1. Product Overview
Thank you for purchasing our Handguard Extensions. This product is designed to enhance your riding experience by providing superior wind and weather protection while maintaining a sleek, aerodynamic appearance.
Key Features:
- Improved Aerodynamics: Aerodynamically shaped to reduce wind resistance, providing additional protection without compromising vehicle balance.
- Lightweight & Durable: Constructed from high-quality ABS Plastic (Polycarbonate Material), offering high strength, rigidity, tensile strength, and excellent gloss finish.
- Weather & Impact Resistant: Heat-resistant and UV-stabilized to prevent yellowing or cracking. Provides effective hand protection against cold, rain, debris, and impacts during long rides.
- Perfect Fit: Designed to attach directly to your stock hand guards for extended coverage, perfectly following their contours.
2. Specifications
| Attribute | Detail |
|---|---|
| Condition | 100% Brand New |
| Material | High-Quality ABS Plastic (Impact-Resistant & UV-Resistant) |
| Item Type | Covers & Ornamental Mouldings |
| Item Weight | 0.22kg |
| Motobike Make | Triumph |
| Fitment | For Tiger 1200 GT 2022-, For Tiger 1200 Rally Pro 2022-, For Tiger 1200 GT Pro 2022- |
| Installation Position | Both sides of the handlebar |
| Origin | Mainland China |
| Protective parts | Other |
| High-concerned chemical | None |
3. Package Contents
The kit includes the following components:
| Item | Quantity |
|---|---|
| Mouldings (pair) | 2 |
| Brackets (pair) | 2 |
| Bolt | 4 |
| Washer | 8 |
| Nyloc Nut | 4 |
| Foam Strip | 2 |
4. Installation Instructions
The Handguard Extensions are designed for easy installation onto your existing motorcycle handguards. Please follow these steps carefully:
Step 1: Preparation
- Ensure your motorcycle's handlebars and stock hand guards are clean and free of dirt, grease, or rust.
- Lay out all components: windshield panels, mounting brackets, and hardware (if included).
Step 2: Positioning
- Place the ABS plastic windshield panel over your existing hand guard, aligning it with the mounting points.
- Ensure the curvature faces forward to deflect wind effectively.
Step 3: Mounting
- Secure the windshield using the original hand guard mounting bolts or included fasteners.
- Tighten screws evenly to avoid cracking the plastic. Do not over-tighten.
Step 4: Final Check
- Gently shake each side to confirm stability.
5. Usage Guidelines & Restrictions
Recommended Use:
- Use during cold, rainy, or windy riding conditions.
- Ideal for long-distance touring where hand comfort is essential.
- Suitable for street and highway riding.
Usage Restrictions:
- Not intended for off-road racing or extreme motocross use.
- Do not modify the product (e.g., drilling, cutting, or heating) as this may compromise structural integrity.
- Avoid prolonged exposure to direct flame or extreme heat sources above 80° C.
- Not recommended for use on motorcycles not listed in the fitment guide (Triumph Tiger 1200 models 2022-).
6. Safety Information & Warnings
⚠️ Risk of Injury or Accident
- Improper installation may result in loss of control, component failure, or personal injury.
- Always ensure the windshield is securely fastened before riding.
⚠️ Interference Check
After installation, verify that the windshield does not obstruct:
- Handlebar turning radius
- Brake or clutch lever operation
- Throttle response
⚠️ High-Speed Riding
At high speeds, aerodynamic forces may increase. Ensure all mounting points are tightened to manufacturer specifications.
⚠️ Child Safety
Keep packaging materials (plastic bags, foam, etc.) away from children to prevent suffocation hazards.
7. Maintenance & Care
Cleaning:
- Clean with mild soap and water. Avoid abrasive cleaners or solvents.
- Wipe dry with a soft cloth to maintain gloss finish.
Inspection:
- Inspect mounting hardware regularly for looseness, especially after initial installation.
8. Troubleshooting
- Missing Hardware: If any small components like washers are missing, please check the packaging thoroughly. Contact support if items are genuinely missing.
- Fitment Issues: If the extensions do not fit perfectly, minor adjustments such as trimming with a utility knife may be required, especially near mirrors or other motorcycle components.
- Bolts Too Short: In some cases, the provided bolts might not be long enough for your specific setup. You may need to source slightly longer bolts for a secure fit.
- No Fitting Instructions: This manual serves as the official fitting instruction. Please refer to Section 4 for detailed steps.
9. User Tips
- For a cleaner aesthetic, consider using shorter bolts if your installation allows, provided they ensure secure fastening.
- Some users have found success using rivets to permanently fix the metal bracket to the plastic hand-guard for enhanced stability.
- Be prepared for minor trimming or adjustments to the plastic for a perfect fit, particularly around the mirror mounts or other handlebar accessories.
- Always double-check the length of your existing bolts against the new components; longer bolts might be necessary for certain configurations.
10. Frequently Asked Questions (FAQ)
- Q: Are these handguard extensions compatible with the Triumph Tiger 900 (2023 model)?
- A: No, these handguard extensions are specifically designed for Triumph Tiger 1200 models from 2022 onwards (GT, Rally Pro, GT Pro).
- Q: Will these fit a Triumph Tiger 1200 from the year 2016?
- A: No, the fitment is for Triumph Tiger 1200 models manufactured from 2022 onwards.
11. Warranty & Support
We value your satisfaction. This product is manufactured in accordance with applicable international standards for motorcycle accessories, including compliance with 2006/42/EC (Machinery) for motorcycle components. The ABS plastic used meets RoHS and REACH compliance standards for material safety.
If you encounter any issues during purchase or with the product received, please contact us first via AliExpress message. We are committed to providing the best solution promptly.
For a detailed user manual in PDF format, you can refer to the official document: User Manual (PDF)