Dobtian DM860H

Contents

Dobtian DM860H Stepper Motor Driver Instruction Manual

1. Product Overview

The Dobtian DM860H is a high-performance DSP digital microstep stepper motor driver designed for controlling 2-phase and 4-phase stepper motors (4-wire, 6-wire, and 8-wire configurations), specifically suitable for 57 and 86 type motors. It features advanced subdivision capabilities up to 128 microsteps, making it ideal for applications requiring high precision and smooth motion.

Key Features:

  • Common compatibility for 5V and 24V signals.
  • Wide power supply range: 24V-110V DC or 18V-80V AC.
  • H-bridge bipolar constant phase current drive.
  • Eight selectable output currents, up to 7.2A.
  • Fifteen microstep subdivision modes, up to 128 microsteps.
  • High-speed photoelectric isolation for input signals.
  • Standard single pulse interface.
  • Offline hold function.
  • Integrated large cooling fan for efficient heat dissipation.
  • Energy-saving semi-automatic current locking function.
  • Built-in temperature and overcurrent protection.

Video: Overview of the DM860H Stepper Motor Driver.

2. Specifications

AttributeValue
Model NumberDM860H
Brand NameDobtian
Motor TypeStepper Motor
Power Supply18V-80V AC / 24V-110V DC
Max Peak Current7.2A
Microstep Resolution400 to 25600 pulses/rev (selectable)
Current Settings2.00A to 6.00A (RMS) / 2.40A to 7.20A (Peak)
ColorBlue
OriginMainland China
CertificationCE
Wireless FunctionalityNo
Battery IncludedNo
High-concerned chemicalNone

3. Setup and Wiring

Carefully follow the wiring instructions to ensure proper functionality and prevent damage to the driver or motor.

Front view of DM860H driver showing terminal labels and DIP switch settings for current and microstep resolution.

Image: Front view of the DM860H driver with detailed labels for connections and settings.

3.1 Terminal Connections

  • Signal Input:
    • DIR-, DIR+: Direction signal input.
    • PUL-, PUL+: Pulse signal input.
    • ENA-, ENA+: Enable signal input.
  • Motor Output:
    • A+, A-: Motor phase A winding.
    • B+, B-: Motor phase B winding.
  • Power Input:
    • AC+, AC-: AC power input (18V-80V AC).
    • For DC power input (24V-110V DC), connect DC+ to AC+ and DC- to AC-.

3.2 DIP Switch Settings (SW1-SW8)

The DM860H driver features DIP switches for configuring output current and microstep resolution. Refer to the tables below and the product label for specific settings.

Current Table (SW1, SW2, SW3)

REF CurrentPK CurrentSW1SW2SW3
2.00A2.40Aononon
2.57A3.08Aoffonon
3.14A3.77Aonoffon
3.71A4.45Aoffoffon
4.28A5.14Aononoff
4.86A5.83Aoffonoff
5.43A6.52Aonoffoff
6.00A7.20Aoffoffoff

SW4: 'off' = Half Current, 'on' = Full Current.

Pulse/rev Table (SW5, SW6, SW7, SW8)

Pulse/revSW5SW6SW7SW8
400offononon
800onoffonon
1600offoffonon
3200ononoffon
6400offonoffon
12800onoffoffon
25600offoffoffon
1000onononoff
2000offononoff
4000onoffonoff
5000offoffonoff
8000ononoffoff
10000offonoffoff
20000onoffoffoff
25000offoffoffoff

4. Operating Instructions

Once the driver is correctly wired and configured, it is ready for operation. Ensure your control system (e.g., CNC controller) is properly connected to the signal inputs.

4.1 Power On/Off

  • Connect the power supply to the AC+/AC- terminals.
  • The PWR/FAULT indicator will light up upon successful power-on.
  • To power off, disconnect the power supply.

4.2 Motor Control

  • Send pulse signals (PUL+, PUL-) to control motor movement.
  • Send direction signals (DIR+, DIR-) to control motor rotation direction.
  • Use the enable signal (ENA+, ENA-) to activate or deactivate the motor driver. When disabled, the motor will be free-spinning.

5. Maintenance

The DM860H driver is designed for reliable operation with minimal maintenance. However, adhering to a few guidelines can prolong its lifespan and ensure optimal performance.

  • Cooling: The driver includes a large cooling fan. Ensure that the fan and heatsink fins are kept clear of dust and debris to maintain efficient heat dissipation. Adequate airflow around the unit is crucial.
  • Environment: Operate the driver in a clean, dry environment, free from excessive vibrations, corrosive gases, and extreme temperatures.
  • Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent operation or damage.
Side view of the DM860H driver showing the cooling fins and fan for heat dissipation.

Image: Side view highlighting the cooling fan and fins.

6. Troubleshooting

This section provides solutions to common issues you might encounter with the DM860H stepper motor driver.

6.1 PWR/FAULT Indicator

  • Indicator Off: Check the power supply connection and ensure it is within the specified voltage range (18V-80V AC or 24V-110V DC).
  • Indicator Blinking/Red: This typically indicates a fault condition such as overcurrent or over-temperature.

6.2 Common Issues and Solutions

  • Motor Not Moving:
    • Verify all wiring connections (power, motor, signal) are correct and secure.
    • Check if the enable signal (ENA) is active.
    • Ensure pulse signals (PUL) are being sent correctly from the controller.
    • Confirm the current settings (SW1-SW3) are appropriate for your motor.
  • Motor Moving Erratically or Vibrating:
    • Check motor wiring for incorrect phase connections.
    • Ensure microstep settings (SW5-SW8) are correctly configured and match your controller's output.
    • Adjust the current settings if the motor is overheating or lacking torque.
  • Motor Overheating:
    • Reduce the output current using SW1-SW3.
    • Ensure adequate ventilation around the driver and motor.
    • Check for mechanical binding in the motor's load.
  • Loss of Steps:
    • Increase the output current.
    • Reduce the motor's acceleration or maximum speed in your control software.
    • Ensure the power supply can provide sufficient current.

7. User Tips

Based on common user experiences, here are some tips for optimal use of your DM860H driver:

  • Start Conservatively: When first setting up, begin with lower current settings and gradually increase them until the motor performs as desired without excessive heat.
  • Match Microsteps: Ensure the microstep resolution set on the driver (SW5-SW8) precisely matches the pulse settings in your control software for accurate movement.
  • Signal Integrity: Use shielded cables for signal lines (PUL, DIR, ENA) to minimize electrical noise, especially in industrial environments.
  • Power Supply Sizing: Use a power supply with sufficient voltage and current capacity for your motor and driver combination. An undersized power supply can lead to poor performance.

8. Warranty and Support

For specific warranty details and technical support, please refer to the official documentation provided by the seller or contact the seller directly. A detailed user manual in PDF format may be available for further reference: View User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.