Introduction
This manual provides detailed instructions for the 1.54-inch TFT LCD Capacitive Touch Screen Module. This module features a 240x240 resolution IPS full-view display with an ST7789 driver and a capacitive touch panel utilizing a CST816D driver. Designed for ease of integration, both the SPI display interface and IIC touch interface are combined on a single 14-pin Flexible Printed Circuit (FPC) line, simplifying design and assembly processes.
The display is available with either a flat or 2.5D curved cover lens, with the 2.5D curved surface being the default option. Basic driver routines for common microcontrollers and adapter boards are provided to facilitate rapid development and integration into your projects.
Setup and Connection
Before connecting the display module, ensure your development environment is prepared and power is disconnected from all components.
Pin Definition
The module uses a 14-pin FPC connector. Refer to the pin definition table below for proper wiring:
Figure 1: Pin Definition Table and FPC Connector Layout.
| PIN NO | Symbol | Description |
|---|---|---|
| 1 | LEDA | Backlight LED anode power input |
| 2 | GND | Power Ground |
| 3 | IOVCC | Logic I/O interface power supply (1.8-3.3V) |
| 4 | VDD | Analog power supply (2.5-3.3V) |
| 5 | LCD-DATA | SPI serial data input/output signal |
| 6 | LCD-DC | Command data selection pin (DC=1 Data, DC=0 Command) |
| 7 | LCD-SCK | Display Panel SPI serial clock signal |
| 8 | LCD-CS | Display Panel Chip selection pin |
| 9 | LCD-RES | Display Panel RESET PIN |
| 10 | CTP-RST | Capacitive Touch RESET PIN |
| 11 | CTP-SCL | Capacitive Touch IIC interface serial clock signal pin |
| 12 | CTP-SDA | Capacitive Touch IIC interface serial data input/output pin |
| 13 | CTP-INT | Capacitive Touch interrupt signal |
| 14 | GND | Power Ground |
Connection Guidelines
- Connect the 14-pin FPC of the display module to your adapter board or microcontroller using a compatible P0.5 pitch ZIF plug-in connector.
- Ensure the power supply for IOVCC is within 1.8V-3.3V and VDD is within 2.5V-3.3V. The backlight LED anode (LEDA) will also require appropriate power.
- Utilize the provided microcontroller basic driver routines to initialize the ST7789 display controller via the SPI interface and the CST816D touch controller via the IIC interface.
- Verify all connections are secure to prevent damage or malfunction.
Operating Instructions
Display Functionality
The 1.54-inch TFT LCD provides a clear, vibrant display with a 240x240 resolution and IPS full-view angle, ensuring excellent visibility from various perspectives. The ST7789 driver IC manages the display operations.
Figure 2: Example display of data on the 1.54-inch TFT LCD.
Capacitive Touch Operation
The integrated capacitive touch screen, driven by the CST816D IC, allows for intuitive user interaction. It supports multi-touch gestures depending on the software implementation. The touch interface communicates via IIC.
Video 1: Demonstration of the 1.54-inch capacitive touch screen's responsiveness and UI navigation.
The video demonstrates the smooth and responsive nature of the capacitive touch, allowing users to navigate menus, input text, and interact with graphical elements effectively.
Maintenance
General Care
- Avoid applying excessive pressure to the display surface, as this can damage the LCD panel or touch sensor.
- Keep the module away from direct sunlight, high humidity, and extreme temperatures (outside -20°C to +65°C).
- Handle the FPC connector with care to prevent bending or tearing.
Cleaning
To clean the display surface:
- Power off the device before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a specialized screen cleaner.
- Gently wipe the screen. Avoid harsh chemicals, abrasive materials, or excessive moisture.
Troubleshooting
No Display / Blank Screen
- Check Power: Ensure the module is receiving the correct operating voltages (IOVCC 1.8-3.3V, VDD 2.5-3.3V, and LEDA for backlight).
- Check Connections: Verify that the FPC cable is correctly and securely seated in its connector.
- Software Initialization: Confirm that your microcontroller code correctly initializes the ST7789 display driver via SPI.
Unresponsive Touch Screen
- Check Connections: Ensure the FPC connection is secure, as both display and touch share the same FPC.
- Software Initialization: Verify that the CST816D touch driver is correctly initialized and polled via the IIC interface in your code.
- Physical Obstructions: Ensure there are no foreign objects or debris on the touch surface.
Incorrect Colors or Graphics
- Driver Configuration: Double-check the ST7789 driver configuration, especially color depth (65k/262k colors) and display orientation settings.
- Data Transmission: Verify the SPI data transmission integrity from your microcontroller to the display.
Specifications
| Feature | Detail |
|---|---|
| Product Name | TFT-LCD Model |
| Model Number | FT6236GSPI |
| Brand Name | ETAxopowo |
| Display Size | 1.54 inches (27.72 x 27.72 mm active area) |
| Resolution | 240 (RGB) x 240 dot matrix |
| Display Driver IC | ST7789 |
| Touch Driver IC | CST816D |
| Color Mode | 65k/262k colors |
| Working Voltage | IOVCC: 1.8V-3.3V, VDD: 2.5V-3.3V |
| Dimensions (LCM) | 51.52 (W) x 33.72 (H) x 2.05 (T) mm |
| Dimensions (CTP) | 34.4 (W) x 41 (H) x 3.73 (T) mm |
| Display Angle | IPS full view angle |
| Display Interface | SPI serial port 4-wire / Dual SPI |
| Touch Interface | IIC |
| Connection Method | P0.5 pitch ZIF plug-in |
| Working Temperature | -20°C to +65°C |
| Package Dimensions | 15 cm (L) x 10 cm (W) x 4 cm (H) |
| Package Weight | 0.1 kg |
Figure 3: Detailed dimensional drawing of the display module.
Figure 4: Key dimensions of the display module.
User Tips
- Simplified Integration: The combined SPI and IIC interfaces on a single FPC line significantly reduce wiring complexity and potential points of failure, making it easier for rapid prototyping and product development.
- Development Support: Leverage the provided microcontroller basic driver routines and adapter boards to accelerate your development process. These resources are designed to help you quickly get the display and touch functionality working.
- Optimal Viewing: The IPS full-view angle ensures that the display remains clear and readable from almost any angle, which is beneficial for devices where the user's viewing position may vary.
Warranty and Support
For detailed technical support, additional documentation, or warranty inquiries, please contact the manufacturer or seller directly. A comprehensive user manual in PDF format is also available for download, which may contain more in-depth technical details and advanced usage scenarios.
You can access the official PDF user manual here.