1. Introduction
The WELLMEET SP105E is a versatile Bluetooth and RF remote-controlled intelligent controller designed for full-color LED light strips. It supports a wide range of single-wire LED driver ICs and offers various lighting effects, including music and non-music patterns. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device.
2. Safety Precautions
To ensure safe operation and prevent damage, please observe the following precautions:
- This product should be installed and debugged by personnel with professional qualifications.
- The product is not waterproof. For outdoor installations, use a waterproof box to protect it from sunlight and rain.
- Ensure good heat dissipation conditions. Install the product in a well-ventilated environment to extend its service life.
- Do not install or use this product in areas with lightning, strong magnetic fields, or high voltage.
- Verify that the output voltage of the LED power supply matches the product's voltage range (DC 5V-24V).
- The diameter and size of the wires used must be sufficient to handle the load of the connected LED lighting fixtures. Ensure secure wiring to prevent accidents caused by heat or poor contact.
- Before powering on and debugging, confirm that all wiring is correct to avoid damage to the lighting fixtures due to wiring errors.

Important safety guidelines for installing the SP105E controller.
3. Package Contents
Upon opening your package, please ensure all items are present and in good condition:
- 1 x SP105E Magic Controller
- 1 x DC Power Connector Cable
- 1 x 4-Pin Connector Cable
- 1 x Small Screwdriver
- 1 x Instruction Manual (this document)

The SP105E controller, power cable, 4-pin connector, and screwdriver.
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | WM-SP105E |
| Brand Name | WELLMEET |
| Item Type | Dimmers |
| Material | Plastic |
| Working Temperature | -20°C ~ 60°C |
| Working Voltage | DC 5V ~ 24V |
| Working Current | 28mA ~ 40mA |
| Remote Distance | 20 Meters |
| Product Size | 85mm * 45mm * 22mm |
| Product Weight | 40g |
| Max. Load Power | 2048 pixels |
| Certification | CE, ROHS |
| Origin | Mainland China |
| Warranty | 1 year |
Supported IC Models:

The SP105E controller supports various single-wire LED driver ICs, including WS2811, WS2812B, WS2813, WS2815, WS2818, WS2801, SK6812, P943S, P9411, P9413, SM16703, UCS1903, TM1804, LPD6803, LPD8806, APA102, GS8206, GS8208, SK9822, and P9414.

Dimensions of the SP105E controller: 10cm (length) x 4.5cm (width) x 2cm (height).
5. Setup Guide
5.1 App Installation
The specialized App for the SP105E controller is available on both iOS and Android platforms. It supports Bluetooth 4.0 for communication.
- Apple Devices: Requires iOS 10.0 or higher (e.g., iPhone 4S, iPhone 5/5S/5C, iPhone 6/6S Plus, iPhone 6/6 Plus).
- Android Devices: Requires Android 4.4 or higher.
To download and install the App:
- Search for "Magic-LED" or "SceneX" in the App Store (for iOS) or Google Play (for Android).
- Alternatively, scan the QR codes below to directly download and install the App.

The instruction sheet showing QR codes for downloading the Magic-LED app for iOS and Android.
5.2 Wire Connection
Ensure the power supply is disconnected before making any connections. The SP105E controller operates on DC 5V-24V. Connect your LED light strip according to the diagram below:

Wiring diagram for connecting the SP105E controller to an LED light strip. Connect the DC 5-24V power supply to the VCC and GND terminals on the left. Connect the LED light strip's VCC, DAT, and GND to the corresponding terminals on the right side of the controller. The diagram shows four output channels (DAT1, DAT2, DAT3, DAT4) for multiple LED strips.
5.3 Connecting WS2811 or WS2812B LED Strip
Follow these steps to connect and set up your WS2811 or WS2812B LED strip:
- Connect the SP105E controller to your WS2811 or WS2812B LED strip as shown in the wiring diagram above. Ensure the power supply is connected to the controller.
- Download and install the Magic-LED app on your smartphone.
- After installation, open the app. It will scan for Bluetooth devices. Confirm your phone's Bluetooth is on and connected to the controller.
- Enter the settings page within the app.
- Set the total pixels for your LED strip (up to 2048 pixels).
- Set the R/G/B order and the correct IC type (e.g., WS2811).

Visual guide demonstrating how to connect the SP105E controller to an LED strip and configure it using the mobile app, including setting total pixels and IC type.
6. Operating Instructions
6.1 App Operations
The SP105E controller can be fully managed via the mobile App. Here’s how to use its main functions:
- Adding a Device: Open the App. Click the '+' button in the top right corner of the home page to add your SP105E controller. Once added, click on the device to enter the control page.
- Renaming Controller: Click the settings icon (gear) in the upper right corner to rename your controller for easier identification.
- Channel Control: The SP105E supports 4 distinct signal outputs. You can click on 'Channel 1' through 'Channel 4' to control each channel individually, or select 'All Channels' for unified control.
- Saving Scenes: After adjusting the lighting effects for each channel, click the save icon (floppy disk) in the upper right corner to save the current settings as a scene. The SP105E supports up to 9 scenes, which can be recalled from the App's scene page or via the RF remote control.
- Timing Events: Click the clock icon in the upper right corner to set up to five timing events. Note that all timing events will be deleted if the controller loses power.
- Effect Customization: On the effects page, explore various music and non-music effects. You can adjust parameters such as speed, brightness, effect length, and color for specific effects.
- Color Verification & Copy: On any single-channel page, click the upper right corner icon (two overlapping squares) to verify the color and copy the current channel's effect to another channel.
- Trigger Functions: The trigger page features four triggers, each with preset and dynamic effects. Click the switch icon (two arrows forming a circle) to toggle between preset and custom effects. Access the dynamic effect selection interface by clicking any trigger area. Confirm your selection with the upper right corner checkmark and cancel with the upper left corner 'X'. Long-press a trigger area to modify its name, lasting time, and associated channel.
- Grouping: On the grouping page, click the '+' button in the lower right corner to add groups. Select the channels to associate with the group and click 'OK'. The group page displays added groups, and clicking on a group allows you to control the effect mode of its associated channels.
A demonstration of the SP105E controller being controlled via the mobile app, showing color and effect changes on an LED strip.
6.2 RF Remote Functions
The SP105E also comes with an RF remote control for convenient operation. The remote allows control over basic functions and scene selection.

Diagram of the RF remote control for the SP105E, showing buttons for ON/OFF, Lock/Unlock, Speed+, Speed-, Brightness+, Brightness-, Scene Auto, and 9 Scenes.
Remote Button Functions:
- ON/OFF: Power on or off the controller.
- Lock/Unlock: Locks or unlocks the current lighting effect.
- Speed + / Speed -: Adjusts the speed of dynamic effects.
- Brightness + / Brightness -: Adjusts the brightness of the lights.
- Scene Auto: Cycles through the saved scenes automatically.
- 1-9 Buttons: Directly selects one of the 9 pre-saved scenes.
7. Maintenance
To ensure the longevity and optimal performance of your SP105E controller, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the controller. Do not use harsh chemicals or abrasive cleaners.
- Environment: Keep the controller in a dry, well-ventilated area, away from direct sunlight, extreme temperatures, and high humidity.
- Power Supply: Always use a stable DC 5V-24V power supply that meets the product's specifications.
- Wiring: Periodically check all wire connections to ensure they are secure and free from damage.
- Storage: If storing the controller for an extended period, disconnect it from the power supply and store it in a cool, dry place.
8. Troubleshooting
If you encounter issues with your SP105E controller, refer to the following common problems and solutions:
- Controller not powering on:
- Check if the power supply is correctly connected and providing the correct voltage (DC 5V-24V).
- Ensure the power adapter is functional.
- LED strip not lighting up or incorrect colors:
- Verify that the LED strip is correctly wired to the controller (VCC, DAT, GND).
- Confirm that the correct IC model and total pixel count are set in the App.
- Check the R/G/B order setting in the App.
- Ensure the LED strip itself is functional.
- App cannot connect to the controller:
- Make sure your smartphone's Bluetooth is enabled.
- Ensure the controller is powered on.
- Try restarting the App and the controller.
- Check if your phone's operating system meets the minimum requirements (iOS 10.0+ or Android 4.4+).
- RF remote not working:
- Ensure the remote has working batteries.
- Check for any obstructions between the remote and the controller.
9. User Tips
Based on user feedback, here are some tips for a smooth experience with your SP105E controller:
- The controller is generally easy to set up and often works correctly on the first try.
- The companion mobile app is user-friendly and integrates seamlessly with the controller.
- Always double-check your wiring before powering on to prevent any potential issues.
10. Warranty and Support
WELLMEET provides comprehensive after-sales service for its LED controller products, including lifelong technical support and warranty services.
Free Warranty:
If any quality issues occur within two years from the date of purchase, WELLMEET will provide free repair or service replacement.
Paid Warranty:
Products that exceed the free warranty period will be charged a certain cost for repair materials.
Exclusions from Free Warranty:
The following situations are not covered under free warranty or replacement services:
- Damage caused by excessive voltage, overload, improper operation, etc.
- Any wiring errors, water immersion (for non-waterproof products), and unauthorized repairs.
- Serious damage or deformation to the appearance caused by transportation or knocking.
- Product appearance is severely damaged or deformed.
- Damage caused by natural disasters and uncontrollable human factors, such as earthquakes, floods, fires, etc.
Repair and Replacement Process:
- WELLMEET's maximum responsibility for factory products is to replace them with products of the same model and quantity.
- To expedite the repair or replacement process, please provide details of the fault, operating environment, and actions taken when the fault occurred.
- Upon receiving the returned product and initial accessories, WELLMEET will repair or replace them for the customer. The logistics cost of the return will be borne by the customer.

Details on warranty coverage, exclusions, and the process for repairs and replacements.
For further assistance or technical support, please refer to the official WELLMEET website or contact their customer service.
A PDF version of the user manual is available for download: View User Manual (PDF)
