1. Introduction
Thank you for purchasing the Peocke CF920 Smart LCD Key. This manual provides detailed instructions for the installation, operation, and maintenance of your device. Please read it thoroughly to ensure proper use and to maximize the functionality of your smart key.
The CF920 Smart LCD Key is designed to upgrade your vehicle's key system, offering features such as a comfortable entry system, a full-color IPS TFT display with OGS touch screen, and remote control functions for locking, unlocking, and trunk access. It is compatible with most cars equipped with a one-button start function.
2. Important Safety Notices
- **Battery Safety:** The device contains a lithium battery. Ensure the operating environment temperature is below 50°C to prevent the risk of explosion.
- **Water Resistance:** The device has an IP55 waterproof rating, meaning it is resistant to most dust and water splashes under normal operation. Handle with care to prevent dust or water from entering the device, as this may cause damage or explosion.
- **Vehicle Safety:** Before leaving your vehicle, always ensure all doors are properly closed when using the smart key's functions.
3. Package Contents
Verify that all the following items are included in your package:
- CF920 LCD Key
- OBD Interface
- Charging Cable
- User Manual (Printed)
- Wiring Harness
- Packing Box
4. Installation Guide
The installation process involves modifying your original car key's PCB (Printed Circuit Board) and connecting it to the CF920 Smart LCD Key. This process requires careful soldering and attention to detail. If you are not comfortable with electronic modifications, professional installation is highly recommended.
Step 1: Prepare the Original Key PCB
- Carefully open your original car key and remove its PCB board.
- Identify the functions of each button on your original PCB (e.g., Lock, Unlock, Trunk).
Step 2: Solder the Wiring Harness
- Use the provided wiring harness. Solder each wire to the corresponding button contacts on your original PCB. Each pair of wires is related to a specific function.
- **Important:** If your original car key has four buttons, solder the wire marked in yellow color as the "multifunction" wire for the fourth button.
- **Note:** Solder the two wires for each switch at opposite angles on the two sides of the switch.
Step 3: Insert PCB into IC Socket
- Insert the modified original car key PCB into the IC socket of the CF920 Smart LCD Key.
- **Notice:** Ensure the red color wire is positioned on the right side when inserting the PCB.
Step 4: Connect OBD and Antenna
- Connect the antenna wire to the OBD interface.
- Insert the OBD interface into the OBD port located under your vehicle's steering wheel.
5. Operating Instructions
5.1. Introduction of Display Menu
- The icon on the top left of the display indicates the connection status with the OBD device in the car.
- The battery icon shows the current battery status of the smart key.
- Slide the screen right or left to navigate through different functions.
- Press the relevant icons on the screen to activate functions such as Lock, Unlock, Trunk, and other multi-functions.
5.2. Introduction of Auto Switch (Comfort Access)
- Press the icon on the display to access the comfort access function settings.
- Long press for 2 seconds to toggle the function On/Off.
- When set to On, the vehicle doors will automatically lock when the smart key is 3-5 meters away from the car and automatically unlock when the smart key is 0-2 meters close to the car.
5.3. Introduction of Auto Window
- For cars with an auto window feature that allows long-pressing to close windows: when this function is used, it will automatically lock the windows and fold the side mirrors.
5.4. Introduction of the Phone Function
- Click on the phone icon to input your user phone number. This feature is designed to help in case you lose your key, allowing anyone who finds it to contact you for its return.
6. Device Settings
- **Version Info:** Click "Version info" to check the device's software version.
- **Signal Adjustment:** Click "Signal" to adjust the remote distance for the comfort access function. This setting only works when the smart key is connected to the OBD.
- **Language Selection:** Long press "Language" to select your preferred language. After selecting, you need to press the On/Off button and wait for 5 seconds for the key to turn on. The system will then apply the new language. (Note: Language function is not available for all models).
7. User Tips
- **Installation Complexity:** The installation process involves delicate soldering of the original key's PCB. If you lack experience with fine electronics work, it is strongly recommended to seek professional assistance to avoid damaging your original key or the new device.
- **Car Compatibility:** The smart key is primarily designed for cars with a one-button start system. While many brands are compatible (Audi, BMW, Ford, Mazda, Toyota, KIA, etc.), specific model years and configurations may vary. Always verify compatibility with your vehicle's existing keyless entry and OBD system.
- **OBD Connection:** The OBD interface is crucial for advanced smart features like automatic locking/unlocking based on proximity. Without the OBD connected, the key will function primarily as a standard remote with manual button controls.
- **Logo Customization:** Some users have reported success in changing the car logo displayed on the screen using a specific mobile application (e.g., "car key_V1.6.4_23052222") after enabling BLE_OTA in the key's settings. However, Bluetooth connectivity for this feature can sometimes be unstable.
8. Troubleshooting (FAQ)
Q1: What kinds of cars is the smart LCD car key compatible with?
A1: This smart LCD car key is compatible with all cars that feature an Engine Start/Stop button. Buyers report successful use on various brands like Audi, BMW, Ford, Mazda, Toyota, and KIA when the vehicle has a one-button start system and compatible keyless entry.
Q2: Will this device compromise the safety of the cars?
A2: No, the smart LCD car key does not alter any original functions of the car. The communication between the key and the car remains the same, ensuring that the safety level is identical to that of your original key.
Q3: How long does the built-in battery last, and how can I open the door if the battery is empty?
A3: The smart key has a built-in rechargeable Li-ion battery, and the key's display shows the battery status. Please charge as needed. If the display turns off, the smart key will automatically enter a power-saving mode. In this mode, the physical buttons can still operate the car for up to 1 year.
Q4: Will the original key be affected after soldering?
A4: During assembly, you only need to remove the original PCB board and solder the wires to each button. If you decide not to use our key, you can remove all the wires and place the original PCB back into its original case without affecting its functionality.
Q5: What is the OBD interface for, and will the key work if the OBD is not inserted into the car connector?
A5: The OBD interface enables smart features like automatic locking and unlocking based on proximity. Without it, the key will still function as a standard remote with manual buttons, but the advanced comfort access features will not be available.
Q6: Can I lose remote start functionality?
A6: Many buyers report the key retains original remote functions like locking, unlocking, and trunk control after installation. Remote start capability depends on the car's existing features and proper OBD setup. If your original key had remote start, it should be retained if the PCB is correctly integrated.
9. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Peocke |
| Model Name | CF920 LCD Display Key |
| Material | LCD Screen Display Smart Key (Zinc alloy frame) |
| R/C Function | WITH |
| Customization | Yes |
| Origin | Mainland China |
| Other Part Number | Retrofit and upgrade LCD button screen |
| Manufacturer Part Number | Universal Retrofit LCD Screen for Audi Ford |
| Interchange Part Number | CF920 LCD Display Key |
| OEM NO. | Universal LCD button display remote control key |
Package Dimensions and Weight:
- Length: 17 cm
- Width: 12 cm
- Height: 5 cm
- Weight: 0.249 kg
10. Warranty and Support
For detailed warranty information, technical support, and additional documentation, please refer to the official user manual PDF provided by the manufacturer. You can access the PDF version of this manual for comprehensive details and support information.
For further assistance, please contact the seller or refer to the full User Manual (PDF).