1000m Pet Remote Control Dog Training Collar 1000m Pet Remote Control Dog Training Collar

Contents

Dog Training Collar User Manual

Waterproof Rechargeable 1000m Pet Remote Control Electric Shocker with Shock, Vibration, and Sound

1. Introduction

Product Overview

This fully waterproof e-collar is designed for effective dog training. It offers various functions including vibration alert, electric shock, and beep modes, all controllable within an effective range. The remote design allows for remote bark stopping, correction of undesirable behaviors like running away, easy recall, and discouraging biting and fighting. It serves as a valuable assistant for pet owners in training their dogs.

This training collar is suitable for large, medium-sized, and small dogs.

Dog Training Collar Remote and Receiver
The remote control and receiver collar.

Package Contents

The package typically includes:

  • Remote Control (1)
  • Receiver Collar (1, 2, or 3 depending on the model)
  • USB Charging Cable (1)
  • Lanyard (1)
  • Test Light (1)
  • Silicone Caps (various quantities depending on receiver count)
  • User Manual (this document)
Dog Training Collar Package Contents
Typical contents of the Dog Training Collar package.

2. Key Definitions

Familiarize yourself with the remote control's buttons and features:

Remote Control Labeled Diagram
Remote control with labeled parts.
  1. Antenna: Transmits the signal strongly.
  2. LED Light: Press to turn on/off.
  3. LCD Screen: Displays modes, levels, and channels.
  4. Shock Button: Press to select Shock mode. Use +/- buttons to adjust levels (0-99). Press again to activate shock.
  5. Vibration Button: Press to select Vibration mode. Use +/- buttons to adjust levels (0-99). Press again to activate vibration.
  6. Sound Button: Press to select Sound mode. No level adjustment needed; press to make the receiver emit a "Bee--" sound.
  7. + Button: Increases training levels.
  8. - Button: Reduces training levels.
  9. Channel (CH) Button: Selects training channel (CH1/CH2/CH3).
  10. Remote ON/OFF Switch: Toggles remote power.
  11. Light Button: Press to turn on/off the remote's LED. Press and hold for 2 seconds to turn on the receiver's white LED; press again for 2 seconds to turn it off. If not turned off manually, it will turn off automatically after 5 minutes.
  12. Charging Hole (Remote): For charging the remote.
  13. Power Button (Receiver): Press to turn on/off the receiver.
  14. Shock Static Electrode: Conducts safe static. Install rubber caps for pet's skin contact.
  15. Charging Hole (Receiver): For charging the receiver.
  16. Indicator Light (Receiver): Flashes during charging. Stays on when fully charged. Blinks every second when battery is low.

3. Setup

Charging Prior to Use

Before first use, ensure both the remote control and receiver are fully charged. Use the provided USB charging cable.

  • Connect the USB charging cable to the charging holes on the remote and receiver.
  • The remote's battery icon will flash while charging and become solid when fully charged.
  • The receiver's LED status light will flash during charging and remain on when fully charged.
  • Charging takes approximately 2 hours for both devices.
  • Note: The receiver enters sleep mode while charging and cannot receive signals. Ensure the charging port is dry before charging.

Product Switching On/Off

  • Remote Control: Toggle the ON/OFF button to the unlocked position to switch on, and to the locked position to switch off.
  • Receiver: Press the power switch button for 2 seconds to turn on (you'll hear a beep, and the LED will flash). Press again to turn off (you'll hear two beeps, and the LED will flash).

Pairing the Remote Control and the Receiver

The product is typically pre-matched at the factory (usually to CH1). If re-pairing is needed or for additional receivers:

  1. Turn on the remote control and select a channel (CH1/CH2/CH3) using the CH button.
  2. Turn on the receiver by pressing its power button for 2 seconds. You will hear a beep, and the receiver's LED status light will flash.
  3. Within 10 seconds of the receiver's beep, press the vibrate, shock, or beep button on the remote control. A second beep from the receiver indicates successful pairing.

Wearing the Receiver Collar

Adjustable Collar for All Dog Sizes
The adjustable collar is suitable for dogs from 15 to 100 pounds.
  1. Thread the collar strap through the receiver's collar holes.
  2. Thread the collar back through the buckle and tighten it.
  3. Place the receiver collar around your dog's neck.
  4. Adjust the collar to be snug enough that you can fit only one fingertip between the strap and your dog's neck.

4. Operation

Training Modes

The collar offers three primary training modes: Beep, Vibration, and Static (Electric Shock), along with a Light mode for visibility.

Three Dog Training Modes Diagram
Diagram illustrating Beep, Vibration, and Static modes.
  • Beep Mode: Suitable for initial training. Press the Sound button on the remote.
  • Vibration Mode: Helps limit bad behavior. Press the Vibration button on the remote.
  • Static Mode (Electric Shock): Recommended only in emergencies or for persistent bad behavior. Press the Shock button on the remote.
  • Light Mode: Activates an LED light on the receiver for night training or visibility. Press the Light button on the remote.

Adjusting Levels

For Vibration and Static modes, the intensity levels can be adjusted from 0 to 99 using the '+' and '-' buttons on the remote control. The LCD screen will display the current level.

Remote Control Range

The remote control offers a long-distance range of approximately 1000 meters, allowing you to train your dog effectively even when outdoors.

Remote Control in Use with Dog
Demonstration of remote control use with a dog.

Finding the Most Appropriate Training Level

1. Tone Training:

  • Dedicate 10-15 minutes per day for 2-3 days to help your dog understand the tone.
  • Associate the tone with rewards and praise.
  • Push the tone button for 2 seconds, then reward your dog. Allow 2-5 seconds before repeating.
  • Vary rewards to keep your dog engaged.

2. Finding the Best Shock Level:

  • Always start with the lowest intensity level (Level 1).
  • Gradually increase the intensity level on the LCD display.
  • Press the shock button and observe your dog's reaction.
  • Increase the level until your dog responds. If no response, increase again.
  • Record your dog's reactions and the intensity level to determine the optimal training level.

Product Features Video

A video demonstrating the product's features, including different training modes, lock screen function, LED light, and adjustable collar.

5. Maintenance

Waterproofing

The receiver collar is deeply waterproof, making it suitable for use in puddles, rain, snow, and even when dogs are swimming.

Dog Swimming with Waterproof Collar
The collar is designed to be waterproof, allowing dogs to swim while wearing it.

Cleaning and Care

  • Check the receiver and the collar every 1-2 hours, adjusting the position and tightness if necessary to prevent excessive pressure.
  • Daily check the skin health of your dog's neck. If any anomalies are found, discontinue use and consult a veterinarian.
  • Regularly wipe your dog's neck and the receiver's contact area with a towel every week.

6. Troubleshooting (Frequently Asked Questions)

Q: When I press the Remote control button, my pet does not react.

A:

  • Ensure the Receiver is turned on.
  • A low battery in the Remote control or Receiver can reduce the effective range.
  • Remote control distance can be affected by topography, weather, vegetation, and other radio equipment.
  • Increase the electric shock or vibration's intensity level.
  • Ensure that the Receiver's static electrodes are close to the dog's skin.

Q: The receiver will not respond to the operational signals from the Remote control.

A:

  • Check if the Receiver and Remote control are properly paired.
  • Verify that the remote control's display shows the correct channel for the paired receiver.
  • Make sure both the Remote control and Receiver are switched on.
  • If necessary, re-pair the remote and receiver following the instructions in the "Pairing" section.

Q: What should the duration of each dog training session be?

A: 10-15 minutes.

Q: What should I do if the dog training collar doesn't work?

A:

  • Check the power level of the Remote control and Receiver; recharge if low.
  • In vibrate or shock mode, ensure the intensity level is above 0.
  • Check if the Receiver is enabled; press the power switch button to activate it.
  • Check the channel; press the CH button to select the correct channel.
  • Re-pair the Remote control and Receiver.

7. Specifications

FeatureDetail
Product Dimension (Remote)190*50*25 MM
Product Dimension (Receiver)75*35*30 MM
Receiver's CasingIP67 waterproof
Remote's CasingNon-waterproof
Remote/Receiver's Battery3.7V/300mAh LIP
Charging VoltageDC 5V
Charging PortType-C
Remote/Receiver Charging Time2 hours
Wireless Power10mW
Operating Environment0-40℃
Remote Standby Time120 days
Receiver Standby Time45 days
Frequency433MHz

8. User Tips

  • First Charge: Always charge the device before its first use.
  • Focused Training: Eliminate one misbehavior or teach one obedience command at a time. Training too fast can confuse your pet.
  • Gradual Introduction: Before using the shock mode, always try vibration mode first.
  • Observe Reactions: Continuously observe your dog's reaction to ensure the training intensity is not too much.
  • Skin Health: Examine the contact area daily for signs of rash or soreness. If found, discontinue use until the skin has healed. Consult a veterinarian if the problem persists for more than 48 hours.
  • Collar Duration: Do not leave the collar on your dog for more than 12 hours per day (ideally within 6 hours).
  • Collar Fit: If your dog's hair is too long, ruffle it to the sides or use extended silicone caps to ensure the static electrodes reach the skin. In some cases, shaving a small area might be necessary.
  • Safety First: Do not attach dog leashes to this training collar. If a pull-cord is required, use a separate collar strap.
  • Prevent Misoperation: Toggle the ON/OFF button of the Remote Control to the locked position when not in use to prevent accidental activation.

9. Important Security Information

! WARNING

  • Do not use this product if your dog is aggressive or exhibits aggressive behavior frequently. Aggressive dogs can cause serious injury or death to their owners and others.
  • Always follow the manufacturer's directions. Incorrect use may result in damages or injuries.
  • Do not use the product near open flames or fragile objects.
  • Avoid using the product in extremely hot (above 40°C) or extremely cold (below 0°C) environments.
  • Do not charge this product with a charger exceeding 5 volts.
  • This product is not a toy and must be kept out of reach of children.
  • Unplug the product from the power supply if it will not be used for an extended period.
  • If the product stops working effectively due to a drop, damage, outside usage, or water infiltration, do not use it. It should be repaired by the manufacturer or its authorized service.
  • During dog training, ensure you and your dog remain in a safe range to prevent injury. The leash should be strong and long enough to keep the dog within a safe range and allow you to pull the dog if it runs off unexpectedly.

! CAUTIONS

  • The electrostatic current generated by the product is very low (0.01 amps), making it highly safe and unlikely to burn the dog's skin. However, ulcers can be caused by bacterial infection if the collar is worn improperly.
  • Wearing the collar too long or too tightly can cause discomfort, skin damage, and infection. Ensure the collar strap is worn properly and sensibly.
  • Use the electric shock function wisely and with patience. Always train your dog carefully. Shock mode should be the last choice.
  • Do not use the device on dogs less than three months old, weighing less than eight pounds, or those that are old, pregnant, easily scared, aggressive, or in heat, or in poor health.
  • Only correct one negative habit at a time. Training too many items at once may make your dog resistant.
  • Start with the vibration function before using electric shocks.
  • Do not leave the collar on your dog if the dog is alone or if you are not actively training.
  • It is forbidden to use the product in the presence of open flame or under extremely hot conditions.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the product packaging or contact the seller directly. Keep your purchase receipt as proof of purchase.

User Manual (PDF): A detailed user manual in PDF format is available for download. View User Manual (PDF)

© 2023 All Rights Reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.