WELLMEET WM-SP608E

Contents

SP608E Phantom Bluetooth Music LED Controller User Manual

Model: WM-SP608E | Brand: WELLMEET

1. Introduction

The WELLMEET SP608E is an advanced 8-channel pixel LED controller designed for dynamic and customizable lighting effects. It offers flexible control via both a dedicated RF remote and a mobile application, allowing users to manage multiple LED light strips independently or in groups. With support for various single-wire LED driver ICs, built-in music and non-music effects, and trigger functions, the SP608E is ideal for diverse lighting applications.

Key Features:

  • Dual Control Modes: Operates via mobile APP (iOS/Android) and RF remote control.
  • 8 Independent Signal Outputs: Supports 8 different lighting effects simultaneously, catering to various application needs.
  • Wide Compatibility: Supports common single-wire LED driver ICs.
  • Dynamic Effects: Features built-in music and non-music effects with adjustable parameters (speed, brightness, effect length, color).
  • Grouping Function: Allows flexible grouping and combined control of channels.
  • Trigger Function: Customizable trigger effect parameters for automated lighting responses.
  • Wide Voltage Input: DC5-24V with reverse connection protection.
  • Memory Function: Automatically saves setting parameters upon power loss.
SP608E LED Controller and RF Remote

Figure 1: SP608E LED Controller and RF Remote Control

2. Package Contents

Please check the package contents upon receipt to ensure all items are present and undamaged:

  • 1 x SP608E LED Controller
  • 1 x RF Remote Control
  • 1 x Audio Cable (for MIC AUX input)
  • 1 x Small Screwdriver
  • 1 x User Manual (this document)
SP608E Package Contents

Figure 2: SP608E Controller, Remote, and Accessories

3. Specifications

AttributeValue
Product ModelSP608E
Input VoltageDC 5-24V
Control TypeRemote Control / BT APP Control
Controllable Pixels4800 pixels (600 pixels/Port * 8)
Output Port8 PCS
ApplicationDigital Addressable LED Light
Connection ModeSmart APP or Remote Control
Output SignalSPI (TTL) Digital Signal
SupportiOS 10.0+/ Android 4.4+
Working Temperature-20°C ~ 60°C
MaterialPLASTIC
CertificationCE, ROHS
SP608E Dimensions and Specifications

Figure 3: Product Dimensions and Key Specifications

4. Safety Precautions

  • Installation and debugging should be performed by qualified professionals.
  • This product is not waterproof. For outdoor use, ensure it is protected within a waterproof box.
  • Ensure good heat dissipation. Install the product in a well-ventilated environment to extend its service life.
  • Avoid installing or using this product in areas with lightning, strong magnetic fields, or high voltage.
  • Verify that the output voltage of the LED power supply matches the product's voltage range (DC 5-24V).
  • The diameter and size of the wires used must be sufficient for the connected LED fixtures. Ensure secure wiring to prevent accidents from heat or poor contact.
  • Before powering on and debugging, confirm all wiring is correct to prevent damage to lighting fixtures due to wiring errors.
Installation Precautions for SP608E

Figure 4: Important Installation Precautions

5. Setup and Wiring

Wiring Connection:

Connect the SP608E controller to your DC 5-24V power supply and LED light strips as shown in the diagram below. Ensure correct polarity (VCC to VCC, GND to GND, and DAT to DAT for each strip).

SP608E Wiring Diagram

Figure 5: Wiring Diagram for SP608E Controller to LED Strips and Power Supply

App Installation:

The controller is compatible with both iOS and Android systems. For iOS devices, iOS 10.0 or higher is required. For Android devices, Android 4.4 or higher is required.

  1. Search for "SceneX" in the App Store (iOS) or Google Play Store (Android).
  2. Download and install the application.
  3. Alternatively, scan the QR code provided in the product packaging or manual to download the app.

6. Operating Instructions

6.1 Mobile App Operations:

The SceneX app provides comprehensive control over your SP608E controller.

  1. **Connect Device**: Open the app and click the "+" button in the top right corner of the home page to add a device. Once successfully added, click on the device to enter the control page.
  2. **Rename Controller**: You can rename the controller by clicking on the settings button (usually a gear icon) in the upper right corner.
  3. **Channel Control**: The SP608E can output 8 different signals. You can click on individual channels (Channel 1-8) to control them separately, or select "All Channels" for unified control.
  4. **Save Scenes**: After adjusting the effects of each channel, click the save button (often a disk or heart icon) in the upper right corner to save the current lighting effect settings to a scene. The SP608E supports a total of 9 scenes, which can be recalled from the scene page of the mobile app or using the RF remote control.
  5. **Timing Events**: Set up to five timing events by clicking on the clock icon button in the upper right corner. Note that all timing events will be deleted if the controller loses power.
  6. **Effect Adjustment**: On the effects page, explore a variety of music and non-music effects. Adjust parameters like speed, brightness, effect length, and color for specific effects.
  7. **Color Verification & Copy**: On any single-channel page, click the upper right corner button to verify the color and copy the channel's effect to another channel.
  8. **Trigger Function**: The trigger page features four triggers, each with preset and dynamic effects. Click the trigger button to switch between preset and custom effects. Enter the dynamic effect selection interface by clicking any trigger area. Confirm the selected effect with the upper right corner button and cancel with the upper left corner button. Long-press a trigger area to rename it, adjust lasting time, and assign channels.
  9. **Grouping Function**: On the grouping page, click the add group button in the lower right corner. Select the channels to be associated with the group and confirm. The group page displays the added groups, allowing control over the effect mode of the channels within each group.
SP608E App Control Interface

Figure 6: SP608E Controller controlled via mobile app

6.2 RF Remote Control Functions:

The included RF remote provides quick access to essential functions and scene selection.

SP608E RF Remote Control Layout

Figure 7: RF Remote Control Button Functions

  • **ON/OFF**: Power on/off the controller.
  • **Lock/Unlock**: Press for 5 seconds to lock the remote.
  • **Speed +/-**: Adjust the speed of dynamic effects.
  • **Brightness +/-**: Adjust the brightness of the LEDs.
  • **Scene Auto**: Cycles through programmed scenes automatically.
  • **1-9 Buttons**: Directly select one of the 9 saved scenes.

6.3 Video Demonstration:

Watch this video for a visual guide on setting up and operating your SP608E controller, including app control, effect customization, and trigger functions.

Video 1: SP608E Controller Features and App Demonstration

7. User Tips

  • For best music synchronization, ensure the audio source is close to the controller's microphone or connected via the AUX input.
  • Experiment with different effect lengths and speeds in the app to create unique lighting patterns.
  • Utilize the grouping function to control multiple LED strips simultaneously for synchronized displays.
  • Regularly check wiring connections to ensure stability and prevent flickering or inconsistent lighting.

8. Maintenance

  • Keep the controller clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the controller to extreme temperatures or high humidity.
  • Ensure adequate ventilation around the controller to prevent overheating.
  • Periodically check all cable connections for any signs of wear or looseness.

9. Troubleshooting

  • **LEDs not lighting up**:
    • Check power supply connection and ensure it's within DC 5-24V.
    • Verify all wiring connections (VCC, GND, DAT) are correct and secure.
    • Ensure the LED strips are compatible with SPI (TTL) digital signal.
    • Check if the controller is powered on and the remote/app is sending commands.
  • **Inconsistent or flickering lights**:
    • Inspect wiring for loose connections or damage.
    • Ensure the power supply is sufficient for the total length/number of pixels of your LED strips.
    • Check for strong electromagnetic interference nearby.
  • **App not connecting to controller**:
    • Ensure Bluetooth is enabled on your mobile device.
    • Restart the app and the controller.
    • Make sure your mobile device meets the minimum OS requirements (iOS 10.0+ or Android 4.4+).
    • Try re-pairing the device in the app.
  • **Remote control not working**:
    • Check the battery in the remote control.
    • Ensure the remote is not locked (press Lock/Unlock for 5 seconds to toggle).
    • Make sure there are no obstructions between the remote and the controller.

10. Warranty and Support

Warranty Policy:

Our LED controller products come with lifelong technical support and warranty services.

  • **Free Warranty**: If any quality issues occur within two years from the date of purchase, we will provide free repair or service replacement.
  • **Paid Warranty**: Products exceeding the free warranty period will incur a charge for repair materials.

Exclusions from Free Warranty:

  • Damage caused by excessive voltage, overload, or improper operation.
  • Wiring errors, water immersion (for non-waterproof products), or unauthorized repairs.
  • Serious damage or deformation to the appearance due to transportation or physical impact.
  • Damage caused by natural disasters or uncontrollable human factors (e.g., earthquakes, floods, fires).

Repair and Replacement Process:

  • Our maximum responsibility is to replace products with the same model and quantity.
  • To expedite repair or replacement, please indicate the fault phenomenon, operating environment, and actions taken when the fault occurred.
  • Upon receiving the returned product and initial accessories, we will repair or replace it. The customer is responsible for the logistics cost of the return.
After-Sales Service Information

Figure 8: After-Sales Service Details

11. Certifications

The SP608E controller complies with national and international certification standards, ensuring safe and worry-free use.

Product Certifications (CE, ROHS)

Figure 9: Product Certifications including CE and ROHS

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.