Introduction
This manual provides essential information for the safe and effective installation and operation of your Fccemc 12V Car Brake Turn Signal Light LED Warning Lamp Strip. Please read all instructions carefully before use and retain this manual for future reference.
Safety & Warnings
Important Safety Information:
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not open or disassemble the product.
- Stop use and disconnect power if abnormal heat, flicker, or damage occurs.
- Professional installation is recommended.
- Install only when vehicle power is off.
- Do not use while driving until properly fitted.
- Comply with local road traffic regulations; do not use to replace mandatory original lamps.
- For off-road or auxiliary use only, not for road signaling without legal approval.
- Use original dedicated socket for connection; do not modify, cut, or splice wires.
Product Overview
The Fccemc 12V Car Brake Turn Signal Light LED Warning Lamp Strip is designed to enhance vehicle visibility and safety with multiple lighting functions. It features premium LED chips for splendid bright illumination without glares.
Key Features:
- Premium LED Chips: Provides bright and clear illumination.
- Multi-functional: Integrates Running Light, Right Turn Signal, Left Turn Signal, Double Flash Light, Reverse Light, and Brake Light.
- Easy Installation: Designed for plug-and-play setup with strong adhesive.
- Durable Design: Built to withstand automotive environments.
Functions:
The light strip offers 5 powerful functions:
- Running Light: Constant red illumination when headlights are on.
- Right Turn Signal: Amber light flashes to indicate a right turn.
- Left Turn Signal: Amber light flashes to indicate a left turn.
- Double Flash Light (Hazard Lights): Amber lights flash simultaneously.
- Reverse Light: White light illuminates when reversing.
- Brake Light: Bright red illumination when brakes are applied.
Setup & Installation
This product is designed for easy installation without drilling. Ensure you have read and understood all safety warnings before proceeding.
Components:
- LED Warning Lamp Strip
- Dedicated 4-pin connector
- Adhesive backing
Installation Steps:
- Prepare Vehicle: Turn off vehicle power completely before starting installation.
- Clean Surface: Ensure the mounting surface on your vehicle's rear is clean, dry, and free of debris.
- Position Strip: Carefully position the LED strip to determine the optimal placement.
- Apply Adhesive: Peel off the protective film from the adhesive backing of the LED strip. The strip comes with tough-as-nails adhesive enhancer for strong adhesion.
- Secure Strip: Firmly press the LED strip onto the desired surface.
- Locate Socket: Locate the pickup truck's dedicated 4-pin socket for the tail lights.
- Connect Wiring: Plug the dedicated 4-pin connector of the LED strip into the vehicle's socket until it is fully locked. Do not modify, cut, or splice wires.
Wiring Diagram:
The 4-pin connector typically has the following wire assignments:
| Pin/Wire Color | Function |
|---|---|
| Black | Ground (A) |
| White | Running Light (B) |
| Yellow | Left Turn Signal / Brake Light (C) |
| Green | Right Turn Signal / Brake Light (D) |
| Red | Reverse Light (E) |
Note: Always refer to your vehicle's specific wiring diagram to confirm pin assignments before connecting.
Operation
After successful installation, follow these steps to test and operate your light strip:
- Turn on Vehicle Power: Reconnect and turn on your vehicle's power.
- Test Functions: Test the lighting, steering (turn signals), brake, and reverse functions.
- Verify Operation: Ensure stable connection and normal lighting for all functions.
The light strip will automatically activate its corresponding function based on your vehicle's electrical signals.
Maintenance
The Fccemc LED Warning Lamp Strip requires minimal maintenance. To ensure longevity and optimal performance:
- Regularly inspect the strip for any physical damage or loose connections.
- Keep the light strip clean from dirt and debris using a soft, damp cloth. Avoid abrasive cleaners.
- Do not attempt to open or disassemble the product, as this will void any potential warranty and may cause damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light strip not illuminating or functions incorrectly. | Loose connection, incorrect wiring, vehicle power off, damaged strip. |
|
| Brake light flashes initially then stays solid. | This may be an intended feature of the product. |
|
| Turn signals and brake light cannot be used simultaneously or show incorrect colors. | Incorrect wiring, specific product design. |
|
| Abnormal heat or flickering. | Faulty connection, internal damage. |
|
Specifications
| Attribute | Detail |
|---|---|
| Product Name | Car Brake Turn Signal Light LED Warning Lamp Strip |
| Brand | Fccemc |
| Model | 1 |
| Item Type | Turn Signal |
| Voltage | 12 V DC |
| Wattage | 6W |
| Light Color | Red / Amber light |
| Available Lengths | 48 inch (120cm), 60 inch (150cm) |
| Suitable For | Most Pickup Trucks, Trailers, Cars, SUV, RV, VAN |
| Package Dimensions (L x W x H) | 18 cm x 16 cm x 2 cm |
| Package Weight | 0.195 kg |
| Origin | Mainland China |
User Tips
Based on feedback from other users, consider the following tips for a better experience:
- Verify Size: Always double-check the required length (48-inch or 60-inch) for your vehicle before purchasing to ensure a perfect fit.
- Understand Light Patterns: Familiarize yourself with the expected light patterns for each function (running, brake, turn, reverse, double flash) to avoid confusion during operation. Some brake lights may have an initial flash before staying solid.
- Confirm Wiring: Pay close attention to the wiring diagram and ensure all connections are made correctly. Incorrect wiring can lead to unexpected behavior or limited functionality, especially with combined turn signal and brake functions.
Frequently Asked Questions (FAQ)
- Q: Will this light strip fit most vehicles?
- A: Yes, it is suitable for most Pickup Trucks, Trailers, Cars, SUV, RV, and VAN.
- Q: Can the light strip be cut to adapt to the size of the vehicle?
- A: No, the manufacturer explicitly states not to modify, cut, or splice wires. Doing so may cause short circuits, fire, or vehicle failure, and will void any warranty.
- Q: Can I install this on the inside (rear windshield)?
- A: This product is designed for external automotive use, specifically as a rear tail light strip. Internal installation may not provide the intended visibility or comply with local road safety regulations for external vehicle lighting.
Warranty & Support
For detailed warranty information and further support, please refer to the official user manual PDF or contact Fccemc customer service.
Manufacturer: Guangzhou Zhengji Information Technology Co., Ltd
Address: Room 311, Building 2, Jiahe Creative Industry Park, Huangbian North Road, Baiyun District, Guangzhou City, Guangdong Province, China, 510440
Email: zj634216187@163.com
EU Authorized Representative: Apex CE Specialists GmbH, Grafenberger Allee 277, 40237 Dusseldorf, DE
EU Representative Email: Info@apex-ce.com
Full User Manual (PDF): A comprehensive PDF version of the user manual is available for download. View PDF Manual