Introduction
Thank you for purchasing the T&G TG116c Portable Bluetooth Speaker. This manual provides detailed instructions for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. Please read this manual carefully before use and retain it for future reference.
The T&G TG116c speaker is designed for portability with uncompromising sound quality.
Product Overview
Features:
- Advanced wireless audio decoding chip for device connection.
- Support for FM radio, automatic station search.
- Clear and bright sound with Hi-Fi speaker.
- Direct playback from TF card and USB drive (MP3 format).
- Wireless working distance up to 10 meters.
- AUX line-in for connecting external devices (tablet PC, TV, cell phones).
- Automatic shutdown after 30 minutes of wireless disconnection.
- True Wireless Stereo (TWS) function for pairing two speakers.
- IPX5 waterproof splash design.
- Built-in microphone for hands-free calls.
Controls and Ports:
Detailed view of the speaker's control panel and input/output ports.
- DC 5V Slot: Standard Micro USB V8 port for charging the speaker.
- TF Slot: Insert a TF (Micro SD) card here to decode and play MP3 format audio.
- USB Slot: Insert a USB drive here to decode and play MP3 format audio.
- LINE IN Slot: 3.5mm audio input for connecting external audio devices.
- Previous Track / Volume Down (-): Short press for previous track; long press to decrease volume.
- Next Track / Volume Up (+): Short press for next track; long press to increase volume.
- Mode (M): Short press to switch between modes (TF card, LINE IN, USB, Wireless, FM). Long press for 2-3 seconds in Wireless mode (without a paired device) to initiate TWS pairing.
- Power Button / Play/Pause / Call Control: Long press to power ON/OFF. Short press to play/pause music. In FM mode, short press to auto-search stations, press again to stop searching. In Wireless mode with a paired phone, short press to answer/hang up calls, double press to redial.
Side view of the speaker showing the various input ports.
Specifications
| Feature | Specification |
|---|---|
| Wireless Version | V5.3 |
| Supported Protocols | L2CAP/A2DP/AVRCP, HSP/HFP |
| Working Distance | Up to 10 meters |
| Signal-to-Noise Ratio (SNR) | ≥90dB |
| Battery Capacity | 1200mAh |
| Built-in Voltage | 3.7V |
| Normal Volume Playback Time | Approximately 3 hours |
| Speaker Driver | 52mm * 2 |
| Speaker Power | 5W * 2 |
| Frequency Response | 150Hz-20KHz |
| Unit Dimensions (L x W x H) | 80mm x 80mm x 180mm |
| Unit Weight | 557g |
| Charging Voltage/Current | 5V/500mA |
| Charging Time | 3-4 hours |
| Waterproof Rating | IPX5 (Splash-proof) |
| Communication | USB, Bluetooth, Audio Line |
| Playback Function | Radio, MP3 |
| Certifications | CE, FCC, RoHS |
Setup Guide
1. Charging the Speaker
Before first use, fully charge the speaker. Connect the provided Micro USB charging cable to the DC 5V slot (1) on the speaker and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The charging indicator light will show the charging status. A full charge typically takes 3-4 hours.
Speaker with charging and AUX cables.
2. Powering On/Off
Long press the Power Button (8) to turn the speaker ON or OFF.
3. Bluetooth Pairing
- Turn on the speaker. It will automatically enter Wireless (Bluetooth) mode.
- On your mobile device (phone, tablet, computer), enable Bluetooth and search for available devices.
- Select "TG116c" from the list of devices.
- Once paired, the speaker will emit a confirmation sound.
Bluetooth 5.3 for seamless wireless connection.
4. True Wireless Stereo (TWS) Pairing
To achieve 3D stereo sound, you can pair two TG116c speakers together:
- Ensure both TG116c speakers are powered ON and in Wireless (Bluetooth) mode, but NOT paired to any mobile device.
- On one of the speakers, long press the Mode (M) button (7) for 2-3 seconds until you hear a "du du du" hint sound. The button light on this speaker should stop flashing, indicating successful TWS pairing.
- Now, connect your mobile device to the primary speaker via Bluetooth as described in step 3. Both speakers will play audio in stereo.
Connect two speakers for an immersive 3D stereo sound experience.
5. AUX-in Connection
Use a 3.5mm audio cable (not always included, check package contents) to connect the LINE IN slot (4) on the speaker to the audio output of an external device. The speaker will automatically switch to AUX mode.
6. USB Drive / TF Card Playback
Insert a USB drive into the USB Slot (3) or a TF (Micro SD) card into the TF Slot (2). The speaker will automatically detect the storage and begin playing MP3 format audio files. Ensure your USB drive or TF card is formatted to FAT32.
Operating Instructions
Music Playback
- Play/Pause: Short press the Power Button (8).
- Volume Up: Long press the '+' button (6).
- Volume Down: Long press the '-' button (5).
- Next Track: Short press the '+' button (6).
- Previous Track: Short press the '-' button (5).
Mode Switching
Short press the Mode (M) button (7) to cycle through available modes: TF Card, LINE IN, USB, Wireless (Bluetooth), and FM Radio.
Hands-Free Calling
When your phone is paired via Bluetooth and a call comes in:
- Answer/End Call: Short press the Power Button (8).
- Redial Last Number: Double press the Power Button (8).
FM Radio
- Switch to FM mode using the Mode (M) button (7).
- For better reception, insert the Micro USB charging cable into the DC 5V slot (1) as an antenna.
- Short press the Power Button (8) to automatically search for available radio stations.
- Short press the Power Button (8) again to stop the automatic search.
- Use the '+' and '-' buttons (6 and 5) to navigate between stations.
Maintenance
- Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Keep the speaker away from extreme temperatures, direct sunlight, and excessive moisture.
- Ensure all ports are dry before charging or connecting cables, especially after exposure to water.
- When not in use for extended periods, charge the speaker at least once every three months to maintain battery health.
- Avoid dropping or subjecting the speaker to strong impacts.
The IPX5 waterproof design protects against splashes, but avoid submersion.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not turn on. | Low battery. | Charge the speaker fully. |
| Cannot pair via Bluetooth. | Speaker is already paired, or device Bluetooth is off/out of range. | Ensure speaker is in pairing mode. Turn off and on Bluetooth on your device. Move closer to the speaker. |
| No sound from speaker. | Volume too low, incorrect mode, or device not playing. | Increase volume. Check mode (Bluetooth, AUX, USB/TF). Ensure audio is playing on the connected device. |
| Poor FM radio reception. | No antenna connected or weak signal. | Insert the Micro USB charging cable into the DC 5V slot to act as an antenna. Try moving to a different location. |
| USB/TF card not playing. | Incorrect file format or card not formatted to FAT32. | Ensure audio files are MP3 format. Format the card to FAT32. |
User Tips
- Optimal Charging: Always ensure the speaker is properly charged for best performance and battery longevity.
- Sound Quality: Many users find the sound quality to be very good for the speaker's compact size, even at higher volumes.
- Bluetooth Connection: The speaker is generally easy to connect via Bluetooth, making setup quick and hassle-free.
- Volume Expectations: While the speaker offers good sound, some users note that the maximum volume might not be as loud as desired, especially when playing audio from a phone.
Frequently Asked Questions (FAQ)
- Q: How does the speaker communicate with devices?
- A: The speaker communicates primarily via Bluetooth. It also supports audio input through a USB port (for USB drives) and an AUX-in port (for audio cables).
- Q: Does it have a headphone jack?
- A: The speaker has a 3.5mm LINE IN port, which is an audio input for connecting external devices. It is not a headphone output.
- Q: How do I connect to FM radio?
- A: Switch the speaker to FM mode using the 'M' button. For improved reception, insert the Micro USB charging cable into the DC 5V port; it acts as an antenna. Then, short press the Power button to auto-search for stations.
Warranty & Support
For any issues or questions not covered in this manual, please contact the seller or manufacturer's customer support. Please refer to the official product page or packaging for specific warranty details and contact information.
A PDF version of this user manual is available for download. Please refer to the product listing for the link to the official PDF document: View User Manual (PDF)