SIMICAM QJ-8M-P

Contents

SIMICAM 4K POE Security PTZ IP Camera User Manual

Model: QJ-8M-P | Brand: SIMICAM

1. Introduction

This manual provides comprehensive instructions for the installation, setup, and operation of your SIMICAM 4K POE Security PTZ IP Camera (Model: QJ-8M-P). This camera features 4K UHD resolution, Power over Ethernet (PoE) for simplified installation, Pan-Tilt-Zoom (PTZ) capabilities, color night vision, two-way audio, and advanced motion detection with AI human detection. Please read this guide carefully before using the product and retain it for future reference.

SIMICAM 4K POE Security PTZ IP Camera with features listed

Figure 1: SIMICAM 4K POE Security PTZ IP Camera highlighting key features like 4K UHD, 5MP/4MP options, 2-way audio, IP66 weather resistance, PoE, night vision, and free app support.

2. Safety Information

  • Ensure all power connections are secure before applying power to the camera.
  • This is a PoE+ device; use a compatible PoE+ router or switch for optimal performance.
  • If using a DC12V, 2A adapter, ensure a wall outlet is nearby and do not apply power until the connection is secured.
  • The camera is rated IP66 for outdoor use, providing protection against dust and water jets.
  • Do not attempt to disassemble or modify the camera, as this will void the warranty and may cause damage.
  • Keep the camera away from strong magnetic fields or corrosive environments.

3. Package Contents

Please check the package for the following items:

  • SIMICAM 4K POE Security PTZ IP Camera
  • Mounting Bracket
  • Screws and Wall Plugs
  • Quick Guide (PDF version available online)
  • (Optional) DC12V, 2A Power Adapter (if not using PoE)

4. Specifications

Feature Specification
Brand NameSIMICAM
Model NumberQJ-8M-P
High Definition8.0 Megapixels (4K)
Megapixels8MP
ConnectivityIP/Network Wired
Power SupplyWith Poe (48V POE/ 12V2A)
Lens (mm)3.6mm Fixed focal length
Viewing Angle90°
IR Distance (m)About 10-30m
Minimum Illumination (Lux)0.01LUX
Video Compression FormatH.265
SensorCMOS
IP RatingIP66
InstallationNormal
Power Consumption (W)8W
Supported Mobile SystemsAndroid, iOS
Supported Operating SystemsWindows 7, Windows 10
App NameOther (XMeye Pro, ICSEE, XMEYE PRO)
ONVIFSupport

5. Setup Guide

5.1. Connection & Installation

This camera is a PoE+ device, meaning it can receive both power and data through a single Ethernet cable when connected to a PoE+ compatible router or switch. If PoE+ is not available, the camera can be powered using a DC12V, 2A adapter.

Important: Do not apply power to the adapter until all connections are securely made.

PoE wiring diagram showing connections to NVR, PoE Router/Switcher, and optional DC12V power

Figure 2: Connection options for the PoE camera. Connect via Network Cable to a PoE NVR or a PoE Router/Switcher. Alternatively, use a DC12V power supply and Network Cable to a standard router/switcher.

5.2. Camera Access Setup

Access your camera using the following methods:

  • Default Username: admin
  • Default Password: Null (No Password)

It is highly recommended to change the default password immediately after initial login for security reasons.

Camera Related Software & Tool Name:

5.3. Setup Camera via APP (XMeye Pro)

The "XMeye Pro" app is available for free on the APP Store (iOS 6.0 or later) and Google Play Store (Android 3.0 or later). The app interface may vary slightly due to updates.

Before setup:

  • Ensure the camera is plugged into a PoE+ switch or other power source, and the Ethernet cable is connected from the camera to your router.
  • Make sure your camera and mobile device are on the same network during the setup process.
  • Rebooting the camera is recommended to ensure it connects to the cloud.
App Store and Google Play logos

Figure 3: Download XMeye Pro from the App Store or Google Play.

5.3.1. Register Account

  1. Download and open the XMeye Pro APP.
  2. Click on "Sign Up" to register a new account.
  3. Fill out the required information (E-mail, Verification Code, User Name, Password) to complete registration.

(Refer to the app's registration screen for visual guidance.)

5.3.2. Add Device

  1. Tap on "Add Device" in the app.
  2. Select "Wired Camera" from the options.
  3. Tap on "LAN Search" and then "Next". The app will search for devices on your local network.
  4. If the device is already set up and you know its serial number and password, you can choose "Add Device Manually".
  5. Tap on the detected camera in the list.
  6. Enter the default username "admin" and leave the password blank (Null), then tap "Add".

(Refer to the app's Add Device screens for visual guidance.)

5.3.3. Setup a Password

  1. Once the device is successfully added, it will be displayed in the app interface.
  2. If you logged in with the default password, the app will prompt you to set a new password for security. Click "OK" to proceed.
  3. Leave the "Old Password" field blank.
  4. Create a "New Password" (8-64 characters, must contain letters and numbers).
  5. Confirm the new password by re-entering it.
  6. Tap "Save".

(Refer to the app's password setup screens for visual guidance.)

6. Operating Instructions

6.1. Change APP Login Password

  1. Navigate to the "Me" tab in the app.
  2. Tap on "User Management".
  3. Click "Change Password" to modify your app login password.

(Refer to the app's User Management screens for visual guidance.)

6.2. Motion Detection

The camera supports AI Human Detection and email alerts.

  1. From the live view interface, click the "settings" icon.
  2. Go to "Intelligent Alarm".
  3. Enable "Human Detection" and set up "Alarm Linkage".
  4. To receive motion alerts, ensure "App Push" and "Allow Notifications" are enabled.
Smart Email Alert with AI Human Detection

Figure 4: Smart Email Alert feature with AI Human Detection, triggering email notifications upon detection.

6.2.1. Customize Alarm Area

You can define specific areas for motion detection:

  • Alert Line: The alarm will trigger only when an object crosses a defined line.
  • Alert Area: The alarm will trigger only when motion is detected inside a specified area.

(Refer to the app's Alert Line and Alert Area customization screens for visual guidance.)

6.2.2. Customize Audible Alert Message

Set up an audible alarm for intruder warnings, including custom sounds.

  1. In the "Intelligent Alarm" settings, find "Alarm Sound".
  2. Turn on the alarm and select an alarm sound type (e.g., "Alert area, please leave", "Hello welcome", "Howling alarm", or "The custom").
  3. To adjust the loudspeaker volume, navigate to "Advanced Settings" → "Loud speaker Volume".

(Refer to the app's Alarm Sound and Loudspeaker Volume settings for visual guidance.)

6.3. Share Device

You can share camera access with family members:

  1. Tap on the "Share" option in the app.
  2. Edit permissions for the shared user.
  3. The app will generate a QR code. Your friend can add the device by scanning this QR code (they need to register an account first).
  4. Alternatively, you can manually input your friend's app username to share.

(Refer to the app's Share Device screens for visual guidance.)

6.4. Zoom In and Zoom Out

The camera supports up to 8x digital zoom.

  • In the live view, use your finger to slide from left to right to zoom in and out.

(Refer to the app's live view screen for visual guidance on zoom control.)

6.5. PTZ Control (Pan-Tilt-Zoom)

The camera offers Pan (270°) and Tilt (90°) functionality. Note: Only certain models (5X and 30X Optical Zoom) support this function. This model features digital zoom.

Pan 270 degree Tilt 90 degree diagram

Figure 5: Pan 270° and Tilt 90° movement capabilities of the camera.

6.5.1. Setting up and Calling Preset Points/Cruise Lines

On the NVR:

  1. Right-click the mouse from the home screen and enter "PTZ Control".
  2. Add preset point: Adjust the camera to the desired position, input the number, and click "+".
  3. Delete preset point: Input the preset point number and click "-".
  4. Call Preset/Cruise Line: Input the preset point/cruise line number and click "Start". The camera will move to that position.

(Refer to the NVR's PTZ Control interface for visual guidance.)

On the APP:

  1. Add preset point: Adjust the camera to the desired position, tap "Add", input the number, and click "OK".
  2. Delete preset point: Tap "Select", choose the preset point number, then tap "Delete".
  3. Call Preset/Cruise Line: Tap "Select", choose the preset point number, then tap "Call Preset". The camera will move to that position.

(Refer to the app's PTZ control interface for visual guidance.)

On the VMS (PC Client):

  1. Add preset point: Adjust the camera to the desired position, select a preset point number, and click "+".
  2. Delete preset point: Select a preset point number and click "-" to delete it.
  3. Call Preset/Cruise Line: Select a preset point/cruise number, click the play button (►) or the stop button (■). The camera will move to the particular position; clicking the stop button will halt movement.

On the Web Browser:

  1. Add preset point: Adjust the camera to the desired position, select a preset point number, and click "+".
  2. Delete preset point: Select a preset point number and click "-" to delete it.
  3. Call Preset/Cruise Line: Select a preset point/tour number, click the play button (►) or the stop button (■). The camera will move to the particular position; clicking the stop button will halt movement.

(Refer to the web interface's PTZ control for visual guidance.)

6.6. Night Vision Modes

The camera supports multiple night vision modes for clear surveillance in low-light conditions:

  • Day Vision: Full color during daylight hours.
  • Infrared: Black and white vision using IR LEDs in low light.
  • Double Light: Color night vision using both IR and white light LEDs for enhanced detail.
Day vision, Infrared, and Double Light night vision modes comparison

Figure 6: Comparison of Day vision (color), Infrared (black and white), and Double Light (color) night vision modes.

6.7. Two-Way Audio

The camera features built-in microphone and speaker for two-way communication.

  • Use the app to listen to audio from the camera's location.
  • Speak through the app to transmit audio via the camera's speaker.
Two-way audio demonstration with a person speaking to a delivery driver

Figure 7: Demonstration of two-way audio, allowing communication with visitors or delivery personnel.

6.8. Product Video

Watch this video for a general overview and demonstration of the camera's capabilities.

Video 1: Product demonstration showcasing the camera's features and outdoor performance.

7. Maintenance

  • Cleaning: Use a soft, damp cloth to clean the camera lens and body. Avoid harsh chemicals or abrasive materials.
  • Firmware Updates: Periodically check for firmware updates through the XMeye Pro app or the official website to ensure optimal performance and security. While tools like IPCBatchTool exist for IP address configuration and firmware updates, some users have reported issues with device recognition. Proceed with caution and consult support if needed.
  • Regular Checks: Ensure all cables are securely connected and free from damage. Verify that the camera's mounting is stable.

8. Troubleshooting

  • Camera not connecting to network:
    • Ensure the Ethernet cable is properly connected and your PoE+ switch/router is functioning correctly.
    • Verify that the camera and your mobile device are on the same network during initial setup.
    • If using DHCP, check your router's client list for the camera's assigned IP address. Some users report issues if the camera's default gateway (e.g., 192.168.0.1) conflicts with your network range. You may need to temporarily adjust your network settings or use an ONVIF Device Manager to configure a static IP.
    • Reboot the camera and your network equipment.
  • App not connecting to camera:
    • Confirm the camera is powered on and connected to the network.
    • Ensure you have registered an account and added the device correctly in the XMeye Pro app.
    • Try rebooting the camera.
  • Web interface issues:
    • Some users report that the web interface may require specific plugins or offer limited functionality without additional software. Consider using the dedicated PC client (VMS) or mobile app for full control.
  • Image appears purple or night vision is unclear:
    • Check camera settings for color balance or night vision mode.
    • Ensure the camera lens is clean and free from obstructions.
    • Verify sufficient ambient light for color night vision (Double Light mode).
  • Cannot remove timestamp/camera name watermarks:
    • Some users have noted that this functionality might not be available through the standard web interface and may require specific software or advanced configuration not covered in this manual.
  • ONVIF connection parameters:
    • The camera supports ONVIF. Default credentials are typically username 'admin' with no password. You may need to use an ONVIF Device Manager to discover the camera and configure it for integration with third-party NVRs or home automation systems.
  • User manual in other languages:
    • This manual is provided in English. For additional language support or a downloadable PDF version, please refer to the official product page or contact customer support. A PDF version of the user manual is available at this link.

9. User Tips

  • NVR & Home Assistant Integration: This camera is known to integrate well with various NVRs (e.g., Hikvision) and home automation platforms like Home Assistant (via Frigate) using ONVIF. Utilize ONVIF Device Manager for initial discovery and configuration.
  • PTZ Responsiveness: While PTZ functionality is available, some users find the control to be a bit jumpy. Practice smooth movements for better control.
  • Network Configuration: If experiencing IP address conflicts or difficulty connecting, manually setting a static IP address via ONVIF Device Manager can resolve issues, especially if your network's default gateway differs from the camera's default.
  • Power Supply: As a PoE camera, it typically does not include a separate DC power adapter. If you require a DC power source, ensure you purchase a compatible 12V 2A adapter separately.
  • Consideration for Placement: Although advertised for outdoor use (IP66), some users suggest considering indoor placement for optimal longevity and performance, depending on specific environmental conditions.

10. Warranty & Support

For warranty information, technical support, or any product-related inquiries, please contact the seller or refer to the product listing on the platform where it was purchased. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.