1. Product Overview
The DY-11 Touch Sensor Switch is designed to provide convenient touch control for various lighting fixtures, particularly those with metal bodies. It features a multi-stage dimming function and is suitable for incandescent and halogen bulbs within specified power limits. This device integrates a surge absorber for electrical safety and to prevent external interference.
This manual provides essential information for the safe and effective installation, operation, and maintenance of your touch sensor switch.
2. Specifications
| Parameter | Detail |
| Model | DY-11 |
| Theory | Inductance Sensor |
| Output | Switching Transducer |
| Use | Touch Sensor Switch |
| Material | PVC |
| Color | Black |
| Working Voltage | AC 220-240V, 50/60Hz |
| Load Power | 15-85W (max) |
| Compatible Load Types | Ordinary incandescent lamps, ordinary halogen lamp beads (suitable for ordinary bulbs and low power bulbs). Not compatible with LED or energy-saving bulbs. |
| Dimensions (L x W x H) | 45mm x 35mm x 15mm |
| Line Length | 85mm |
Dimensions Diagram:

Image: Dimensions of the DY-11 Touch Sensor Switch.
3. Setup and Wiring
Safety Warning: Ensure the main power supply is disconnected before attempting any wiring. If you are unsure about electrical wiring, consult a qualified electrician.
This touch sensor switch is suitable for metal body lamps, floor lamps, bedside lamps, and mirror headlamps.
Wiring Diagram:

Image: Top view of the touch sensor switch with wiring labels.
Wiring Instructions:
- Red Wire: Connect to the input (plug) live/firewire.
- Black Wire: This is the common neutral line. Connect it to both the input neutral line and the neutral line of the light bulb.
- White Wire: Connect to the output live/firewire of the light source (i.e., the live wire of the light bulb).
- Yellow Wire (with ground lug): This wire must be securely fixed to the metal rod or metal part of the lamp base (e.g., iron or stainless steel). It cannot be connected to plastic. This connection is crucial for the touch functionality.
Internal Circuit Board View:

Image: Internal view of the touch sensor switch PCB.
4. Operating Instructions
The touch sensor switch provides a four-segment dimming function:
- First Touch: When you touch any metal part of the lamp body, the light will turn on to a slightly bright state.
- Second Touch: Touch the lamp again, and the light will become brighter (medium brightness).
- Third Touch: Touch the lamp a third time, and the light will reach its brightest level.
- Fourth Touch: Touch the lamp a fourth time, and the light will turn off.
The switch uses human static electricity to trigger its internal chip, controlling the light's state and brightness.
5. Maintenance
- Keep the device dry and away from moisture.
- Do not expose the device to extreme temperatures.
- Clean the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure all wiring connections remain secure.
6. Troubleshooting
- Light does not turn on/off or dim:
- Check all wiring connections (Red, Black, White, Yellow) for proper installation as per Section 3.
- Ensure the yellow wire is securely connected to a metal part of the lamp and not plastic.
- Verify that the lamp is receiving power.
- Confirm that the bulb type is compatible (incandescent or halogen only, not LED or energy-saving bulbs).
- Check that the bulb's wattage is within the 15-85W range.
- Intermittent operation:
- Ensure the lamp's metal body is clean and free from insulating coatings that might interfere with touch detection.
- Check for loose connections.
7. User Tips
- Pre-installation Check: Some users have reported finding small solder balls on the PCB. It is recommended to carefully inspect and clean the circuit board before installation to prevent potential issues.
- Bulb Compatibility is Key: This switch is specifically designed for traditional incandescent and halogen bulbs. Using LED or energy-saving bulbs will result in improper function or no function at all.
- Convenience: This touch switch eliminates the need to fumble for a physical switch in the dark, offering a convenient way to control your lighting.
- Safety: The integrated surge absorber helps ensure safe electricity usage and protects against external interference.
8. Warranty and Support
For warranty information, please refer to the terms provided by your retailer or seller at the time of purchase. Keep your proof of purchase for any warranty claims.
For technical support or further assistance, please contact the seller or manufacturer directly.
A user manual in PDF format may be available from the seller for additional details.