1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your ISUDAR 10.1 inch Android 14 Car Radio, model T75X. Designed specifically for VW/Volkswagen Passat B8 models from 2015 to 2020, this unit offers advanced features including Wireless Carplay, Android Auto, GPS navigation, 4G network connectivity, WiFi 6, Bluetooth 5.4, a built-in DSP sound system, and a QLED display. Please read this manual thoroughly to ensure safe and optimal use of your new car radio.
2. Safety Precautions
- For any issues during installation or usage, please contact our after-sales support.
- It is recommended to install this product under professional guidance, as it involves electronic equipment and automotive accessories that may pose risks such as electric shock, injury, or other hazards if handled by untrained individuals.
- Ensure the power is disconnected when performing any installation.
- This product is designed for vehicles with a 12V DC power system only. Do not install it on vehicles with a different power supply, as it may damage the product or cause a fire due to over-voltage.
- Turn off the car and disconnect the positive battery terminal before installation. Insulate all wires properly after installation to prevent short circuits that can lead to product damage or fires.
- Avoid using the car audio system for an extended period after turning off the engine to prevent draining the battery.
- If the product gets exposed to water damage or foreign matter while driving, park the vehicle in a safe location, turn off the ignition switch (ACC OFF) immediately, and consult your dealer or customer service. Do not use the product in this condition, as it may result in fire, electric shock, or other failures.
- In case of smoke, strange noises, unusual odors, or any other abnormal signs during normal use, immediately turn off the power and consult your dealer or customer service. Do not use the product in this condition, as it may result in fire, electric shock, or other failures.
- Please place the product out of reach of children to avoid unnecessary harm.
- The manufacturer reserves the right to provide the final explanation.
3. Setup and Installation
3.1. Wiring Diagram
Refer to the diagram below for proper wiring connections. If your package includes a CANBUS box, connect the CANBUS port to the corresponding socket on the car radio.
Note: The Camera Input, WiFi, and Bluetooth Antenna Ports must be installed. Otherwise, WiFi and Bluetooth signal reception will be poor. If your car has a JBL or other amplifier system, you may need another power cord adapter or a more complicated wiring method. Please contact after-sales support for assistance.
3.2. Power Plug Definition
The table below defines the pinout for the power connector. Ensure correct connections to avoid damage.
| Pin | Function | Pin | Function |
|---|---|---|---|
| 1. GND | GND | 9. FR- | Front Right Speaker- |
| 2. B+ | Battery +12V | 10. RL- | Rear Left Speaker- |
| 3. ACC | ACC | 11. FR+ | Front Right Speaker+ |
| 4. ILL | Illumination | 12. RL+ | Rear Left Speaker+ |
| 5. BACK UP | Camera Back up | 13. FL- | Front Left Speaker- |
| 6. WHEEL1 | Steering Wheel Control 1 | 14. RR+ | Rear Right Speaker+ |
| 7. WHEEL 2 | Steering Wheel Control 2 | 15. FL+ | Front Left Speaker+ |
| 8. ANT+12V | Antenna Power | 16. RR- | Rear Right speaker- |
3.3. GPS Antenna Installation
The GPS Antenna is recommended to be installed on the dashboard or below the windshield for optimal signal reception.
3.4. Frame Installation Tip
Transfer the snap clip from the original frame to the new one. This step is only applicable if your vehicle requires it.
3.5. CANBUS Setup
Setting the correct CANBUS type allows the car radio to better integrate with the original vehicle information system. This step is only necessary if your car radio includes a CANBUS Box and requires setup. If not, you can skip this step entirely.
- Connect the device to Wi-Fi.
- Go to: Settings > Factory (Code: 123456) > Select models.
- Select: CanBox > Cars for > Models for > Config.
For example, if your CANBUS box shows the brand SS (Simple Soft) for a Jeep Renegade, then choose: 03: Simple Soft > 87: JEEP > 11: 16 Renegade > LowConfig.
4. Operation
4.1. General Interface and Navigation
The car radio features a user-friendly interface. You can swipe through pages to access various applications and settings. The main screen displays time, weather, and quick access icons for common functions like Phone, Maps, Messages, Music, and more.
Video demonstrating the general page display, personalized customization, button functions, video playback, and mute during reversing features of the T75X car radio.
4.2. Personalized Customization
You can personalize your car radio experience by changing themes, wallpapers, and car logos.
- Online Theme: Access the 'Online theme' option to browse and apply various themes.
- Car Logo: In settings, you can choose a car logo to be displayed on the screen.
4.3. Button Functions and Touch Button Settings
The device supports customizable button functions and touch button settings. You can assign specific actions to physical and touch buttons on the unit.
- Button Functions: Navigate to settings to configure the actions for physical buttons.
- Touch Button Settings: Access settings to customize the functions of the touch buttons on the screen.
4.4. Media Playback
The car radio supports various media formats for music and video playback. You can play music from local storage or streaming apps. Video playback is also supported, with options for floating video and brake settings.
4.5. Mute During Reversing
For safety, the audio can be muted automatically when the vehicle is in reverse. This feature can be configured in the settings.
4.6. Wireless Carplay & Android Auto & Mirror Link
The unit supports both wireless and wired Carplay and Android Auto, allowing seamless integration with your smartphone. You can also mirror your phone's screen to the car radio.
- Wired Connection: Turn off WiFi and Bluetooth on your phone. Use a 4-pin USB cable to connect.
- Wireless Connection: Turn on WiFi and Bluetooth on your iPhone/Android. Find the stereo's Bluetooth (e.g., CarKit_blink, PIN: 0000) and connect. Allow contacts and favorites sync. Use CarPlay/Android Auto with "ZLINK".
- Mirror Link: For iPhone AirPlay, tap the iPhone icon on the car radio to activate hotspot mode, then connect your iPhone's personal hotspot. On your iPhone, open Control Center, tap Screen Mirroring, and select "zj-airplay". For Android Link, tap the Android icon, scan the QR code to download the app, connect your phone's Bluetooth, turn off WiFi, enable mobile hotspot, and then tap Start Screen Mirroring.
4.7. GPS Navigation
The unit includes a GPS antenna and supports both GPS and GLONASS systems. You can use online and offline navigation apps like Google Maps, Yandex, and Waze.
4.8. Split Screen & Picture-in-Picture (PIP)
The split-screen function allows you to divide the screen into two parts, enabling simultaneous viewing of navigation and music. Video content can also be displayed in Picture-in-Picture mode.
4.9. 4G Network & WiFi 6
The T75X model supports 4G network connectivity via a SIM card slot and antenna, providing a stable and fast internet connection. It also features WiFi 6 for faster transmission speeds (up to 9.6 Gbps).
4.10. Bluetooth 5.4 Handfree
Built-in Bluetooth 5.4 ensures a more stable connection, longer distance, and higher transmission efficiency. It supports mobile phone hands-free calling, music streaming, phonebook access, and automatic connection after the initial pairing.
4.11. Radio
Equipped with an ST7708 Radio receiver chip, the unit offers excellent radio reception and anti-interference performance, with FM/AM/RDS functions.
4.12. CANBUS Features
The CANBUS module enables support for steering wheel controls, car information display, air-conditioner status, and original parking sensor display. (Note: If the original radio cannot display car information, this unit will also not be able to display it).
4.13. Online Voice Control
The unit features online professional version voice control with an AI assistant, allowing for hands-free operation and safer driving. It supports online voice commands such as "Go to Airport" or "Play Beat It on Spotify". An activated code may be required for this feature.
4.14. Built-in DSP Sound System
The built-in Digital Sound Processor (DSP) allows for advanced audio customization:
- 32-band EQ setting: Customize your desired music style.
- Sound field adjustment: Adjust surround sound for an immersive audio experience.
- Subwoofer output adjustment: Enhance music rhythm and reduce driving fatigue.
4.15. QLED Display
The 10.1-inch QLED screen boasts a resolution of 1280*720P, offering higher pixels and a clearer display. This results in clearer, more delicate display quality with vivid and rich colors, providing a wonderful visual feast.
4.16. USB DVR Input
The unit supports ADAS USB 1080P DVR input. When connected, the screen will display the distance of obstacles and provide alarms. Note that the DVR is not included with the car radio.
4.17. Rear Camera Support
The car radio supports various rear cameras, including 1080p & 720p AHD/RCA rear view cameras with parking lines.
5. Maintenance
To ensure the longevity and optimal performance of your ISUDAR car radio, follow these general maintenance guidelines:
- Regularly clean the screen with a soft, lint-free cloth. Avoid abrasive cleaners.
- Keep the unit free from dust and debris.
- Avoid exposing the unit to extreme temperatures or direct sunlight for prolonged periods.
- Ensure all connections are secure and free from corrosion.
- If the unit requires cleaning of internal components, consult a professional technician.
6. Troubleshooting (FAQ)
Q: Why are my steering wheel controls and rear-view camera functions not working properly?
A: You may need to reconfigure the Canbus type. Please contact our after-sales support to receive guidance on the specific Canbus settings for your vehicle model.
Q: Black screen / can't power on.
A: 1. Press the RST button on the car stereo. This button is typically used to reset the system and may help resolve any temporary issues.
2. Check if the car stereo is receiving a stable DC12V voltage. Ensure that the power source is providing the correct voltage to the stereo.
3. Inspect the car stereo fuse to see if it is burnt out. If the fuse is blown, replace it with a new one of the same rating.
4. Reconnect the BATT+/ACC/GND wires of the car stereo to the corresponding BATT + / ACC/GND wires of the original car wiring. Ensure the connections are secure and properly aligned.
Q: My car has an amplifier system. Why is there no sound after installation?
A: 1. Please ensure that the power cable we provided is compatible with your car. If it's not, contact our after-sales support for a compatible power cable.
2. Please connect the AUX cable of the power cable to the AUX cable of the RCA cable. (AUX-L-IN = AUDIO OUT L; AUX-R-IN = AUDIO OUT R; AUX L = AUX IN L; AUX R = AUX IN R).
3. Make sure the power cable we provided includes a separate blue AMP Control wire, which should be connected to the blue "AMP CONT" wire on the RCA harness.
4. Turn on the amplifier switch in the settings: The amplifier and fan share a power supply. Therefore, please enable "Always on" in the Fan app.
Q: Why can't I play videos while driving?
A: For safe driving, video playback is disabled. You need to set it to open as follows: Settings > Factory (Code:8888) > Brake setting > Close.
Q: Why does the music stop when reversing?
A: For safety reasons, you need to turn it on as follows: Settings > Reverse > Reversing volume control, and adjust the volume to your desired level.
Q: How to set up automatic connection to CarPlay after Bluetooth connection?
A: Follow these settings: Settings > General > Application self start > Tlink5.
Q: How to change between Celsius and Fahrenheit units?
A: First, connect your car stereo to your phone's hotspot or WiFi. Then, open the weather app. Click the gear icon in the top right corner and select your preferred temperature unit. To switch the air conditioning temperature unit: Settings > Original > TEMP norm > Fahrenheit/Centigrade > confirm.
Q: How to change the speed unit?
A: Please follow the path below to modify the settings: Click the "Theme" APP icon > Click the gear icon in the upper right corner > Plugin > Speed unit.
Q: Why is the time or time zone not updating automatically?
A: Follow this path to set it: Settings > System > Date & Time, connect your car stereo to your phone's hotspot or WiFi and then open the "Set time automatically".
Q: Why is my weather information and location not updated?
A: You need to connect the car stereo to your mobile phone hotspot or WiFi, and the weather information and location will be updated online.
Q: The touch screen is not sensitive or the touch position is wrong.
A: Find a wired mouse and connect it to the USB port, then use the mouse cursor to click the following path to enter the settings: Settings > Factory (Code:123456) > Touch area key > POSITION. Then select "CALIBRATION", last you need to click the screen position with your finger instead of clicking the mouse.
Q: How to use the picture-in-picture function?
A: Settings > General > Video suspension window > ON.
Q: If I don't have a factory-installed rearview camera and don't want the reversing image to be displayed when reversing, how do I turn it off?
A: Settings > Factory (Code: 123456) > Reverse Mode > Prohibit reversing.
Q: How to change the language?
A: Settings > More > System > Languages > System Languages.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | ISUDAR |
| Din | Double Din |
| Display Size | 10" |
| Resolution | 1280*720P |
| Operating System | Android 12 (T75X model is Android 14) |
| RAM | 8G |
| ROM | 128G |
| Out Power | 4*47W |
| Voltage | 12 V |
| Max External Memory | 128G |
| Special Features | Built-In Speaker/Microphone, WiFi function, Support 3G/4G Network, Support Can-Bus, Built-in GPS, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Remote Controller Included, Support steering wheel control |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| OSD Language | Multi-language support (Simplified Chinese, Traditional Chinese, Albanian, Arabic, Azeri, Irish, Estonian, Belarusian, Bulgarian, Icelandic, Polish, Persian, Danish, German, Russian, French, Filipino, Finnish, Georgian, Haitian Creole, Korean, Dutch, Galician, Catalan, Czech, Croatian, Latin, Latvian, Lithuanian, Romanian, Maltese, Malay, Macedonian, Norwegian, Portuguese, Japanese, Swedish, Serbian, Slovak, Slovenian, Swahili, Thai, Turkish, Welsh, Ukrainian, Hebrew, Greek, Spanish, Hungarian, Armenian, Italian, Yiddish, Hindi, Urdu India, Indonesian, English, Vietnamese) |
| For Vehicle Brands/Model | Volkswagen Passat |
| Certification | CE |
| Network Radio | Support |
| On-line Weather | Support |
| On-line Theme | Optional |
| Carplay & Android Auto | Support |
For a detailed comparison of models (LX5A, T10C, T58M, T58B, Q74X, T75X), refer to the table below:
8. User Tips
- The T75X model operates on Android 14 with 8GB RAM and 128GB ROM, offering robust performance for various applications.
- Ensure your phone supports Google services for wireless Android Auto functionality.
- If you experience issues with steering wheel controls, verify your CANBUS settings or contact support for specific guidance.
- For optimal sound with an amplifier, ensure the blue 'AMP CONT' wire is correctly connected and the amplifier switch is enabled in the settings.
9. Warranty and Support
9.1. Warranty
This product comes with a 12-month warranty. The valid replacement period is 14 days from the date of receipt of the goods. Shipping costs for replacement are covered if the device is not as described.
9.2. After-Sales Support
For any questions or issues, please feel free to contact us. We are committed to helping you solve any problems you encounter.
Email: xyl-supports@aliyun.com
Business Information:
- Importer: GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA
- Importer Address: CASTELLANA 9144, 28046 Madrid
- Manufacturer: Shenzhenshi Xinyingli Technology CO., Ltd.
- Manufacturer Address: Room 402, Building A5, Third Industrial Zone, Huaide Community, Fuyong Street, Baoan District, 518103, Shenzhen, China
Any question can be resolved. Please feel free to contact our after-sales support.