Hongwin BS15-41-3802900, BS15-3802900, S1701L21153-50012, 5T14-3802080

Contents

Hongwin Vehicle Speed Sensor User Manual

Models: BS15-41-3802900, BS15-3802900, S1701L21153-50012, 5T14-3802080

1. Introduction

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Hongwin Vehicle Speed Sensor. This sensor is designed to accurately measure vehicle speed and transmit this data to the vehicle's electronic control unit (ECU) or odometer, ensuring proper functioning of various vehicle systems.

2. Safety Information

Please read and understand the following safety precautions before handling or installing the product:

  • Always disconnect the vehicle's battery before performing any electrical work to prevent electrical shock or damage to components.
  • Wear appropriate personal protective equipment (PPE) such as gloves and eye protection.
  • Ensure the vehicle is securely supported on jack stands if working underneath it.
  • Exercise caution when handling the sensor plug and wiring to avoid damage.
  • WARNING: To avoid danger of suffocation, keep any plastic packaging away from babies and children. Do not use this bag in cribs, beds, carriages, or play pens. This bag is not a toy.

3. Product Overview

The Hongwin Vehicle Speed Sensor is a magnetic induction type sensor available in several variants, primarily distinguished by the number of teeth on its gear. It is crucial to select the correct sensor variant that matches your vehicle's original specifications.

3.1 Sensor Variants

The sensor is available with different tooth counts to ensure compatibility with various vehicle models. Common variants include 28 teeth, 30 teeth, and 31 teeth.

Three Hongwin Vehicle Speed Sensors with 30, 28, and 31 teeth gears, showing their respective OE numbers.
Figure 1: Different sensor variants (30, 28, 31 teeth) and their corresponding OE numbers.

3.2 Key Components

  • Sensor Body: Houses the magnetic induction components.
  • Gear: Engages with the transmission to measure rotational speed.
  • Electrical Connector: Provides the interface for electrical connection to the vehicle's wiring harness.
Close-up view of the 3-pin electrical connector on a vehicle speed sensor.
Figure 2: Close-up of the sensor's electrical connector.

4. Specifications

AttributeValue
TypeVehicle Speed Sensor
Sensor TypeMagnetic Induction
Repeatability35011D12
Measuring Range (OE#)BS15-41-3802900, BS15-3802900, S1701L21153-50012, 5T14-3802080
Sensitivity (OE#)BS15-51-3802900A 46510-39000 4651039000
OEM NO.BS15-3802900A, BS153802900A, BS15413802900, BS153802900, S1701L2115350012, 5T143802080
OriginMainland China
High-concerned chemicalNone
Available Teeth Counts28 Teeth, 30 teeth, 31 teeth (black)
Package Weight0.13 kg
Package Dimensions (L x W x H)10 cm x 10 cm x 10 cm

4.1 Dimensions (Example for 31-tooth sensor)

Detailed dimensions of a 31-tooth vehicle speed sensor, showing overall length of 106mm, gear diameter 26mm, body diameter 22mm, and connector dimensions.
Figure 3: Detailed dimensions for the 31-tooth sensor (BS15-3802900A).
  • Overall Length: 106mm
  • Gear Diameter: 26mm
  • Body Diameter: 22mm
  • Connector Width: 17mm
  • Connector Length: 17mm
  • Connector Height: 7mm
  • Mounting Hole Diameter: 8mm

5. Installation

Installation of a vehicle speed sensor typically involves replacing the existing sensor. Always refer to your vehicle's specific service manual for detailed instructions and torque specifications.

5.1 Pre-Installation Checks

  1. Verify that the new sensor's OE number and tooth count match your vehicle's original sensor.
  2. Inspect the new sensor for any visible damage.
  3. Ensure the vehicle's ignition is off and the battery is disconnected.

5.2 Installation Steps (General)

  1. Locate the existing vehicle speed sensor on your transmission.
  2. Carefully disconnect the electrical connector from the old sensor.
  3. Remove the retaining bolt or clip that secures the sensor.
  4. Gently pull out the old sensor from its housing.
  5. Clean the sensor mounting area on the transmission.
  6. Apply a small amount of transmission fluid or appropriate lubricant to the O-ring of the new sensor.
  7. Insert the new Hongwin sensor into the transmission housing, ensuring the gear meshes correctly.
  8. Secure the sensor with the retaining bolt or clip. Tighten to manufacturer's specifications.
  9. Connect the electrical plug to the new sensor. Ensure it clicks into place. Take care with the plug to avoid damage.
  10. Reconnect the vehicle's battery.
  11. Start the vehicle and check for proper operation and absence of warning lights.

6. Operating

Once correctly installed, the Hongwin Vehicle Speed Sensor operates automatically. It generates electrical pulses proportional to the rotational speed of the transmission gear, which are then interpreted by the vehicle's ECU to determine road speed. This information is vital for the speedometer, odometer, cruise control, and other vehicle systems.

7. Maintenance

Vehicle speed sensors are generally maintenance-free. However, periodic inspection can help ensure longevity and proper function:

  • Visual Inspection: During routine vehicle maintenance, visually inspect the sensor and its wiring for any signs of damage, corrosion, or loose connections.
  • Cleaning: If accessible, gently clean any accumulated dirt or debris from the sensor body and connector using a soft cloth. Avoid harsh chemicals.

8. Troubleshooting

If you experience issues related to vehicle speed readings, consider the following:

  • No Speedometer Reading / Inaccurate Speed:
    • Check the electrical connection to the sensor for looseness or corrosion.
    • Inspect the sensor wiring for cuts or damage.
    • Verify that the correct sensor (matching OE number and tooth count) was installed.
    • A faulty sensor may require replacement.
  • Check Engine Light (CEL) / Diagnostic Trouble Codes (DTCs):
    • Use an OBD-II scanner to retrieve any stored DTCs related to vehicle speed sensors. Common codes include P0500 (Vehicle Speed Sensor Malfunction).
    • Follow the diagnostic procedures outlined in your vehicle's service manual for specific DTCs.

9. User Tips

  • Match Tooth Count: Always ensure the tooth count of the replacement sensor (e.g., 27, 28, 30, 31 teeth) precisely matches your vehicle's original sensor. Incorrect tooth count can lead to inaccurate speed readings or compatibility issues.
  • Verify OEM Numbers: Cross-reference the OEM part numbers provided with your vehicle's requirements to ensure proper fitment and function.
  • Professional Installation: If you are unsure about the installation process, it is recommended to seek assistance from a qualified automotive technician.

10. Warranty and Support

For any questions or support regarding your Hongwin Vehicle Speed Sensor, please contact the manufacturer directly:

  • Brand: Hongwin
  • Manufacturer: Wenzhou Haowei Auto Parts Co., Ltd.
  • Customer Service Email: inf@hwautoparts.com
  • Telephone: 86-18005775583
  • Manufacturer Address: Floor 2, Building 8 (West), Hantian Hardware and Electrical City, Tangxia Town, Ruian City, Zhejiang Province, China

For European inquiries, you may contact the representative office:

  • Representative: MJCM SARL
  • Representative Address: CN-78 avenue des Champs Elysees Bureau 326
  • Telephone: 33-767213611
  • E-mail: mjcm190928@gmail.com

Additional item guides and documents, including a PDF user manual, may be available for download. Please refer to the official product page or contact customer support for more information. A PDF user manual is available at: User manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.