1. Introduction
This manual provides detailed instructions for the installation, setup, and operation of your MatSee Plus Tuya Smart ZigBee Energy Meter. This device is designed to monitor electricity consumption and generation in real-time, offering bidirectional measurement for 1 or 2 channels. It integrates with the Tuya Smart or Smart Life application, allowing you to track energy usage and statistics from your smartphone.
For additional documentation, please refer to the User manual (PDF).
2. Safety Information
WARNING: Failure to follow these instructions may result in death, serious injury, fire, electric shock, or damage to the Power Clamp and other property.
2.1. Safety Installation
- The power clamp must be installed and serviced only by qualified electrical personnel.
- Do not touch the terminals of the device during testing.
- Turn off all power supply for this equipment before installing.
- Make sure that the power supply is off before connecting or disconnecting it to an auxiliary device.
- Always use a properly rated voltage sensing device to confirm power is off.
DANGER ELECTRIC SHOCK
2.2. Safety Handling
- Avoid high humidity or extreme temperatures.
- Avoid long exposure to direct sunlight or strong ultraviolet light.
- Do not drop or expose the unit to intense vibration.
- Do not disassemble or try to repair the unit on your own.
- Do not expose the unit or its accessories to flammable liquids, gases, or other explosives.
2.3. Uninstalling the Clamp
WARNING: FOR SAFETY. If you need to remove the current transformer clamp, please be sure to turn off the power of the measuring device first, otherwise there is a risk of electric shock.
3. Technical Specifications
| Feature | Specification |
|---|---|
| Input Voltage | AC 100-240V 50/60Hz |
| Measuring Range | 0.2-80A |
| Wireless Frequency | 2.4GHz (Zigbee) |
| Measurement Error | Within ±2% |
| Module Size | 50*45*23mm |
| Clamp Diameter | 10mm |
| Clamp Cable Length | 1m |
| Working Temperature | -10 °C ~ +55 °C |
| Communication Method | Zigbee |
| Camera Equipped | No |
| State of Assembly | Ready-to-Go |
| Compatibility | All Compatible (Tuya Smart, Smart Life) |
| Certification | CE, RoHS |
| Gateway Required | Tuya ZigBee Gateway is required |
| Channel Options | 1 and 2 Channel available |
Figure 1: Dimensions of the Energy Meter and CT Clamp
Figure 2: 35mm DIN Rail Mounting
4. Package Contents
The package typically includes:
- MatSee Plus ZigBee Energy Meter (1 or 2 channel version)
- Current Transformer (CT) Clamps (1 or 2, depending on channel version)
- User Manual (this document, also available as PDF)
Figure 3: MatSee Plus Energy Meter and CT Clamps
5. Setup Guide
5.1. Download the App
To control and monitor your energy meter, you need to download the 'Smart Life' or 'Tuya Smart' application on your smartphone.
- Scan the QR codes below using your phone's camera or a QR code scanner app.
- Alternatively, search for 'Smart Life' or 'Tuya Smart' in the App Store (iOS) or Google Play Store (Android).
- Install the application.
Figure 4: QR Codes for Smart Life and Tuya Smart Apps
5.2. Add the ZigBee Meter to the App
Note: ZigBee meters require a Tuya ZigBee Gateway to function properly and connect to the app.
- Ensure your ZigBee Gateway is powered on and connected to your home network.
- Open the Smart Life or Tuya Smart app.
- In the app, navigate to your Wireless Zigbee Gateway.
- Press and hold the reset button on the energy meter for approximately 5 seconds until the red LED light flashes quickly. This indicates pairing mode.
- In the app, tap 'Add subdevice' under your Zigbee Gateway.
- Confirm that the device is in pairing mode (LED blinking) in the app.
- The app will discover and add the device. Once successfully added, tap 'Done'.
Figure 5: Adding ZigBee Meter to App
Figure 6: Device Successfully Added
Note: If you have a WiFi version of the meter, the process is similar but you would select 'Smart meter (Wi-Fi)' and connect directly to your 2.4GHz Wi-Fi network.
Figure 7: Adding WiFi Meter (if applicable)
Figure 8: WiFi Device Successfully Added (if applicable)
5.3. Wiring Diagram
Proper wiring is crucial for accurate measurement and safe operation. Always ensure power is off before wiring.
5.3.1. To Measure Energy Consumption and Generation (e.g., with Solar Panel)
Figure 9: Wiring for Consumption and Generation
5.3.2. To Measure 'from Grid' or 'to Grid'
Figure 10: Wiring for Grid Flow Measurement
Important Note for Wiring:
- When installing, please ensure that the circuit measured by the Current Transformer (CT) is in the same phase as the circuit powered by the module.
- The meter requires both Line (L) and Neutral (N) connections for power.
- The CT clamps (S1, S2) connect to the meter.
5.4. Current Transformer (CT) Clamp Direction
The direction of the CT clamp is critical for accurate bidirectional measurement. The app will indicate if the measurement is 'Forward' or 'Reverse'.
- Place the clamp on the wire you wish to measure (either live or neutral, but not both).
- If your solar system is actively generating power, adjust the clamp's direction until the App shows 'Reverse'.
- If your solar system is not generating (or you are only measuring consumption), adjust the clamp's direction until the App shows 'Forward'.
- Repeat this process for each channel/clamp.
Figure 11: App Interface for Clamp Direction (Forward/Reverse)
WARNING: FOR SAFETY. If you need to remove the current transformer clamp, please be sure to turn off the power of the measuring device first, otherwise there is a risk of electric shock.
6. Operating Instructions
6.1. Monitoring Electricity Usage
Once the meter is successfully added and wired, you can monitor real-time electricity data through the app.
- Open the Smart Life or Tuya Smart app and select your energy meter device.
- The main screen will display real-time data such as Total Energy (Forward/Reverse), Voltage, Frequency, Total Power, Power Factor, Current, and Power for each channel.
- Navigate between 'Channel A', 'Channel B', and 'Total' tabs to view specific data.
- The 'Energy Monitor' section provides historical data, allowing you to view daily, monthly, and yearly electricity statistics.
Figure 12: Electricity Statistics in App
Video 1: Demonstration of Zigbee Pairing and App Usage
6.2. Adjusting Reporting Frequency
You can adjust how often the device reports data to the app. This setting is found in the device's calibration or settings menu within the app.
- From the device's main screen in the app, tap on 'Calibration' or the settings icon.
- Locate 'report_rate_control' or 'adjust reporting frequency'.
- Select your desired reporting interval (e.g., 6s, 10s).
- Confirm the change.
Figure 13: Adjusting Report Rate Control
7. Maintenance
- Keep the device clean and free from dust. Use a dry, soft cloth for cleaning.
- Ensure the device is installed in a location that adheres to the specified working temperature and humidity ranges.
- Regularly check wiring connections for any signs of wear or damage.
- Keep the app updated to the latest version for optimal performance and features.
8. Troubleshooting
8.1. App Shows Current and Power as '0'
Q: After I configure it with the App, why does the App show 'Current' and 'Power' as '0'?
A: This typically occurs if the CT clamp is not correctly installed. Only if you place a device's wire (either live wire or neutral wire, but not both) through the clamp, and the device is turned on, can the clamp sense the current. Ensure the wire passes through the clamp and the monitored device is active. The App will then display current and power values.
Figure 14: Incorrect CT Clamp Placement Resulting in Zero Readings
8.2. App Seems Stuck After Changing Report Rate
Q: After I change the report rate to less than 10 seconds, why does my App seem stuck?
A: This is likely due to a slow network return. Please sign out of the App and re-enter to change the rate back to 10 seconds. This should resolve the issue.
8.3. How to Clear App Electricity Data
Q: How do I clear App electricity data?
A: Follow these steps to clear the stored electricity data:
- Quickly press the reset button on the energy meter 5 times. The indicator LED should blink quickly. If it doesn't, repeat the action until it blinks quickly.
- After 10 seconds, go to the App page for your device.
- Click 'Disconnect and wipe data'.
Figure 15: Clearing Electricity Data
8.4. General Zigbee Connectivity Issues
If you experience issues with Zigbee connectivity:
- Ensure your Zigbee gateway is within range and functioning correctly.
- Check for any physical obstructions or interference sources (e.g., other 2.4GHz devices).
- Try resetting the energy meter and re-pairing it with your Zigbee gateway.
- Verify that your Zigbee gateway's firmware and the Smart Life/Tuya Smart app are up to date.
9. User Tips
- Home Assistant Integration: Many users report successful integration with Home Assistant using Zigbee2MQTT or ZHA. For ZHA, you might need to install specific 'quirks' (e.g., the v2 quirk for model TS0601) to expose all CTs and values.
- CT Clamp Placement: For accurate readings, ensure the CT clamp is placed on a single phase or neutral wire only, not both. It is suitable for electrical panels but for individual machines, a plug-in power meter might be more appropriate.
- Low Current Accuracy: Be aware that with very low currents (below 0.2A), the device may not provide accurate measurements. There might also be interference from other nearby cables.
- Bidirectional Measurement: This meter is excellent for monitoring both consumption and production, especially for photovoltaic (solar) energy systems.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.