wenzhi MTG075-ZB-RL, MTG076-WF-RL, MTG275-ZB-RL, MTG276-WF-RL

Contents

Wenzhi ZigBee/Wifi Motion MmWave Presence Sensor

Models: MTG075-ZB-RL, MTG076-WF-RL, MTG275-ZB-RL, MTG276-WF-RL

User Instruction Manual

1. Introduction

The Wenzhi ZigBee/Wifi Motion MmWave Presence Sensor is an advanced smart device designed for human presence detection, micro-motion sensing, and illumination detection. It integrates a 16A relay for direct control of lighting or other electrical loads, making it ideal for home automation and DIY smart home projects. This sensor supports both ZigBee and Wi-Fi connectivity, offering flexibility for various smart home ecosystems.

2. Safety Information

  • Ensure power is OFF before installation or wiring to prevent electric shock.
  • Installation should be performed by a qualified electrician or in accordance with local electrical codes.
  • Do not expose the device to water or extreme humidity.
  • Do not attempt to disassemble or repair the device yourself.
  • Use only within the specified voltage range (AC85-265V).

3. Package Contents

  • Wenzhi MmWave Presence Sensor
  • Expansion Screws and Wall Plugs
  • Self-adhesive pad
  • User Manual (this document, or refer to the PDF: View PDF Manual)

4. Specifications

ParameterDescription
ModelsZigBee: MTG075-ZB-RL (2.4GHz), MTG275-ZB-RL (5.8GHz)
Wi-Fi: MTG076-WF-RL (2.4GHz), MTG276-WF-RL (5.8GHz)
Size105mm x 28mm (4.13in x 1.1in)
ColorWhite
WeightApprox. 120g (with packaging)
Beam Angle120°x120° (5.8GHz), 115°x115° (2.4GHz)
Ceiling Detection RadiusPresence: 2.5-3m (5.8GHz), 2-3m (2.4GHz)
Motion: 4-4.5m (5.8GHz), 4-5.5m (2.4GHz)
Sensitivity0-9 (Default 7)
Installation HeightTypical 2.7-3.5m
Sense Distance0-10m (Default 6m for 5.8GHz), 0.3-10m (Default 6m for 2.4GHz)
Departure Delay0.5s-25 min (Recommended ≥ 15s)
Beam (Illumination)0-500 lux
System Frequency5.8GHz ±75 MHz ISM wave, 2.4GHz ±125 MHz ISM wave
Transmitting Power10dBm (5.8GHz), 3-5 dBm (2.4GHz)
NetworkZigBee3.0 / Wi-Fi (2.4GHz) / BLE
Input PowerAC85-265V
Power Consumption<2W
Working Temperature-10°C to +50°C
Storage Temperature-20°C to +65°C
Working Humidity5-90% RH (Non-condensing)
Relay LoadResistive loads ≤3000W / LED ≤300W

5. Setup and Installation

5.1. Installation Method

The sensor is designed for ceiling or wall mounting. Optimal performance is achieved when installed at a height of 2.7-3.5m.

  1. Using Expansion Screws:
    • Drill two holes with a diameter of 6mm and a depth of 35mm.
    • The spacing between the holes should be 60mm.
    • Insert the wall plugs and secure the sensor with the provided screws.
  2. Using Self-Adhesive:
    • Clean the mounting surface thoroughly.
    • Apply the adhesive pad to the back of the sensor.
    • Firmly press the sensor onto the desired ceiling or wall location.
  3. Final Step: After connecting to the network (see 5.3), cover the sensor panel by screwing it clockwise until secure.

5.2. Wiring Diagram

Always ensure power is OFF before wiring. The sensor requires Live (L) and Neutral (N) connections. An optional light fixture can be connected directly to the sensor's relay.

Wiring Diagram for Wenzhi Presence Sensor

Image Description: A white circular sensor with wiring connections. 'L' (Live, red wire) and 'N' (Neutral, blue wire) are shown connecting to the sensor. An optional light bulb (orange icon) is shown connected between the 'L' and 'N' lines, indicating the sensor's relay can switch the light. Input voltage is AC85-265V.

  • Connect the Live (L) wire to the 'L' terminal.
  • Connect the Neutral (N) wire to the 'N' terminal.
  • For relay control: Connect your light fixture or appliance between the 'L' and 'N' terminals of the sensor, as shown in the diagram. The sensor's internal relay will switch the power to this load.
  • If used as a sensor only (without relay control): Only connect the Live (L) and Neutral (N) wires to power the device.

5.3. Network Connection (Tuya/Smart Life App)

The sensor integrates with the Tuya Smart Life app for configuration and control.

  1. App Installation: Download the "Tuya Smart" or "Smart Life" app from your smartphone's app store. Register or log in to your account.
  2. Power On: After wiring, power on the sensor. The red and blue indicator lights will illuminate for 2-5 seconds, then turn off for 2 seconds. The sensor will automatically enter network connection mode for 2 minutes. The blue indicator light will flash quickly (0.5 seconds per time).
  3. Add Device in App: Open the Tuya Smart/Smart Life app. Tap the "+" symbol in the upper right corner and select "Add Device". The app will search for nearby devices.
  4. Pairing: Once the sensor is discovered, tap "Add". For ZigBee versions, ensure you have a ZigBee hub connected to your network and the app. The sensor will connect to the hub.
  5. Confirmation: After successful addition, the device's blue indicator light will remain on for 10 seconds and then turn off, indicating a successful connection.
  6. Troubleshooting Connection: If connection fails, power cycle the sensor or press and hold the network connection button (usually a small button on the device) for more than 3 seconds to re-enter pairing mode.

5.4. ZigBee2MQTT Integration

For advanced users, this sensor can be integrated with ZigBee2MQTT:

  • Ensure your ZigBee2MQTT instance is updated to the latest version.
  • If you encounter issues, you may need to download and configure the specific JS file from the official Wenzhi ZigBee2MQTT GitHub repository: Wenzhi-ZigBee2mqtt GitHub.
  • It is recommended to set the "Distance report mode" to "occupation detection" within ZigBee2MQTT to optimize information reporting.

6. Operating Instructions

All operational parameters and settings are managed through the Tuya Smart Life app.

6.1. Detection Range and Coverage

The sensor uses mmWave radar for highly accurate detection of human presence, micro-motion, and static presence.

Functional Detection Sensor with More Accuracy

Image Description: Four scenarios illustrating the sensor's detection capabilities: "Sleeping" (static presence), "Talking" (micro-motion), "Lie down" (static presence), and "Blinking" (micro-motion). This highlights its ability to detect subtle human activities.

  • Micro Motion Detection Area: Detects subtle movements (e.g., head tilting, hand waving, reading, blinking) and larger movements (walking, jogging).
  • Presence/Breath Detection Area: Detects human body in static states (e.g., standing still, sitting still).
  • Ceiling Mounted Coverage:
    • 2.4GHz Module: Presence Radius 2-3m, Motion Radius 4-4.5m.
    • 5.8GHz Module: Presence Radius 2.5-3m, Motion Radius 4-5.5m.

6.2. Parameter Settings (via Tuya Smart Life App)

Access the device interface in the app to configure various parameters:

mmWave Radar Detection App Settings

Image Description: A smartphone screen showing the Tuya app interface for the presence sensor. It displays various adjustable parameters under "Common parameter" (Sensitivity, Departure delay, Detection range) and "Auxiliary parameter" (Entry sensitivity, Entry filter time, Entry distance indentation, Shield range, Block time).

Common Parameters:

  • Sensitivity (0-9, Default 7): Adjusts the detection threshold for object energy.
  • Departure Delay (0-1500s, Default 15s): Configures the confirmation time after a target disappears. Longer delays reduce false positives.
  • Detection Range (0-10m, Default 6m): Sets the maximum distance the sensor will detect.

Auxiliary Parameters:

  • Entry Sensitivity (0-9, Default 7): Threshold for initial target entry, filters accidental contact.
  • Entry Filter Time (0-5s, Default 0.1s): Filters accidental contact interference upon entry.
  • Entry Distance Indentation (0-10.00m, Default 0.6m): Indents detection distance inward to avoid edge interference.
  • Shield Range (0-10.00m, Default 0m): Sets the nearest distance for detection. Must be less than Detection Range.
  • Block Time (0.1-255.0s, Default 2.5s): Time required before a target can be detected again after switching from manned to unmanned mode.

6.3. Control Parameters (Relay Modes and Illumination)

Three Relay Breaker Modes App Settings

Image Description: A smartphone screen showing the Tuya app interface for "Control parameters" including Status indication, Sensor state, Breaker mode, Breaker status, Breaker polarity, and Illumin threshold. Text describes the three relay modes: Standard (cloud linkage), Local (automatic), and Not support (sensor only).

  • Status Indication (Silence/Instructions): Controls whether the indicator light flashes upon human presence detection.
  • Sensor (Turn On/Off/Manned/Unmanned): Sets the radar sensor's operational state.
  • Breaker Mode:
    • Standard (Cloud Linkage): Relay can be remotely controlled via the app.
    • Local (Automatic): Relay automatically turns on when presence is detected and off when no presence is detected.
    • Not Support: Disables the relay; the device functions only as a sensor.
  • Breaker Status (Turn On/Off): In Standard mode, allows remote control of the relay.
  • Illumin Threshold (0-500.00Lux): Used in Local (Automatic) mode. If the actual luminance is below this threshold, the local mode operates normally. If above, the relay remains closed regardless of presence.

7. Maintenance

  • Cleaning: Wipe the sensor's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Firmware Updates: Periodically check the Tuya Smart Life app for available firmware updates to ensure optimal performance and security.
  • Environmental Conditions: Ensure the sensor is not exposed to extreme temperatures, direct sunlight, or high humidity, which can affect its lifespan and performance.

8. Troubleshooting

8.1. Common Interference Sources & Solutions

  • False Triggers from Fans/AC: Reposition the sensor or fan/AC unit so they are not in the presence detection area.
  • Interference from Rolling Shutters/Exhaust Fans: Adjust detection range to filter out interference. Ensure exhaust fans are fixed to avoid ceiling vibration.
  • Strong 5.8GHz WiFi Signal Interference: Install WiFi routers at least 3m away from the sensor (front area) or 1.5m away (other directions). APs should be at least 1.5m away.
  • Air Flow (Wind): Adjust sensor sensitivity settings.
  • Animals: Adjust sensitivity and Entry Distance Indentation to minimize detection of pets.
  • Low Frequency Vibration: Avoid direct exposure to radar signals from sound/vibration sources. Set a lower sensitivity and longer Entry Filter Time.

8.2. General Issues

  • Sensor Not Detecting:
    • Check power supply.
    • Verify sensitivity and detection range settings in the app.
    • Ensure no physical obstructions are blocking the sensor's field of view.
  • Sensor Constantly Triggering:
    • Adjust sensitivity to a lower value.
    • Increase Departure Delay.
    • Check for interference sources as listed above.
  • Cannot Connect to Network:
    • Ensure your Wi-Fi network is 2.4GHz (if using Wi-Fi version).
    • Verify correct Wi-Fi password.
    • For ZigBee version, ensure ZigBee hub is powered on and connected to the network.
    • Reset the sensor to pairing mode (power cycle or hold network button).

9. User Tips

  • For ZigBee Models: A ZigBee hub (e.g., Tuya ZigBee Gateway) is required for these models to function and connect to your smart home system.
  • Static Presence Detection: While highly accurate, extremely prolonged periods of absolute stillness (e.g., reading a book without any movement, watching TV completely still) might occasionally lead to the sensor reporting no presence. Adjusting sensitivity and departure delay can help optimize this.
  • Wiring Standard LED Bulbs: Standard LED bulbs can be directly connected to the sensor's relay terminals (L and N) as shown in the wiring diagram. Ensure the total wattage does not exceed 300W for LED loads.
  • ZigBee2MQTT Users: This sensor is reported to work well with ZigBee2MQTT, offering extensive configuration options. Refer to the official GitHub for specific device handlers if needed.

10. Warranty and Support

For warranty information, technical support, or further inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

© 2024 Wenzhi. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.