1. Product Overview
This series of DC power supplies are high-efficiency power supply devices designed specifically for low-voltage equipment. They provide a stable output voltage of 12V DC and are available in three models with different rated output currents: 1A, 2A, and 3A. These power supplies are suitable for various scenarios such as routers, surveillance cameras, LED light strips, small household appliances, and electronic equipment testing.
The product features a triple protection design against overcurrent, overvoltage, and short circuit, ensuring safety and reliability. It also boasts a compact size, good heat dissipation, and a long service life, meeting the light power consumption needs of households, offices, and industrial environments.
2. Technical Specifications
| Parameter Category | PS-1201 (12V 1A) | PS-1202 (12V 2A) | PS-1203 (12V 3A) |
|---|---|---|---|
| Input Voltage | AC 100-240V 50/60Hz | AC 100-240V 50/60Hz | AC 100-240V 50/60Hz |
| Output Voltage | DC 12V ±0.2V | DC 12V ±0.2V | DC 12V ±0.2V |
| Rated Output Current | 1A | 2A | 3A |
| Output Power | 12W | 24W | 36W |
| Efficiency | ≥85% | ≥88% | ≥90% |
| Protection Functions | Overcurrent Protection (OCP), Overvoltage Protection (OVP), Short Circuit Protection (SCP) | ||
| Operating Temperature | 0°C-40°C (No Condensation) | ||
| Storage Temperature | -20°C-60°C | ||
| Output Interface | Standard DC Interface (Default 5.5mm×2.1mm, Customizable) | ||
| Connection Type | Plug In | ||
| Output Type | AC (to DC conversion) | ||
| Certification | CE | ||
| Origin | Mainland China | ||
3. Installation and Usage Steps
3.1. Model Matching Confirmation
Before use, confirm the equipment requirements:
- The rated voltage of the equipment must be 12V DC. Do not use this power supply if the equipment voltage is of other specifications (e.g., 5V, 24V).
- The rated current of the equipment must be ≤ the rated current of the power supply (e.g., a 1A device can use 1A/2A/3A power supplies, while a 3A device can only use a 3A power supply) to avoid damage caused by power supply overload.
3.2. Connection Process
- Connect the Output End: Insert the DC plug of the power supply into the power interface of the equipment, ensuring the plug is fully inserted without looseness.
- Connect the Input End: Insert the AC plug of the power supply into a standard household/office socket (100-240V). At this point, the power indicator (if available) will light up, and the equipment will start receiving power.
- Usage Monitoring: During use, if the power supply case becomes abnormally hot (exceeding 60°C), emits an unusual odor, or the equipment suddenly powers off, immediately disconnect the power supply and troubleshoot the fault.
3.3. Power-off Steps
- First, unplug the DC plug from the equipment end.
- Then, unplug the AC plug of the power supply from the socket to avoid damage to the equipment due to instantaneous current impact.
4. Safety Precautions
- Do not disassemble or modify the power supply (it contains high-voltage components, and disassembly may cause electric shock).
- Do not operate the power plug with wet hands, and avoid liquid splashing into the power supply.
- Do not place the power supply on soft objects such as quilts or sofas during use (adequate ventilation must be maintained to prevent poor heat dissipation).
- Do not use the power supply in high-temperature, humid, dusty, or corrosive gas environments.
- Do not use the power supply for high-power equipment (e.g., motors, heating equipment) to avoid exceeding the rated power.
- Children must use the power supply under adult supervision to prevent accidental contact or ingestion of small parts.
5. Maintenance and Care
- Regularly wipe the power supply case with a dry, soft cloth to remove dust and keep the heat dissipation holes unobstructed.
- When not in use for a long time, disconnect the connections between the power supply, the socket, and the equipment, and store the power supply in a dry and ventilated environment.
- Avoid impact or extrusion on the power supply to prevent damage to the case or internal components.
6. Troubleshooting
Fault Handling
- If the power supply triggers a protection function (e.g., no output after a short circuit), first disconnect all connections, let it stand for 5 minutes, and then try again.
- If there is still no output, contact after-sales service for repair; do not attempt to repair it yourself.
- The general service life of the power supply is 3-5 years. It is recommended to replace it after exceeding the service life to avoid safety hazards.
7. User Tips
- Cable Length: Be aware that the power cable might be short. Plan your setup accordingly to ensure it reaches your desired location without strain.
- Current Matching: Always ensure the power supply's rated current (1A, 2A, or 3A) meets or exceeds the device's actual current draw. Using an underpowered adapter can lead to device malfunction or damage.
- Ideal for LED Lighting: This power supply is particularly well-suited for powering LED light strips and similar low-voltage lighting applications.
- Initial Testing: Test the power supply immediately upon receipt to ensure proper functionality and avoid issues later.
8. Warranty and Support
Warranty Period
From the date of purchase, the product enjoys a 1-year free warranty. Please note that damage caused by human factors or improper use is not covered by this warranty.
Additional Resources
A user manual in PDF format is available for download. You can view it here: User manual (PDF).
9. Frequently Asked Questions (FAQ)
- Q: What is the connector size of this power supply?
- A: The standard DC output interface is 5.5mm x 2.1mm.
- Q: Is a 9V version of this power supply available?
- A: This manual specifically covers the 12V series DC power supply. Other voltage versions are not detailed here.