Tuya zigbee water sensor

Contents

Tuya Zigbee Water Immersion Sensor User Manual

Model: zigbee water sensor | Brand: Tuya

1. Introduction

The Zigbee Water Immersion Sensor is a device designed to detect water overflow in its immediate environment. It requires connection to a Zigbee gateway for operation. With high detection sensitivity, it can detect water levels above 0.5mm and send real-time alarm messages to your mobile phone application, providing timely alerts for potential water damage.

2. Packing List

  • Flood Detector x1
  • User Manual x1

3. Product Overview

Familiarize yourself with the components of your Zigbee Water Immersion Sensor:

Top and bottom view of the Zigbee Water Immersion Sensor, showing conductive columns, reset button, and battery cover.
Figure 1: Product Structure Diagram. This image shows the top and bottom of the sensor, highlighting the conductive columns, reset button, and battery cover.
  • Conductive Columns: These are the sensing points that detect water.
  • Reset Button: Used for network configuration and resetting the device.
  • Battery Cover: Located on the bottom, provides access to the battery compartment.

4. Specifications

Feature Detail
Model Number zigbee water sensor
Dimensions Φ50 x 18mm
Working Temperature 0°C ~ +55°C
Connection Method ZigBee
Battery Type CR2032 3V (not included)
Smart Home Platform Tuya
Certification CE
Material Fireproof PC
Waterproof Level IP55
Product Weight Approximately 0.038 kg

5. Installation Precautions

  • This product is designed for indoor installation only.
  • The sensor should be placed directly in an area prone to water leakage, such as near water heaters, washing machines, or under sinks.
  • Do not install the sensor in locations exposed to rain, oily smoke, or steam, as this may affect its performance and lifespan.

6. Setup and Network Configuration

6.1. Battery Installation

The sensor requires a CR2032 3V battery (not included). Follow these steps to install the battery:

  1. Locate the battery cover on the bottom of the sensor.
  2. Use a coin or a small tool to twist the battery cover counter-clockwise to open it.
  3. Insert the CR2032 battery with the positive (+) side facing up.
  4. Replace the battery cover and twist clockwise to secure it.
Video 1: This video demonstrates the unboxing, battery installation, and pairing process of the Zigbee Water Immersion Sensor with the Tuya Smart Life app via a Zigbee gateway. It also shows a water detection test.

6.2. App Download and Installation

To use the sensor, you need the "Smart Life" App. Ensure your mobile phone and Zigbee gateway are connected to the same 2.4GHz WiFi network and are working normally.

  1. Scan the QR code below with your mobile phone or search for "Smart Life" in the App Store (iOS) or Google Play Store (Android).
  2. Download and install the "Smart Life" App.
  3. Open the App and complete the user registration process.
QR code for Smart Life App download and diagram showing app setup steps: Download and Install App, Input Verification Code, Create User Account, Setup Password, Add Home.
Figure 2: Smart Life App Download QR Code and Setup Flow. This diagram illustrates the steps for downloading the app, creating an account, and adding a home.

6.3. Pairing with Zigbee Gateway

The sensor requires a Zigbee gateway to function. Follow these steps to pair the sensor:

  1. In the Smart Life App, click the "+" icon in the upper right corner of the homepage to enter the "Add Manually" page.
  2. Select "Sensors" and then choose "Flood Detector (Zigbee)".
  3. On the "Reset device" prompt page, long press the Flood Detector's reset button for 6 seconds until the blue light flashes rapidly.
  4. In the App, confirm that "the indicator is blinking rapidly" and click "Next".
  5. The App will discover nearby devices. Once "1 device has been successfully added" appears, click "Done".
  6. You can then edit the device name and enter the main page to set and control the device. Click the back button to see the added "Flood Detector" on the homepage.

7. Operating Instructions

Once successfully paired, the sensor will monitor for water leakage. When water is detected (water level above 0.5mm), it will send an immediate wireless alarm signal to the server via WiFi, pushing real-time notifications to your mobile App.

Image showing the Zigbee Water Sensor next to a smartphone displaying a 'Water immersion alarm' notification.
Figure 3: Immediate Alert Notification. This image shows a smartphone receiving a 'Water immersion alarm' notification from the sensor.

7.1. Indicator Status Description

Device Status Indicator Status
Network configuration Light flashes
Network configuration is successful and the network is normal Light off
Network configuration is successful, send data Light flashes once

*Refer to these indicator statuses to understand the device's operational state.

8. Maintenance

8.1. Battery Replacement

The sensor is powered by a CR2032 3V battery. When the battery level is low, the app may notify you. Replace the battery by following the installation steps in Section 6.1.

8.2. Cleaning

Wipe the sensor with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the device.

9. Troubleshooting

  • Device not pairing: Ensure your Zigbee gateway and mobile phone are on the same 2.4GHz WiFi network. Long press the reset button for 6 seconds until the blue light flashes rapidly to put the sensor into pairing mode.
  • No alarm notifications: Check your app settings to ensure notifications are enabled. Verify the sensor is properly placed in an area prone to water leakage and that the conductive columns are making contact with water.
  • Unsolvable problems: If you encounter issues that cannot be resolved with the above steps, try resetting the network configuration (long press reset button for 6 seconds). If the problem persists, contact product after-sales service personnel for assistance.

10. User Tips

  • This sensor is compact and flat, making it ideal for discreet placement next to water tanks, under sinks, or in basements.
  • Remember that the CR2032 3V battery is not included with the product and needs to be purchased separately.
  • The sensor requires a Zigbee gateway to connect to your smart home system (e.g., Tuya Smart Life app, Home Assistant). It cannot connect directly to a WiFi network.

11. Warranty and Support

For warranty information and technical support, please refer to the product packaging or contact the seller directly. Keep your purchase receipt for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.