1. Introduction
Thank you for choosing the Aigo AK 500W PC Power Supply Unit. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new power supply. The Aigo AK500 is a non-modular 500W ATX power supply designed for desktop and server applications, featuring a quiet 120mm fan and multiple protection technologies.
2. Safety Information
- Electrical Hazard: Do not remove the power supply unit cover under any circumstances. There are no user-serviceable parts inside, and opening the unit can expose you to dangerous voltages.
- Voltage Compatibility: This power supply is designed for an AC input voltage of 200-240VAC. It is NOT compatible with 110V power systems. Ensure your region's voltage matches this requirement before connecting.
- Environmental Conditions: This unit is intended for use only below 2000 meters altitude and in non-tropical climates.
- Professional Installation: Equipment installation must comply with local and national electrical codes. If you are unsure about any steps, consult a qualified technician.
- Ventilation: Ensure adequate airflow around the power supply. Do not block the fan or ventilation openings.
3. Package Contents
The Aigo AK 500W Power Supply Unit package typically includes:
- 1 x Aigo AK 500W PC Power Supply Unit (Model AK500)
- 1 x AC Power Cable (EU Plug)
- Mounting Screws (typically 4)
- Cable Ties (for cable management)
4. Specifications
General Specifications
| Feature | Detail |
|---|---|
| Model Number | AK500 |
| Rating Power | 500W |
| PFC Type | PASSIVE |
| Fans | 1 (120mm RGB Fan) |
| Modular | Non-Modular |
| Application | Desktop, Server |
| 80 PLUS Certification | Other Certification |
| Certification | CE, FCC, RoHS |
Electrical Specifications
| Parameter | Value |
|---|---|
| AC Input | 200-240VAC, 10A, 50-60Hz |
| +12V Max Current | 41A |
| +12V Max Power | 492W |
| +5V Max Current | 15A |
| +5V Max Power | 100W |
| +3.3V Max Current | 15A |
| +3.3V Max Power | 100W |
| -12V Max Current | 0.3A |
| -12V Max Power | 3.6W |
| +5Vsb Max Current | 2.5A |
| +5Vsb Max Power | 12.5W |
Connector Types
| Connector | Quantity |
|---|---|
| MB 20+4 PINS (Main ATX) | 1 |
| CPU 4+4 PINS (EPS/ATX 12V) | 1 |
| PCI-E 6+2 PINS (VGA) | 2 |
| SATA | 4 |
| D-type Bus (Molex) | 3 |
Physical Dimensions
- Length: 28 cm
- Width: 18 cm
- Height: 12 cm
- Weight: 1.271 kg
5. Installation Guide
Before beginning installation, ensure your computer is powered off and unplugged from the wall outlet. Always ground yourself to prevent electrostatic discharge (ESD) damage to components.
-
General Case Installation
Install the power supply at its designated location within your PC case. Use a screwdriver (typically a Phillips head) to secure the power supply in place with the provided mounting screws.
-
20+4 Pin Motherboard Connection
Locate the main 20+4 pin power cable from the power supply. Connect it firmly to the long, rectangular port on your motherboard. Ensure it clicks into place.
-
SATA HDD/SSD Connection
Use the smaller SATA power cables to connect your SATA hard drives and solid-state drives to the power supply.
-
6+2 Pin VGA (Graphics Card) Connection
Connect the 6+2 pin PCIe power cables to your graphics card. This PSU provides two 6+2 pin connectors. Ensure your graphics card's power requirements are met.
PCIe power cable connected to a graphics card. -
Lighting System Connection (Optional)
If your system includes a lighting system that requires a 4-pin power connection, use the appropriate cable from the power supply to connect it.
-
4-Pin or 8-Pin CPU Power Connection
Connect the 4+4 pin CPU power connector to the corresponding port on your motherboard. If your motherboard only requires a 4-pin connection, you can use just one half of the 4+4 pin connector.
6. Operating Instructions
- After completing all cable connections, ensure they are secure and properly seated.
- Plug the AC power cable into the power supply's inlet and then into a compatible 200-240VAC wall outlet.
- Flip the power switch on the back of the power supply to the 'ON' (I) position.
- You can now power on your computer using its front panel power button.
7. Maintenance
- Dust Cleaning: Regularly clean dust from the power supply's fan and ventilation grilles using compressed air. Ensure the computer is powered off and unplugged before cleaning.
- Airflow: Ensure that the power supply's fan and vents are not obstructed by cables or other components to maintain optimal cooling.
- Do Not Open: As stated in the safety information, do not attempt to open the power supply unit. This will void the warranty and poses a significant electrical hazard.
8. Troubleshooting
- No Power:
- Check if the AC power cable is securely connected to both the PSU and the wall outlet.
- Ensure the power switch on the back of the PSU is in the 'ON' (I) position.
- Verify the wall outlet is functional by plugging in another device.
- Check all internal power connections (24-pin ATX, CPU, PCIe) are firmly seated.
- System Instability/Crashes:
- Ensure your system's total power consumption does not exceed the PSU's 500W rating.
- Verify all power cables are correctly connected to components (motherboard, CPU, GPU, drives).
- If you suspect voltage issues, use a multimeter to check the output voltages (only if you are experienced and comfortable working with live electrical components).
- Fan Noise:
- While the Aigo AK500 is designed for quiet operation, excessive noise might indicate an obstruction. Power off and unplug the PC, then carefully check the fan for any foreign objects.
- Ensure the PSU is mounted securely to prevent vibrations.
- Graphics Card Not Powering On:
- Confirm your graphics card's power requirements. This PSU provides two 6+2 pin PCIe connectors. Ensure all necessary connectors are used.
- Verify the PCIe power cables are fully inserted into both the PSU and the graphics card.
9. User Tips
- Users frequently praise the Aigo AK500 for its quiet operation, making it suitable for systems where low noise is desired.
- The non-modular design offers simple and effective wiring, which can be beneficial for straightforward PC builds.
- Always double-check the input voltage requirement (200-240VAC) to avoid damage, especially if you are in a region with 110V mains power.
10. Frequently Asked Questions (FAQ)
- Q: How many power supply units are included in the package?
- A: One (1) Aigo AK 500W PC Power Supply Unit is included.
- Q: Can I use this PSU in a region with 110V electricity?
- A: No, this power supply unit is designed for 200-240VAC input only and is not compatible with 110V systems.
- Q: Does this PSU have an 8-pin CPU power connector?
- A: Yes, it includes one 4+4 pin CPU power connector, which can be used as an 8-pin or 4-pin connector as needed.
- Q: How many power connectors does it have for graphics cards?
- A: The Aigo AK500 provides two (2) 6+2 pin PCIe power connectors for graphics cards.
11. Warranty and Support
For detailed warranty information, technical support, or service inquiries, please refer to the official documentation provided with your product or contact the manufacturer/seller directly. A user manual in PDF format is available for further reference, which may contain additional warranty details.
You can typically find the official user manual PDF at the following link: Aigo AK Series User Manual (PDF)