1. Product Overview
This OPUYYM 3x18650 DIY Power Bank Case allows you to create your own portable power bank using three 18650 flat-head batteries (not included). It features dual input (Micro USB and Type-C) and dual USB output, enabling fast charging for various devices.


2. Setup and Battery Installation
This product is a solderless mobile power supply kit. Batteries are NOT included and must be purchased separately. Ensure you use 18650 flat-head batteries with consistent capacity.
2.1 Important Considerations:
- Battery Type: Use only 18650 flat-head batteries.
- Battery Condition: Before installation, test whether each battery is normal and usable.
- Capacity Consistency: All three 18650 battery cells must be of the same capacity and cannot be mixed together.
- Polarity: Incorrect battery installation (upside down) will damage the motherboard. The spring contact is the negative pole, and the flat contact is the positive pole.
- Lid Closure: The case is designed for a single, permanent closure. Once the lid is closed, it cannot be easily disassembled again without potentially damaging the case. Ensure all batteries are correctly installed and tested before final closure.
2.2 Installation Steps:
- Open the power bank case.
- Verify the polarity markings inside the case. The protruding point surface of the shrapnel is for the positive pole of the battery. The coil surface of the shrapnel is for the negative pole of the battery.
- Insert each 18650 battery, aligning the positive pole of the battery with the protruding point surface and the negative pole with the coil surface. Ensure all batteries are inserted in the correct orientation.
- After installing all batteries, test the normal charge and discharge functions of the power bank.
- Once confirmed working, carefully close the lid. Note that the lid is designed for a secure, one-time closure.

3. Operating Instructions
3.1 Charging the Power Bank:
- Connect a 5V2A power adapter to either the Micro USB or Type-C input port on the power bank case.
- The internal display (if functional) or indicator lights will show the charging status.
3.2 Charging External Devices:
- Connect your device (smartphone, tablet, headphones, etc.) to one of the dual USB output ports using a compatible charging cable.
- The power bank provides 5V2A output for charging.
- The power bank can charge two devices simultaneously.


4. Maintenance
- Keep the power bank case clean and dry. Avoid exposure to moisture or extreme temperatures.
- Do not attempt to open the case once it has been sealed, as it is not designed for secondary disassembly.
- Store the power bank in a cool, dry place when not in use.
5. Troubleshooting
- Device not charging:
- Ensure batteries are correctly installed with proper polarity.
- Check if the batteries are charged.
- Verify the charging cable is securely connected to both the power bank and the device.
- Try a different charging cable or device to isolate the issue.
- Power bank not charging:
- Ensure the power adapter is 5V2A and functioning correctly.
- Check the Micro USB or Type-C input cable for damage and secure connection.
- Percentage display not working:
- Some units may have a non-functional or decorative percentage display (sticker). Rely on the indicator lights for charging status.
- Power bank turns off with low-power devices:
- This power bank may not support continuous operation for very low-power devices (e.g., small LEDs) and might automatically shut off after a short period. Press the power button again to reactivate.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | 18650 Battery Power Bank Case |
| Brand Name | OPUYYM |
| Type | Battery Storage Box |
| Input | 5V2A (Micro USB, Type-C) |
| Output | 5V2A (Dual USB) |
| Compatible Battery Type | 18650 (flat head) |
| Number of Battery Cells | 3 sections |
| Material | ABS |
| Color | Black |
| Size | 24mm x 77mm x 88mm |
| Weight (empty case) | 55g |
| Package Includes | 1x 18650 Power Bank Case (Batteries not included) |
7. User Tips
- Lid Caution: Be extremely careful when closing the lid, as it is designed for a secure, one-time closure and may be difficult or impossible to reopen without damage.
- Low Current Charging: This power bank case is noted to work well even with low current devices (e.g., 0.1 amperes), which is beneficial for sensitive electronics.
- Low Power Device Auto-Off: If charging very low-power devices like small LED lights, the power bank might automatically turn off after about a minute. You may need to press the power button again to resume charging.
- Battery Selection: Using high-quality 18650 batteries with sufficient capacity will maximize the performance and lifespan of your DIY power bank.
8. Frequently Asked Questions (FAQ)
- Q: Does the power bank case come with batteries?
- A: No, batteries are not included. You need to purchase three 18650 flat-head batteries separately.
- Q: Can the Type-C port be used for output (charging devices)?
- A: Yes, the Type-C port supports dual functionality, meaning it can be used for both input (charging the power bank) and output (charging devices).
- Q: How do I open the lid after closing it?
- A: The case is designed for a secure, one-time closure. It is generally not recommended to attempt to open the lid after it has been sealed, as it may result in damage to the case. Ensure all batteries are correctly installed and tested before final closure.
9. Warranty and Support
For any issues or questions regarding your OPUYYM 3x18650 DIY Power Bank Case, please contact the seller or retailer from whom you purchased the product. Please provide your order details and a description of the issue for efficient support.