1. Introduction
Thank you for choosing the Mecool KM2 Plus Smart TV Box. This device transforms your television into a smart entertainment hub, offering access to a wide range of streaming services, apps, and media playback options. This manual provides essential information for setting up, operating, and troubleshooting your device to ensure a seamless user experience.
For a comprehensive guide, you may also refer to the official user manual PDF: Mecool KM2 Plus User Manual (PDF).
Mecool KM2 Plus Smart TV Box with remote, showcasing supported streaming services and features like Netflix, 4K HDR, YouTube, Prime Video, Dolby Audio, Chromecast built-in, Google Play, and Disney+.
2. Warning & Safety Information
Important Safety Information
- DO NOT open the device casing. There are no user-serviceable parts inside; all repairs must be performed by qualified personnel. Unauthorized opening may void the warranty and cause safety hazards.
- Do not expose the set-top box (STB) or power adapter to rain, moisture, humidity, or extreme temperatures. The recommended operating temperature range is 0°C-40°C; storage temperature range is -20°C-60°C.
- Use only the provided power adapter with the following specifications: [Input: 100-240V~50/60Hz; Output: DC 12V/2A]. Using unapproved, damaged, or mismatched power adapters may cause fire, electric shock, or permanent damage to the device.
- Keep the device away from heat sources (e.g., radiators, stoves, candles) and ensure adequate ventilation (maintain a 10cm gap around the device) to prevent overheating.
- Disconnect the power supply from the wall outlet before cleaning the device. Wipe the surface with a dry, soft, lint-free cloth; do not use liquid cleaners, aerosol cleaners, or abrasive materials, as they may damage the device.
- Adult supervision is required during setup and use if children are present. Small parts (e.g., remote control batteries) pose a choking hazard—keep them out of reach of children under 36 months old. If a battery is swallowed, seek medical attention immediately.
- Stop using the device immediately if you notice smoke, strange odors, abnormal noises, or overheating. Disconnect the power adapter and contact the EU Authorized Representative or customer support for assistance.
- Do not place heavy objects on the device or its cables, and avoid pulling, bending, or damaging the power cable and HDMI cable to prevent short circuits.
- This product is intended for indoor use only; do not use it outdoors or in damp environments (e.g., bathrooms, kitchens).
3. Package Contents
Please check the package contents upon unboxing. If any items are missing or damaged, contact customer support.
- Mecool KM2 Plus Smart TV Box
- Remote Control
- Power Adapter (DC 12V/2A)
- HDMI Cable
- User Manual
- AAA Batteries (for remote, may be included or sold separately depending on region)
Contents of the Mecool KM2 Plus package.
4. Device Overview
4.1 Front Panel
- Power Indicator (LED): Lights up blue when the device is powered on; blinks blue during boot-up; turns red in standby mode.
- IR Sensor: Receives signal from the remote control; ensure there are no obstacles between the remote and the sensor for normal operation.
4.2 Rear Panel
- HDMI OUT: Connect to the HDMI input port of your TV or monitor to transmit video and audio signals.
- LAN (RJ45): Connect to a router using an Ethernet cable for a stable wired internet connection (supports 10/100/1000Mbps).
- USB 2.0/3.0 Port: Connect USB flash drives, external hard drives, or other USB devices to play local media (videos, music, photos).
- DC IN: Connect the provided power adapter to supply power to the device (input voltage: DC 12V).
- AV OUT (Optional): For analog TV connections (connect to TV's AV input port using an AV cable, not included).
Mecool KM2 Plus device and its remote control.
5. Quick Setup Guide
Follow these steps to set up your set-top box quickly. Ensure all connections are secure before powering on the device.
5.1 Hardware Connection
- Open the battery compartment of the remote control, insert 2 AAA batteries, and ensure the positive (+) and negative (-) polarities match the markings inside the compartment. Close the battery compartment securely.
- Connect one end of the HDMI cable to the HDMI OUT port on the STB and the other end to the HDMI IN port on your TV/monitor.
- (Optional) Connect one end of an Ethernet cable to the LAN port on the STB and the other end to your router for a wired internet connection. If using Wi-Fi, skip this step and configure it later in the setup wizard.
- Connect the power adapter to the DC IN port on the STB, then plug the other end of the adapter into a grounded wall outlet.
- Power on the STB by pressing the Power button on the device or the remote control. Power on your TV and switch its input source to the HDMI port connected to the STB (e.g., HDMI 1, HDMI 2) using the TV's remote control.
Mecool KM2 Plus device with its accessories, ready for connection.
5.2 Initial Configuration (Setup Wizard)
- The STB will boot up automatically and display the setup wizard on your TV screen. Follow the on-screen prompts to complete the initial configuration.
- Language Selection: Choose your preferred language (English, German, French, Spanish, Italian, etc.—EU languages are supported) from the dropdown menu.
- Internet Connection:
- If using wired internet: The device will connect automatically (DHCP enabled by default).
- If using Wi-Fi: Select your Wi-Fi network from the list of available networks, enter the Wi-Fi password (case-sensitive), and tap "Connect" to establish the connection.
- System Update: If a firmware update is available, the device will prompt you to download and install it. Click "Update Now" and do not power off the device during the update (this may take 2-5 minutes).
- Remote Control Pairing (If Applicable): If your remote control supports Bluetooth pairing, follow the on-screen instructions to pair it with the STB (for IR remotes, no pairing is required).
- Complete Setup: After configuring all settings, the STB will redirect you to the main menu. You can now start using the device.
6. Basic Operation
6.1 Remote Control Buttons & Functions
| Button | Function |
|---|---|
| Power | Turn the STB on or off (enters standby mode when turned off). |
| Home | Return to the main menu from any screen. |
| Back | Go back to the previous screen or exit the current menu. |
| Navigation (↑↓←→) + OK | Use the navigation buttons to select options; press OK to confirm your selection. |
| Volume +/- / Mute | Adjust the TV volume; press Mute to turn off audio temporarily. |
| Number Keys (0-9) | Directly input channel numbers (for live TV apps that support channel number input). |
| Menu | Access the device's settings menu and advanced options. |
| Play/Pause / Stop | Control media playback (for local media or VOD content). |
Remote control with Google Assistant button for voice commands.
6.2 Main Functions
- Live TV: Open the pre-installed live TV app to stream live channels (internet connection required).
- Video-on-Demand (VOD): Watch movies, TV shows, and other on-demand content through VOD apps.
- Media Player: Open the Media Player app to play local media files (MP4, MKV, MP3, JPG, etc.) from USB devices connected to the USB port.
- Settings: Adjust network, display, audio, and system preferences (see Section 7 for details).
Android TV interface for smart entertainment.
7. Advanced Settings
Access the advanced settings by pressing the "Menu" button on the remote control and selecting "Settings" from the main menu.
7.1 Network Settings
- Wi-Fi: View available Wi-Fi networks, connect to a new network, forget a saved network, or adjust Wi-Fi signal strength.
- Wired (LAN): Configure IP settings (DHCP by default; static IP can be set manually if needed).
- Network Status: Check internet connection status, IP address, subnet mask, gateway, and DNS server.
7.2 Display Settings
- Resolution: Select the appropriate resolution (1080p@60fps, 4K@60fps, etc.) based on your TV's capabilities. We recommend selecting "Auto" for automatic resolution matching.
- Screen Size: Adjust the screen size to fix overscan or underscan issues (if the image is cut off on the edges of the TV).
- HDR Mode: Enable or disable HDR (High Dynamic Range) for better image quality (supported TVs only).
7.3 Audio Settings
- Audio Output: Select the audio output mode (HDMI, AV, or Optical, if applicable).
- Audio Language: Select the default audio track language for supported content (if multiple languages are available).
- Volume Control: Adjust the device's volume level (independent of TV volume).
7.4 System Settings
- System Update: Check for and install the latest firmware updates manually (automatic updates are enabled by default).
- Factory Reset: Erase all user data (apps, settings, passwords) and restore the device to its factory defaults. Note: Back up important data before performing a factory reset.
- About Device: View device model, serial number, firmware version, MAC address, and other device information.
- Sleep Mode: Set the device to enter standby mode automatically after a period of inactivity (5 minutes, 10 minutes, 30 minutes, or never).
8. Troubleshooting Common Issues
If you encounter problems while using the set-top box, refer to the following troubleshooting guide before contacting customer support. Most issues can be resolved quickly with simple steps.
| Issue | Troubleshooting Steps |
|---|---|
| No power, LED indicator not lit |
|
| No picture on TV |
|
| No sound |
|
| Remote control not working |
|
| Wi-Fi connection issues (slow/unstable) |
|
| Slow device performance, apps crashing |
|
| USB device not recognized |
|
9. Specifications
| Feature | Specification |
|---|---|
| Brand Name | DooerTak |
| Model | KM2 PLUS |
| Category | Set Top Box |
| OS | Android 10.0 |
| CPU | Amlogic S905X4 Quad-core 64-bit |
| GPU | Mail-G31 MP2 |
| Memory | 2 GB DDR4 |
| Internal Storage | 16GB eMMC |
| Max. Extended Capacity | TF Card Up To 32GB |
| Max Output | 4K @ 60 Hz |
| HDR Standards | HDR10+, HLG, HDR10 |
| Video Output | HDMI-Compatible 2.0 |
| USB Ports | 1x USB 2.0, 1x USB 3.0 |
| Ethernet | 100M |
| Wireless | Yes |
| Bluetooth | Yes |
| GOOGLE Cast | Yes |
| System Upgrade | Yes |
| OTA Update | Yes |
| Power Source | DC |
| Power (W) | DC 12V, 1.5A |
| Voltage range | Low voltage non-USB (below 75V DC, below 50V AC) |
| Inbox adaptor | Yes |
| Remote Control | Included |
| Supported Internet Services | Prime video, NETFLIX, YouTube |
| Weight | 0.4kg |
| Certification | CE |
| Origin | Mainland China |
10. User Tips
- Smooth Performance: Users report the device operates smoothly and handles 4K signals effectively, providing a good Android smart TV experience.
- App Flexibility: The KM2 Plus supports downloading a wide range of applications from the Google Play Store, allowing for easy installation of apps beyond the preloaded ones.
- Language Support: The device supports multiple languages, including Hebrew, with menus and interfaces fully functional, enhancing usability for diverse users.
- Media Playback: It handles a wide range of video formats smoothly, including 4K content, with strong codec support and no playback issues in common apps.
- Plug Type: Ensure you select the correct plug type (e.g., US, EU, UK) when purchasing to match your region's electrical outlets.
11. Warranty and Support
The Mecool KM2 Plus Smart TV Box comes with a standard manufacturer's warranty. For specific warranty terms, duration, and support, please refer to the documentation included in your package or contact the seller directly. In case of technical issues or questions not covered in this manual, please reach out to the manufacturer's customer support or the authorized representative.
Manufacturer: Shenzhen Oder Technology Co.ltd, 4D006, Building 1, No. 314 Pingji Avenue, Hehua Community, Pinghu Street, Longgang District, Shenzhen City, Guangdong Province.
EU Authorized Representative: Apex CE Specialists GmbH, Grafenberger Allee 277, 40237 Düsseldorf, DE Duesseldorf Nordrhein-Westfalen. Email: Info@apex-ce.com
12. Compliance Information
This device complies with relevant European Union directives and regulations. The CE mark indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
CE