, Slope, Clock, Climb
- Page 2: Speed, Power, Cadence, Heart Rate, Slope, Distance, Climb
- Page 3: AVG SPD (Average Speed), AVG PWD (Average Power), AVGCAD (Average Cadence), AVG HRD (Average Heart Rate), ALT (Altitude), Clock, Climb
- Page 4: MAX SPD (Maximum Speed), MAX PWD (Maximum Power), MAX CAD (Maximum Cadence), MAX HRD (Maximum Heart Rate), ALT (Altitude), Clock, Temp (Temperature)
- Page 5: TOLAVG SPD (Total Average Speed), ODO (Odometer), TOT (Total Time), HRD (Heart Rate), ALT (Altitude), Clock, Temp (Temperature)
6.3. BLACKBIRD Cycling App
The BLACKBIRD BB18 can connect to the BLACKBIRD Cycling App for enhanced functionality, data management, and social sharing.
- Download the Blackbird Bike App from your device's app store or scan the QR code below.
- Open the App, log in or register your account. Ensure your phone's Wireless function is on and the bike computer is powered on.
- In the App, navigate to the search page and select "Device" > "Bike Computer" > "Connect".
- Select "BB18" from the list to connect and bind your device.
- After successful binding, you can customize the device's display pages and upload your ride records.
- You can also bind your Strava account within the App. Records will be automatically synchronized to Strava after each ride.
Watch a video demonstration of the product features and app connectivity:
Video 1: BLACKBIRD BB18 GPS Bike Computer Product Overview
6.4. Real-time Segment Function
The BB18 automatically identifies stage locations during your ride. When you are 50-100 meters from the start of a segment, a "Stage" icon will flash on the left side of the display. Upon entering the segment, the bike computer will automatically show the stage page. This page displays segment-specific data, with mileage recorded in reverse order (remaining distance to the end of the segment). The stage page is dynamic and will disappear once the segment is completed.
6.5. Intelligent Backlight
The device features an intelligent backlight that automatically adjusts based on ambient light conditions. It turns on automatically when you enter a tunnel or during sunrise/sunset, ensuring optimal visibility of your data.
7. Charging and Battery
- The BB18 uses a Type-C charging port.
- It supports charging while in use.
- When powered off, the display shows the time and battery icon. When powered on, the battery icon will flash during charging.
- If the device detects no movement for 5 minutes, it will automatically enter hibernation mode to save power. Press any button to wake it up.
- A full charge provides approximately 30 hours of battery life.
- If the screen displays "LP", it indicates low power and the device needs to be charged.
- Note that battery endurance may be reduced in low temperature environments.
8. Maintenance
- Cleaning: Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Waterproofing: The BB18 is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. However, avoid prolonged submersion and ensure the Type-C charging port cover is securely closed when not charging.
- Storage: Store the device in a cool, dry place when not in use. Avoid extreme temperatures.
- Battery Care: For optimal battery life, avoid fully discharging the device frequently. Charge it regularly, even if not in constant use.
9. Troubleshooting
- No GPS Signal: Ensure you are in an outdoor area with a clear view of the sky. If the GPS icon is not displayed, the device is not receiving satellite signals.
- Inaccurate Elevation/Time: If elevation data or time appears incorrect, reposition the device in an open environment for calibration and update.
- Device Not Responding: If the device is unresponsive, try performing a factory reset (see Section 4.1).
- "LP" Displayed: This indicates low power. Charge the device immediately using a DC 5V adapter.
- Sensors Not Connecting: Ensure sensors are powered on and within range. Enter setting mode (P1 peripheral search page) to search and connect to available sensors.
10. Specifications
| Feature | Detail |
|---|---|
| Model | BB18 |
| Brand | Blackbird |
| Type | Wireless Stopwatch (GPS Bike Computer) |
| Display Size | 2.4-inch |
| Display Color | Black and White |
| Touch Screen | Yes |
| Automatic Sleep | Yes |
| Auto-pause | Yes |
| External Devices | Yes |
| Charging Interface Type | Type-C |
| Waterproof Level | IPX7 |
| Navigation | No |
| Language | English |
| Certification | CE, FCC |
| Origin | Mainland China |
| Satellite Systems | GPS, BEIDOU, GLONASS, GALILEO |
| Battery Life | 30 hours |
| Weight | 72g |
| Dimensions (L*W*H) | 85*53*20 mm |
| Storage | 100 records (80 hours) |
11. User Tips
- Strava Integration: Easily pair your BB18 with Strava through the Blackbird Cycling App to automatically sync your ride data.
- Route Tracking: The device effectively shows your route, providing valuable navigation and tracking information during your rides.
- Customization: Take advantage of the app to customize your data display pages to show the metrics most important to you.
12. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller or the official Blackbird website. Keep your proof of purchase for any warranty claims.
A detailed user manual in PDF format is also available for download: BLACKBIRD BB18 User Manual (PDF).