1. Introduction
The Tedeligo WiFi RF Smart Curtain Switch Module (Model STC002) is a versatile device designed to integrate your curtains, roller shutters, or garage doors into your smart home system. It supports control via WiFi (Tuya Smart Life app), RF 433MHz remote controls, and voice commands through popular smart assistants like Amazon Alexa and Google Assistant. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure a seamless user experience.

2. Specifications
| Feature | Specification |
|---|---|
| Model Number | Tede STC002 |
| Working Voltage | AC 100-240V |
| Max Current | 10A (resistive load) / 3A (inductive load) |
| Wattage | 2000-3000 W |
| Standby Power | 0.2W |
| Output Type | Active Output |
| WiFi Standard | 2.4GHz IEEE 802.11 b/g/n |
| RF Frequency | 433MHz 1527 learning code |
| Receiving Sensitivity | -97dBm |
| RF Storage Amount | 20 pieces (remotes) |
| Operating Mode | Superheterodyne wireless reception |
| RF Receiving Range | About 30-50 meters indoor |
| Working Temperature | -30℃ to +60℃ |
| Curtain Switch Module Size | 40*40*22 mm |
| RF Wall Switch Size | 86*86 mm |
| RF Wall Switch Battery | 1*27a12v (included) |
| Control Method | RF + WiFi + Voice |
| Voice Support | Alexa, Google Assistant Home |
3. Setup
3.1. Wiring Diagram
Ensure power is OFF before performing any wiring. Incorrect wiring can damage the device or cause electric shock. Consult a qualified electrician if you are unsure.

Wiring with Manual Switch:
- Connect the AC 100-240V input (Live and Neutral) to the L and N terminals of the module.
- Connect the AC Motor's Live, Neutral, and Earth wires. The motor's Live wires (typically for Up/Down movement) connect to L1 and L2 terminals on the module. The motor's Neutral connects to N.
- Connect the manual panel switch to the S1 and S2 terminals on the module.
Wiring Without Manual Switch:
- Connect the AC 100-240V input (Live and Neutral) to the L and N terminals of the module.
- Connect the AC Motor's Live, Neutral, and Earth wires. The motor's Live wires (typically for Up/Down movement) connect to L1 and L2 terminals on the module. The motor's Neutral connects to N.
- In this configuration, control will be exclusively via RF remote, app, or voice commands.
3.2. APP Download
Download the