1. Product Overview
This CCXTMT motorcycle modification part is a right brake master cylinder pump and lever assembly, designed as a direct replacement and upgrade for original factory components. Manufactured by CCXTMT, a professional producer of motorcycle accessories, this part aims to enhance braking performance, riding comfort, and overall vehicle aesthetics. It is precision-manufactured from high-strength, wear-resistant aluminum alloy, ensuring superior adaptability, stability, and safety for various riding conditions, including daily commuting and light competition.

2. Specifications
The following table details the key specifications for the CCXTMT Right Brake Master Cylinder Pump Brake Lever:
| Feature | Detail |
|---|---|
| Condition | 100% Brand New |
| Material | Aluminum Alloy |
| Installation Handlebar Diameter | 7/8" (22mm) |
| Piston Diameter | 11.5 mm |
| Weight | 355g |
| Installation Location | Right Side |
| Color | Silver (as shown in product images) |
| Overall Length | 146mm |
| Overall Height | 90mm |
| Banjo Bolt Thread | M10 |
| Material Standard | Complies with motor vehicle component safety standards; superior strength, temperature, and corrosion resistance. |

2.1. Fitment Compatibility
This brake master cylinder and lever is compatible with various motorcycle models. Please verify the size and specifications against your motorcycle before installation.
- For KTM: 125-530 SX/SX-F/XC/XC-F/XC-W/XCF-W/EXC/EXC-F TPI 6Days (2008-2023)
- For Husqvarna: 125-501 TE/FE/TC/FC/TX/FX
- For Gas Gas: 250/300 EC/EX/MC
3. Package Contents
The package includes all necessary components for installation:
- Right Brake Master Cylinder Assembly
- Brake Lever
- Reservoir Cap and Diaphragm
- Mounting Bolts and Washers
- Banjo Bolt and Washers
- Small Screws for Reservoir Cap

4. Setup and Installation
Proper installation is crucial for safety and performance. If you are not confident in performing the installation yourself, it is highly recommended to seek assistance from a professional motorcycle mechanic.
- Pre-Installation Check: Before beginning, carefully check that the CCXTMT part model is compatible with your motorcycle. Inspect the part for any damage or deformation, and ensure all accompanying accessories (bolts, gaskets, etc.) are complete.
- Professional Installation Recommended: Installation should ideally be performed by personnel with motorcycle maintenance experience or at a professional repair shop. Follow your motorcycle's original factory part disassembly specifications to remove old components, preventing damage to the vehicle or new parts.
- Tools and Torque: Use appropriately sized sockets, wrenches, and other tools. Ensure that all bolts are tightened to the manufacturer's specified torque values (refer to your motorcycle's service manual for general torque specifications, as specific values for this part are not provided). Over-tightening or under-tightening can lead to part damage or failure. The connection strength must meet or exceed original factory standards.
- Brake Fluid and Bleeding: After installing the new brake master cylinder, fill the reservoir with the recommended brake fluid (typically DOT 4 or DOT 5.1, as indicated on the reservoir cap). Repeatedly step on or pump the brake pedal/lever to bleed air from the brake pipeline until the lever feels firm and consistent.
- Functionality Test: Check that the brake sensitivity and braking force are normal and meet or exceed the original factory braking effect. Confirm there are no fluid leaks around the master cylinder, lines, or calipers before riding.
- Final Inspection: After installation, thoroughly inspect all connection points for tightness. Check for any interference between the new brake component and other vehicle parts. Ensure there are no potential safety hazards and that all other vehicle systems function normally.


5. Operating Instructions
The CCXTMT Right Brake Master Cylinder Pump and Lever functions identically to your original equipment, providing hydraulic pressure to your front brake caliper. Its design aims to enhance braking performance and feel.
- Brake Application: Squeeze the brake lever towards the handlebar to actuate the front brake. The amount of pressure applied to the lever directly correlates to the braking force.
- Brake Fluid: Ensure the brake fluid level in the reservoir is always between the MIN and MAX marks. Use only the type of brake fluid specified on the reservoir cap (e.g., DOT 4 or DOT 5.1).
- Performance Enhancement: This high-performance braking component is designed to enhance brake friction, potentially shortening braking distance (by 10%-15% compared to original factory parts), improving brake response speed, and providing continuous braking stability.
- Lever Adjustment: The brake lever may feature an adjustment screw (as shown in Figure 6) to fine-tune the lever's reach to suit rider preference and hand size. Adjust this only when the motorcycle is stationary.

6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your brake system.
- Break-in Period: After installation, conduct a 500km break-in ride. During this period, avoid aggressive driving behaviors such as sudden acceleration, sudden braking, and prolonged high-speed riding to allow the new components to fully adapt.
- Environmental Care: During daily riding, avoid driving through deep water or muddy roads to prevent water ingress, debris contamination, corrosion, or malfunction. Avoid collisions or scratches to keep the part intact.
- Regular Inspections: Regularly inspect all connection points of the brake master cylinder. Tighten any loose bolts promptly. Check for any signs of fluid leakage around the master cylinder, brake lines, or calipers.
- Brake Pad and Disc Wear: Regularly inspect the wear of your brake pads and brake discs. Replace brake pads promptly when their thickness is less than 3mm, or if the brake disc shows severe scratches or deformation.
- Brake Fluid Level and Quality: Periodically check the brake fluid level and condition. Replace brake fluid according to your motorcycle manufacturer's recommendations, typically every 1-2 years, or if it appears discolored or contaminated.
- Cleaning: Keep the brake master cylinder clean. Avoid using high-pressure water directly on connection points and seals. Do not use corrosive cleaning agents; clean with mild soap and water, then rinse thoroughly.
7. Troubleshooting
If you encounter any issues with your CCXTMT brake master cylinder, follow these guidelines:
- Abnormal Noise or Feel: If you notice any unusual noises, a spongy lever feel, or excessive lever travel, stop riding immediately.
- Fluid Leakage: Any visible brake fluid leakage is a critical safety concern. Stop riding immediately.
- Performance Degradation: If braking performance feels diminished or inconsistent, or if the part fails to meet the expected effect, stop riding immediately.
- Inspection and Resolution: In any of the above situations, safely pull over, inspect the brake system thoroughly, and identify the cause of the fault. Do not continue riding until the issue is resolved by a qualified mechanic.
8. User Tips
- Always use the correct type of brake fluid as specified on your master cylinder reservoir cap and in your motorcycle's owner's manual. Mixing different types of brake fluid can cause damage to the brake system.
- When bleeding brakes, ensure the master cylinder reservoir does not run dry to prevent air from re-entering the system.
- Regularly check your brake pads for wear. Worn pads can lead to reduced braking performance and damage to brake discs.
9. Warranty and Support
CCXTMT modification parts come with an independent warranty. Replacement of original factory parts with CCXTMT components does not affect your original vehicle's basic warranty.
- Quality Issues: If you experience any quality issues with your CCXTMT modification part, do not attempt to disassemble or repair it yourself.
- Contact Support: Contact the purchasing merchant or CCXTMT after-sales service directly. Provide your purchase certificate to avail of the brand's independent warranty service. Refer to your product warranty card for specific warranty periods and terms.
10. Safety Warnings
Please read and adhere to the following safety warnings to prevent accidents and ensure safe operation:
- Legal Compliance: This CCXTMT modification part is intended for legal and compliant replacement of corresponding original factory motorcycle parts. All modifications must comply with local traffic regulations and not exceed legally permitted scopes. Non-compliance may result in penalties and affect vehicle inspections.
- Adaptation Period: After replacing original factory parts, your vehicle's performance, handling, and comfort may change. Riders must gradually adapt to these changes to avoid safety accidents. Drunk driving, speeding, and other dangerous behaviors are strictly prohibited.
- No Unauthorized Modification: Do not arbitrarily modify or disassemble CCXTMT modification parts a second time. Doing so may cause part damage, performance failure, potential safety hazards, and void the brand warranty.
- Immediate Stop on Abnormality: If any abnormality is found in CCXTMT modification parts during use (e.g., abnormal noise, fluid leakage, performance degradation, or failure to meet expected effects), immediately stop riding. Inspect and eliminate the fault cause before continuing to use the motorcycle.