RUOSHUI 04S

Contents

RUOSHUI 04S Digital Process Calibrator User Manual

Model: 04S | Brand: RUOSHUI

1. Introduction

The RUOSHUI 04S is a highly advanced and versatile digital process calibrator. It is engineered to provide precise voltage and current output, serving as an essential tool for analog transmitter calibration, process control, and general multimeter functions. With its high basic accuracy of 0.05% and user-friendly interface, the 04S is suitable for a wide range of professional applications requiring reliable measurement and sourcing capabilities.

2. Product Overview

Familiarize yourself with the components and controls of your RUOSHUI 04S calibrator.

RUOSHUI 04S Calibrator with labeled controls
Figure 2.1: RUOSHUI 04S Digital Process Calibrator - Front Panel Layout
  • LCD Display: Shows output values, units, and status indicators.
  • Power Switch Button: Turns the device ON/OFF.
  • ON/OFF Button: Specific button for toggling output.
  • Function Selection Buttons (V, mA, mA%): Selects the desired output mode (Voltage, Current, Current Percentage).
  • Zero and Full Point Setting Buttons: Used for calibration and setting output range limits.
  • 25% Single Step Setting Button: Quickly sets output to 25% of the full scale.
  • Output Bit Selection Button: Adjusts which digit of the output value is being modified.
  • Output Value Setting Buttons (Up/Down Arrows): Increases or decreases the output value.
  • Input/Output Terminals (+mA, -XMT, -V): Connect test leads for current and voltage sourcing. Max 30V.
RUOSHUI 04S Calibrator dimensions and features
Figure 2.2: Calibrator Dimensions, Battery Compartment, Pen Tray, and Bracket
  • Battery Compartment: Located at the rear for battery installation.
  • Pen Tray: Convenient storage for test leads.
  • Bracket: Integrated kickstand for hands-free operation.

3. Key Features

  • High Precision: Basic accuracy of 0.05% for reliable measurements and outputs.
  • Multi-functionality: Capable of voltage output, active/passive current output, and analog transmitter simulation.
  • Digital Screen: Large, clear LCD display with digital symbols for easy reading, even with backlight.
  • User-Friendly Operation: Humanized key design ensures simple and fast operation.
  • Automatic Shut-down: Conserves battery life.
  • CE Certified: Meets European safety and quality standards.

4. Specifications

Detailed technical specifications for the RUOSHUI 04S Calibrator:

RUOSHUI 04S Calibrator detailed specifications table
Figure 4.1: Detailed Specifications Table
OutputRangeOutput RangeResolutionAccuracy
DCV10V0.000 ~ 11.000V0.001V0.05%+2
DCA20mA0.000 ~ 22.000mA0.001mA0.05%+4uA
Analog transmitter-20mA0.000 ~ 22.000mA0.001mA0.05%+4uA
Loop power24V±10%

General Specifications:

  • Powered by: Alkaline battery 1.5V * 2 (AA batteries)
  • Power consumption: About 400mA/3V, with 1kΩ load and under the condition of outputting 20mA
  • Max voltage: 30V (between each terminal and each terminal to ground)
  • Operating temperature: 0°C ~ 50°C
  • Operating humidity: ≤80%RH
  • Storage temperature: -10°C ~ 55°C
  • Storage humidity: ≤90%RH
  • Temperature Coefficient: 0.1 * (Specify the precision)%/°C
  • Size: 180 * 90 * 47mm
  • Weight: 500g

5. Package Contents

Upon opening your RUOSHUI 04S package, please verify that all the following items are included:

RUOSHUI 04S Calibrator packaging accessories
Figure 5.1: Packaging Accessories
  1. Product box
  2. Process Calibrator (RUOSHUI 04S unit)
  3. Test leads (red and black)
  4. Alligator clips
  5. Product Manual (this document)
  6. Fuses
  7. Instrument package (carrying case)

6. Setup

6.1 Battery Installation

The RUOSHUI 04S requires two 1.5V AA alkaline batteries (not included) for operation.

  1. Locate the battery compartment on the back of the calibrator.
  2. Open the battery compartment cover.
  3. Insert two AA alkaline batteries, ensuring correct polarity (+ and -).
  4. Close the battery compartment cover securely.
Battery installation diagram for RUOSHUI 04S Calibrator
Figure 6.1: Battery Installation

6.2 Connecting Test Leads

Connect the test leads to the appropriate input/output terminals at the bottom of the calibrator.

  • For current output, connect to the "+mA" and "-XMT" terminals.
  • For voltage output, connect to the "-XMT" and "-V" terminals.
  • Ensure connections are firm and secure.
Close-up of test lead jack design on RUOSHUI 04S Calibrator
Figure 6.2: Test Lead Jack Design

7. Operating Instructions

7.1 Power On/Off

  • Press the green power switch button (Power button icon) to turn the calibrator on. The LCD display will light up.
  • To turn off, press and hold the green power switch button until the display turns off.

7.2 Function Selection

Use the dedicated function selection buttons to choose your desired output mode:

  • Press V for Voltage output.
  • Press mA for Current (mA) output.
  • Press mA% for Current Percentage output.

7.3 Setting Output Values

Once a function is selected, use the arrow buttons to adjust the output value:

  • Use the Up/Down Arrow buttons to increase or decrease the output value.
  • Use the Left/Right Arrow buttons (Output Bit Selection) to select which digit you want to adjust for faster setting.
  • For quick current settings, use the mA 25% and mA 100% buttons to set the output to 25% or 100% of the full scale respectively.

7.4 Zero and Full Point Setting

Refer to the detailed instructions in the full product manual for specific procedures on setting zero and full points for calibration, as this may vary depending on the application.

8. Maintenance

8.1 Battery Replacement

When the battery indicator on the LCD display shows low power, replace the batteries promptly to ensure accurate operation. Follow the steps in Section 6.1 for battery installation.

8.2 Cleaning

Wipe the calibrator with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the casing or display. Ensure the device is off and disconnected from any circuits before cleaning.

8.3 Fuse Replacement

The calibrator is equipped with internal fuses for protection. If the device fails to power on or function correctly after battery replacement, the fuse may need to be checked and replaced. This procedure should ideally be performed by qualified personnel. Refer to the full product manual for fuse specifications and replacement instructions.

9. Troubleshooting

If you encounter issues with your RUOSHUI 04S Calibrator, please refer to the following basic troubleshooting steps:

  • Device does not power on:
    • Check if batteries are installed correctly and have sufficient charge. Replace if necessary.
    • Ensure the power button is pressed firmly.
  • Incorrect output readings:
    • Verify that the correct function (V, mA, mA%) is selected.
    • Check test lead connections for proper contact.
    • Ensure the device being tested is correctly connected and functioning.
    • Consider recalibrating the zero and full points if accuracy issues persist.
  • Display is dim or unreadable:
    • Replace batteries.
    • Check ambient lighting conditions.

For more complex issues, please consult the comprehensive product manual or contact customer support.

10. User Tips

No specific user tips were available from reviews or Q&A for this product. However, general tips for using precision calibrators include:

  • Always ensure the calibrator is powered off before connecting or disconnecting test leads to prevent accidental shorts or damage.
  • Store the calibrator in its instrument package when not in use to protect it from dust and physical damage.
  • Regularly check battery levels, especially before critical measurements, to avoid interruptions.
  • Keep the display clean for optimal readability.

11. Warranty and Support

For information regarding warranty coverage, technical support, or service, please refer to the official RUOSHUI website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.