1. Introduction
Thank you for choosing the NieNie Voice Control Large Digital Wall Clock. This versatile LED clock offers multiple display modes, dual alarms with snooze, temperature display, and voice-activated wake-up functionality. Please read this manual carefully to ensure proper setup and operation of your new clock.
2. Safety Information
- Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
- Keep the device away from water and other liquids.
- Use only the specified power supply (DC5V via USB) or 3xAAA batteries.
- Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.
- Keep out of reach of children.
3. Package Contents
Please check the package for the following items:
- NieNie Voice Control Large Digital Wall Clock
- USB Power Cable (DC5V)
- Instruction Manual (this document)
Note: 3xAAA batteries and a USB power adapter are not included and must be purchased separately.
4. Product Overview
4.1 Key Features
- Two Display Modes: Time only, or Time, Date, and Temperature cycle display.
- Three-level Brightness Adjustment.
- Dual Alarm Function with Snooze.
- Voice-controlled Wake-up (in AAA battery mode).
- Daylight Saving Time (DST) function.
- 12/24 Hour Format Switching.
- Celsius/Fahrenheit Temperature Unit Conversion.
4.2 Product Dimensions

4.3 Display Examples


5. Setup
5.1 Powering the Clock
The clock can be powered in two ways:
- USB Power Supply (DC5V): Connect the provided USB cable to the clock and a DC5V USB power adapter (not included). The clock display will remain continuously on.
- 3xAAA Batteries: Insert 3xAAA batteries (not included) into the battery compartment. In this mode, the display will turn off automatically after 5-10 seconds to conserve power.

5.2 Initial Power-on
Upon first power-on, the clock will typically display a default time. You will need to set the correct time, date, and other preferences as described in the Operating Instructions section.
6. Operating Instructions
The clock features several buttons for setting and adjusting its functions. A 'long press' refers to holding the button for approximately three seconds. If no operation is performed for 5 seconds during setting, the clock will automatically exit the setting mode.
6.1 General Settings
- 12/24H Switching:
In time display state, press the [SET] button. The display will show '24H'. Press the [+/-] button to switch between 12H and 24H format. - Clock Time Setting:
Press the [SET] button again. The hour will flash. Press the [+/-] button to adjust the hour.
Press the [SET] button again. The minute will flash. Press the [+/-] button to adjust the minute. - Year, Month, and Day Setting:
Press the [SET] button again. The year will flash. Press the [+/-] button to adjust the year.
Press the [SET] button again. The month will flash. Press the [+/-] button to adjust the month.
Press the [SET] button again. The day will flash. Press the [+/-] button to adjust the day. - Night Mode Setting:
Press the [SET] button again. The display will show 'SL.OF' or 'NO'. Press the [+/-] button to turn on/off night mode.
Press the [SET] button again to exit setup and return to time display.
6.2 Display Mode Setting
Long press the [SET] button to switch between display modes:
- Mode 1: Displays time only (with week display).
- Mode 2: Cycles through time, date, and temperature (with week display).
6.3 Temperature Unit Conversion
In time display state, short press the [+/-] button to switch the temperature unit between Celsius (°C) and Fahrenheit (°F).
6.4 Brightness Adjustment
In time display state, short press the [+] button to cycle through brightness levels: L-01 (low), L-02 (medium), L-03 (high).
6.5 Night Mode (Automatic)
The clock will automatically enter a low brightness mode between 22:00 (10 PM) and 06:00 (6 AM).
6.6 Daylight Saving Time (DST) Setting
In time display state, long press the [SET] button to enable or disable DST. The 'DST' indicator will appear or disappear accordingly.
6.7 Alarm Settings
- Switch Alarm Clock:
Press the [ALARM] button to display the alarm icon (e.g., '1' or '2') and its current state (ON/OFF).
Press the [+/-] button to toggle the alarm ON or OFF. - Setting Alarm Time:
With the alarm icon displayed, press the [SET] button to set Alarm 1. The hour will flash. Press the [+/-] button to adjust the hour.
Press the [SET] button again. The minute will flash. Press the [+/-] button to adjust the minute. - Alarm Modal Setting (Frequency):
Press the [SET] button again to adjust the alarm frequency:- 1-5: Alarm sounds Monday to Friday.
- 1-6: Alarm sounds Monday to Saturday.
- 1-7: Alarm sounds Monday to Sunday (daily alarm).
Finish alarm setting by pressing [SET] again to return to time display.
- Turning Off Alarm / Snooze:
When the alarm rings, long press any button to turn off the alarm for that instance. The alarm will be active again at the next scheduled time.
Short press any button to activate the snooze function. The alarm will sound again after a short interval.
6.8 Voice Control Function
When powered by 3xAAA batteries, the display will automatically turn off after 5-10 seconds. To wake up the screen for 5-10 seconds, clap your hand or knock on the table with a sound level over 60dB.
7. Maintenance
- Clean the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- If using batteries, replace them when the display becomes dim or functions become erratic.
- Store the clock in a dry place when not in use for extended periods.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock display is off or dim. | No power, low batteries, or in voice control mode (battery powered). | Check USB connection or replace batteries. If battery powered, activate voice control to wake display. |
| Clock not responding to button presses. | Temporary software glitch or low power. | Disconnect power/remove batteries for a few minutes, then reconnect. Ensure adequate power. |
| Alarm not sounding. | Alarm is OFF, volume too low (if adjustable), or incorrect alarm time/frequency set. | Ensure alarm is set to ON. Verify alarm time and frequency settings. |
| Voice control not working. | Not in battery mode, or ambient noise is too low/high. | Ensure clock is running on 3xAAA batteries. Try a louder clap or knock. |
9. Specifications
| Attribute | Detail |
|---|---|
| Model Number | DS-6638/NNBB-24008 |
| Brand Name | NieNie |
| Type | Wall Clocks |
| Display Type | DIGITAL |
| Motivity Type | Digital |
| Material | Plastic |
| Body Material | Plastic |
| Shape | Geometric |
| Style | Brief |
| Length | 215mm |
| Width | 3cm |
| Diameter | 21.5cm |
| Weight | 310g |
| Form | Single Face |
| Applicable Placement | LIVING ROOM |
| Feature | Calendars |
| Battery Included | No |
| Is Smart Device | No |
| High-concerned Chemical | None |
10. User Tips
- For continuous display without voice control, always use the USB power cable.
- If you prefer the voice-activated wake-up feature, ensure the clock is powered solely by 3xAAA batteries.
- When setting the time or alarms, remember that if no button is pressed for 5 seconds, the clock will automatically exit the setting mode.
11. Warranty & Support
For detailed warranty information and customer support, please refer to the official product documentation or contact the seller directly. A comprehensive user manual in PDF format is also available for download: