Liludin YDH-01

Contents

Digital Touch Button Sensor Capacitive Switch Modules User Manual

Model: YDH-01

Brand: Liludin

1. Product Overview

This is a high-quality electronic component module, designed for DIY electronic projects, industrial control equipment, portable devices, and precision electronic products. It features small size, stable performance, easy installation, and low power consumption. It can realize corresponding functions (power supply, touch control, boost conversion, etc.) efficiently and safely.

Assortment of Liludin Digital Touch Button Sensor Capacitive Switch Modules.
Assortment of Liludin Digital Touch Button Sensor Capacitive Switch Modules, including TTP223, TTP224, and MPR121 types.

2. Safety Warnings

  • Professional operation is recommended; avoid touching circuit pins or interfaces during operation to prevent electric shock or module damage.
  • Ensure input voltage/current matches the module's rated parameters; do not overload or exceed the maximum rated value.
  • Keep away from water, moisture, high temperature, flammable materials, and strong electromagnetic interference sources.
  • Do not disassemble, modify, or repair the module without permission; disconnect all power supplies before wiring or maintenance.
  • Avoid short circuit of pins or interfaces; reverse connection of positive and negative poles may cause burnout or fire hazard.
  • For battery-related modules: Use only compatible battery types (e.g., Li-ion), avoid explosion or leakage.

3. Setup

3.1. Pin & Interface Definition

The following table provides a general definition for the pins and interfaces. Please refer to the specific product variant for exact details.

Interface/Pin Label Function (Modify Based on Product)
Pin/Interface 1 [e.g., VCC/AC IN (L)] [e.g., Power Supply Positive / AC Live Wire]
Pin/Interface 2 [e.g., GND/AC IN (N)] [e.g., Power Supply Negative / AC Neutral Wire]
Pin/Interface 3 [e.g., OUT/BAT+] [e.g., Signal/Output Positive / Battery Positive]
Pin/Interface 4 [e.g., NC/BAT-] [e.g., No Function / Battery Negative]
Close-up of a TTP223 capacitive touch sensor module with dimensions and pin labels.
Example TTP223 module showing pin labels (VCC, GND, I/O) and dimensions (23.8mm x 24.2mm).

3.2. Installation & Wiring

Follow the steps below for safe installation and wiring (professional operation recommended):

  1. Disconnect all power supplies before wiring to avoid electric shock or module damage.
  2. Connect the power supply, load, or battery to the corresponding pins/interfaces according to the pin definition (avoid reverse connection).
  3. Check wiring carefully to ensure no short circuit, reverse connection, or loose contact.
  4. After confirming the wiring is correct, connect the power supply; the module will work normally.

4. Operation

  • Do not exceed the module's rated parameters (voltage, current, power) during use to avoid damage.
  • Keep the module in a well-ventilated environment; slight heating during operation is normal (if overheated, disconnect power immediately).
  • According to the module function, use it in the corresponding scenario (e.g., power module for power supply, touch module for touch control).

5. Maintenance

  • Regularly inspect wiring for any signs of wear, damage, or loose connections.
  • Keep the module clean and free from dust and debris to ensure optimal performance.
  • Ensure the operating environment remains within specified temperature and humidity ranges.
  • If the module stops working, disconnect power first, check wiring and parameters, then restart after troubleshooting.
  • Turn off the power before disassembling, maintaining, or replacing the module.

6. Troubleshooting (General)

  • No function/output: Check power supply, wiring connection, pin definition, and input parameters.
  • Unstable performance: Ensure input voltage is stable, avoid overload, poor contact, and electromagnetic interference.
  • Module overheating: Reduce load, improve ventilation, or check for short circuit.
  • Abnormal noise/indicator: Keep away from interference sources, check wiring tightness, and module damage.

7. Specifications

Attribute Value
Product Name Electronic Components Module
Model YDH-01
Brand Name Liludin
Type Switch
Switch Type Touch On/Off Switch
Origin Mainland China
Condition New
Certification CE Certified | RoHS Compliant (EN 60335-1, EN 55014-1)
Package Dimensions (approx.) 5cm x 5cm x 5cm
Package Weight (approx.) 0.01 kg
MPR121 capacitive touch sensor module. TTP223 capacitive touch sensor module (orange variant).
Various capacitive touch sensor modules, including MPR121 and TTP223 variants.

8. User Tips

  • These modules offer sensitive and reliable touch response, making them ideal for various DIY and interactive projects.
  • They are generally easy to connect and configure, suitable for use with microcontrollers like Arduino.
  • When testing multiple channels, ensure proper isolation to prevent false triggers.
  • Consider the specific requirements of your project (e.g., voltage, number of channels) when selecting the appropriate module variant (TTP223, TTP224, MPR121, etc.).

9. Warranty & Support

Warranty: 12 months (manufacturing defects only, excluding man-made damage, overload, improper use, or operation errors).

Manufacturer Contact:

  • Company: Shenzhen Yuedonghong Technology Co., Ltd
  • Address: 2C056B, Zhonghang Road Metropolitan Electronic City, Huaqiangbei Street, Futian District, Shenzhen, Shenzhen Guangdong Province, China, Postcode: 518000
  • Tel: 86-13147003747
  • Email: jiaweinuokeji@163.com

EU Authorized Representative (Compliance Responsible Person) Contact:

  • Company: APEX CE SPECIALISTS LIMITED
  • Country: Ireland
  • Address: UNIT 3D NORTH POINT HOUSE NORTH POINT BUSINESS PARK NEW MALLOW ROAD CORK T23 AT2P, IRELAND
  • Tel: 353-2066339
  • Email: INFO@APEX-CE.COM

For a complete version of the user manual, please refer to the official PDF document: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.