1. Product Overview
1.1 Key Features
- Hall-effect joysticks (zero dead zone)
- Mechanical micro-switches for face/shoulder buttons
- Short-travel mechanical triggers
- Built-in gyroscope for motion control
- Dual vibration motors
- RGB LED indicator
- Type-C fast charging
- 3 connection modes: X-Mode (Android/iOS/Windows), S-Mode (Switch), P-Mode (PS4)
1.2 Compatibility
- Android 9.0+
- iOS 13.0+
- Windows 10+
- Nintendo Switch
- PlayStation 4
Bluetooth: 5.0 | Range: ≤8m
1.3 Package Contents
- ShanWan Q38 Controller × 1
- Type-C charging cable (1m) × 1
- User manual × 1

Figure 1: ShanWan Q38 Controller - Flat pocket handle design for portability.
2. Button Layout
Familiarize yourself with the controller's buttons and ports:
- Front: D-pad, X/Y/B/A buttons, Left/Right Joysticks (L3/R3 press function), O Button, -/View button, +/Menu (Home) button.
- Top: L, L2, R, R2 shoulder/trigger buttons.
- Bottom: Type-C charging port, Pair/Power button, Mode switch (X/S/P), Reset hole.

Figure 2: Close-up of the composite micro buttons (X, Y, B, A) designed for quick finger protection during gameplay.

Figure 3: Exploded view of the composite micro-moving suspension cross button design, showing the hanging part, elastic silicone, and micro switch components.
3. Setup
3.1 Power & Charging
- Power On: Press and hold the Pair/Power button for 2 seconds.
- Power Off: Press and hold the Pair/Power button for 3 seconds.
- Auto Sleep: The controller will enter sleep mode after 15 minutes of inactivity. Press any button to wake it up.
- Charging:
- Connect the Type-C charging cable to the controller and a 5V/0.5A+ adapter.
- The LED will slow flash while charging.
- The LED will become solid when fully charged.
Battery Specifications: 500mAh | Playtime: > 10 hours | Full Charge Time: ~2 hours
3.2 Mode Switch & Connection
The ShanWan Q38 supports three connection modes: X-Mode, S-Mode, and P-Mode. Use the mode switch on the bottom of the controller to select the desired mode.
3.2.1 X-Mode (Android / iOS / Windows)
- Slide the mode switch to X.
- Press and hold the Pair/Power button. The LED will flash blue rapidly.
- On your device (Android phone, iPhone, PC), search for Bluetooth devices and select