Pampsee Turbofan LED Headlights

Contents

Pampsee Turbofan LED Headlight Bulb User Manual

Model: Turbofan LED Headlights

For H1, H4, H7, H8, H11, 9005 (HB3), 9006 (HB4) Socket Types

1. Introduction

The Pampsee Turbofan LED Headlight Bulb is an advanced automotive lighting solution designed to replace traditional halogen lamps. Utilizing green power source technology, these LED headlights offer superior performance, energy efficiency, and a longer lifespan. They are engineered for easy, lossless installation and provide a clear, soft, and powerful light output for enhanced visibility and safer driving.

Pampsee Turbofan LED Headlight Bulbs in packaging
Figure 1: Pampsee Turbofan LED Headlight Bulbs and packaging.

2. Specifications

Feature Specification
Brand Name Pampsee
Item Type Other
Wattage 110W/pair, 55W/bulb (Actual power is 90% of theoretical power)
Lumen 30000Lm/Set, 15000LM/bulb
Color Temperature 6000K Cold White
Voltage DC9-36V (Fit 12V/24V vehicle)
Car Model Compatibility Universal (For Alfa/Mitsubishi/Chevrolet/Renault/Fiat/VAZ/Great Wall/Suzuki, etc.)
Chip Assembly Type 3570 CSP Chip
Heat Dissipation Theory Aviation aluminum 6063, 12000RPM Fast Speed Cooling Fan
Operating Temperature -40~+85 degree Celsius
Lifespan Over 50,000 hours
Waterproof Rating IP68 Waterproof Design
Certification E-Mark, CE, FCC, RoHS, KC, pse, ECE
Warranty 1 year

2.1 Socket Models

  • High/Low Beam: H4
  • Single Beam: H1, H7, H8, H11, 9005 (HB3), 9006 (HB4)
Comparison of halogen and LED bulb types
Figure 2: Visual comparison of various halogen bulb types and their corresponding LED replacements, illustrating the 1:1 replacement design.

2.2 Dimensions

  • 9006/HB4: 1.5cm (width), 6.7cm (height), 4.1cm (base width)
  • H4/HB2/9003: 1.7cm (width), 7.9cm (height), 2.4cm (base width)
  • H7: 1.5cm (width), 6cm (height), 1.8cm (base width)
Dimensions for 9006/HB4 LED headlight bulb
Figure 3: Dimensional drawing for 9006/HB4 LED headlight bulb.
Dimensions for H4/HB2/9003 LED headlight bulb
Figure 4: Dimensional drawing for H4/HB2/9003 LED headlight bulb.
Dimensions for H7 LED headlight bulb
Figure 5: Dimensional drawing for H7 LED headlight bulb.

3. Package Contents

Each package contains:

  • 2 Pcs LED Headlight bulbs

4. Safety Information

Please read and understand all safety instructions before installing or using the LED headlights. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

  • Always wear appropriate personal protective equipment, such as safety glasses and gloves, during installation.
  • Ensure the vehicle's ignition is off and the battery is disconnected before beginning installation to prevent electrical hazards.
  • Avoid touching the LED chips directly, as oils from your skin can reduce their lifespan and performance.
  • Do not look directly into the illuminated LED bulb, as it can cause eye damage.
  • Keep the product out of reach of children.
  • If you are unsure about any part of the installation process, consult a qualified automotive technician.

5. Installation

The Pampsee Turbofan LED Headlight Bulbs are designed for a 1:1 replacement of original halogen lamps, offering a plug-and-play, lossless installation in approximately 10 minutes. The compact design ensures a perfect fit into most housing and factory sockets without modification.

5.1 Installation Steps

  1. Prepare the LED Headlight: Insert the M3 HEX nut into the designated null (recess) of the LED headlight.
  2. Attach the Fixed Plate: Select the proper fixed plate (component 3 in diagrams). Insert the LED headlight (component 1) into the fixed plate, ensuring the installation hole of the fixed plate aligns with the headlight's null.
  3. Secure the Assembly: Place the fixed nut (component 5) into the fixed plate's installation hole and align it with the M3 hex nut. Tighten securely.
  4. Install into Lamp-Chimney: Carefully replace the assembled LED headlight with the fixed plate into the original lamp-chimney of your vehicle. The connection method is the same as with the original halogen headlight.
  5. Connect Wiring: Connect the wiring of the LED headlight according to your vehicle's wiring diagram.
  6. Adjust and Finalize: Move the LED headlight forward and backward within the lamp-chimney to achieve the best light beam effect. Once the optimal position is found, fasten the fixed nut to secure it.
Video 1: Demonstration of LED headlight bulb installation and light pattern testing.

5.2 Installation Diagrams (Textual Description)

The installation process involves several components: the LED headlamp, original fixed spring, fixed plate, original reflectors, and fastening screw. The following describes the general steps illustrated in the product's installation diagrams:

  • Diagram 1: Shows the initial placement of the M3 HEX nut within the LED headlamp assembly.
  • Diagram 2: Illustrates how the LED headlamp is inserted into the fixed plate, ensuring proper alignment with the headlight's housing.
  • Diagram 3: Details the securing of the assembly using the fixed nut and M3 hex nut, tightening them to hold the bulb in place.
  • Diagram 4: Depicts the final step of placing the entire LED headlight assembly into the vehicle's lamp-chimney, emphasizing that the connection is similar to the original halogen setup.
  • Diagram 5 (Below Diagram): Provides an exploded view of the assembly sequence, showing the LED bulb, fixed plate, spring, and nut, and how they integrate into the reflector for a concentrated light output, mimicking the original halogen lamp's luminous point.
Diagram comparing LED and Halogen lamp luminous points
Figure 6: Comparison of LED headlamp and Halogen lamp luminous point, showing concentrated light.

6. Operation

Once installed, the LED headlights operate like your vehicle's original headlights. Turn on your vehicle's lighting system to activate the LED bulbs. Depending on your vehicle's controls and the bulb type installed (H4 for high/low beam, others for single beam), you can switch between low beam and high beam settings.

  • Low Beam: Provides a focused beam pattern designed to illuminate the road ahead without blinding oncoming drivers.
  • High Beam: Offers a wider and farther lighting range for maximum visibility when appropriate.
Standard light type design with focusing refraction surface
Figure 7: Standard light type design with focusing refraction surface to prevent glare.

7. Maintenance

Pampsee Turbofan LED Headlight Bulbs are designed for durability and long life, requiring minimal maintenance.

  • Cleaning: Periodically clean the headlight lenses with a soft, damp cloth to remove dirt and debris that may obstruct light output. Avoid abrasive cleaners.
  • Inspection: Regularly inspect the bulbs and wiring for any signs of damage or loose connections.
  • Cooling System: The integrated 12000 RPM cooling fan and aviation aluminum body ensure efficient heat dissipation. Ensure no obstructions block the airflow around the headlight assembly.

8. Troubleshooting

If you encounter issues with your LED headlights, refer to the following common problems and solutions:

Problem Possible Cause Solution
Headlight not turning on Loose connection, blown fuse, incorrect wiring, faulty bulb Check all connections, inspect vehicle fuses, verify wiring against diagram, test bulb with a known good power source.
Flickering or intermittent light Loose connection, CANbus incompatibility (though bulbs are CANbus ready for 99% vehicles), voltage fluctuations Ensure connections are secure. If flickering persists, a CANbus decoder might be needed for specific vehicle models (though generally not required). Check vehicle's electrical system.
Dim light output Dirty lens, improper alignment, power supply issue Clean headlight lens. Re-adjust bulb position for optimal beam pattern. Verify stable voltage supply.
Error message on dashboard CANbus system detecting lower power draw (common with LEDs) These bulbs are CANbus ready for 99% of vehicles. If an error occurs, a separate CANbus decoder may be required for your specific vehicle model.

9. User Tips

  • Beam Adjustment: After installation, take the time to properly aim your headlights. Incorrectly aimed headlights can reduce visibility and blind other drivers.
  • Verify Fitment: Although designed for 1:1 replacement, always double-check the socket type compatibility for your specific vehicle model before purchase and installation.
  • Cleanliness: Keep your headlight lenses clean. Even the brightest LEDs can be hampered by dirty or foggy lenses.
  • Professional Help: If you encounter persistent issues or are uncomfortable with DIY installation, seek assistance from a professional mechanic.

10. Warranty and Support

Pampsee Turbofan LED Headlight Bulbs come with a 1-Year Warranty from the date of purchase.

This warranty covers manufacturing defects and product malfunctions under normal use. It does not cover damage caused by improper installation, accident, misuse, abuse, unauthorized modifications, or natural disasters.

For warranty claims or technical support, please contact your retailer or the manufacturer directly. When contacting support, please have your purchase details and product information ready.

Note: No warranty is offered if there is any feedback less than 5 stars before communication regarding an issue. Please contact customer service to resolve any problems first.

If you have any questions or require assistance, please do not hesitate to contact us. We are committed to helping you resolve any problems.

© 2024 Pampsee. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.