Introduction
The Zealsound V7PRO is a versatile wireless lavalier microphone system designed for high-quality audio recording with various devices, including iPhones, iPads, Android phones, and cameras. It features a compact design, automatic pairing, noise reduction, and reverb functions, making it ideal for vlogging, interviews, live streaming, and other content creation.

Zealsound V7PRO Wireless Lavalier Microphone system with charging case.
Package Contents
Ensure all items are present in your package:

V7Pro One Drag Two Package contents diagram.
- 2 x Microphone Transmitters (Launchers)
- 1 x Microphone Receiver
- 1 x Charging Compartment (Case)
- 1 x Camera Cable
- 1 x Charging Line (USB-C)
- 1 x Lanyard
- 2 x Windproof Velvet (Mic Covers)
- 1 x User Manual (this document)
Product Overview
Familiarize yourself with the components and their functions:

Detailed diagram of the V7PRO system components and controls.
Receiver (Type-C / Lightning)
- Power Indicator: Shows charging status and power level.
- Status Indicator: Flashes red/blue alternately when pairing. Blue light is solid when connected. Red light is solid when charging (off when fully charged). Flashes red every 3 seconds when low power.
- Charging Interface: Type-C port for charging the receiver.
- Lightning Plug: Directly plugs into iPhone/iPad charging port.
- 3.5mm Output Interface: For connecting to cameras or headphones.
- Charging Electric Shock: Contacts for charging within the compartment.
Mic Transmitter
- Power Key: Press and hold for 3 seconds to turn on/off. Click to cycle through volume levels (1st, 2nd, 3rd gear; default is 2nd).
- Function Key (M button): Single click to turn noise reduction on/off. Double-click to mute/unmute. Long press to activate/deactivate reverb.
- Status Light: Flashes red/blue alternately when not connected. Solid red/blue (appears purple) when connected and noise reduction is on. Red light is solid when charging (off when fully charged). Flashes red every 3 seconds when low power.
- Radio Microphone: Main area for voice reception.
- Charging Contact: Contacts for charging within the compartment.
- Type-C Interface: For charging the transmitter.
Setup Guide
1. Initial Charging
Before first use, fully charge the charging compartment and both microphone transmitters. Use a 5V 1A power adapter (not included) with the provided Type-C charging line. Do not use fast charging adapters as this may cause damage.

The charging compartment provides extended battery life for the microphones.
2. Power On and Automatic Pairing
Simply take the microphone transmitters and receiver out of the charging compartment. They will automatically power on and attempt to pair. The status indicators on both devices will flash red and blue alternately during pairing. Once successfully paired, the receiver's blue light will be solid, and the transmitter's red and blue lights will be solid (appearing purple).

The microphone transmitter features a multi-function 'M' button.
3. Connecting to Mobile Phone (for Recording/Video)
- Ensure the microphone transmitter and receiver are powered on and paired.
- Plug the receiver directly into your mobile phone's charging port (Lightning for iPhone/iPad, Type-C for Android).
- Open your phone's camera app or a third-party recording application to begin recording.
- Note for Android users: Some Android phones may require enabling OTG (On-The-Go) function manually in settings for external microphones to work. Most modern Android phones do not require this.

Connecting the receiver to an Android phone (left) and an iPhone (right).
4. Connecting to Camera (for Recording/Video)
- Ensure the microphone transmitter and receiver are powered on and paired.
- Connect the receiver to your camera's 3.5mm audio input jack using the provided camera cable.
- Turn on your camera and select the external microphone input if necessary.
- Begin recording with your camera.
Demonstration of connecting the Zealsound V7PRO to various devices, including cameras and smartphones.
Operating Instructions
Noise Reduction
- Enable/Disable: Single-click the 'M' button on the microphone transmitter.
- The status light will change to indicate noise reduction status.
Mute Function
- Mute/Unmute: Double-click the 'M' button on the microphone transmitter.
- The blue light on the transmitter will flash when muted.
Reverb Function
- Activate/Deactivate: Long-press the 'M' button on the microphone transmitter.
- This enhances sound quality for live broadcasts or singing.
Volume Adjustment
- Adjust Volume: Click the Power Key on the microphone transmitter to cycle through three volume levels.
- The indicator light will flash once for the first gear, twice for the second, and three times for the third.
Playback While Charging
The receiver supports playback while charging, allowing you to record for extended periods without worrying about power outage anxiety.

The receiver supports charging while in use, preventing power anxiety.
Maintenance
- Keep the device dry. Avoid exposure to moisture or liquids.
- Clean the microphone and receiver with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Store the microphone system in its charging compartment when not in use to protect it and keep it charged.
- Avoid dropping or subjecting the device to strong impacts.
- Do not attempt to disassemble or repair the device yourself, as this will void the warranty.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Microphone not connecting/pairing. | Devices not powered on, out of range, or pairing failed. | Ensure both transmitter(s) and receiver are powered on. Place them close together for pairing. If issues persist, power cycle both devices. |
| No sound or low volume during recording. | Incorrect connection, phone/camera settings, or microphone volume too low. | Check if the receiver is securely plugged into the phone/camera. Verify phone/camera audio input settings. Adjust microphone volume using the Power Key. For Android, check if OTG is enabled. |
| Excessive noise or static. | Environmental interference, noise reduction off, or faulty connection. | Ensure noise reduction is enabled (single-click 'M' button). Move away from strong electromagnetic sources. Check for secure connections. |
| Microphone not charging. | Charging cable/adapter issue, or improper placement in charging case. | Ensure the charging cable and adapter are working. Verify the microphone is correctly seated in the charging compartment. Use a 5V 1A adapter. |
| Cannot record with phone's native camera app (Android). | Some Android native camera apps do not support external microphones. | Use a third-party recording application that supports external microphones. Check phone settings for OTG functionality. |
Specifications
| Feature | Detail |
|---|---|
| Rated Input | DC5V-1A |
| Polar Pattern | Omnidirectional |
| Frequency Range | 2.4G |
| Frequency Response | 50Hz-20KHz |
| Signal-to-Noise Ratio | ≥70dB |
| Transmission Distance | ≥15m (up to 20m stable reception) |
| Operating Temperature | -10°C to 45°C |
| Storage Temperature | -20°C to 60°C |
| Mic Transmitter Battery Capacity | 340mAh/3.7V |
| Charging Compartment Battery Capacity | 800mAh/3.7V |
| Mic Transmitter Working Time | About 15 hours |
| Charging Compartment Charging Time | About 3 hours |
| Charging Times (from case) | Can charge the device twice |
| External Dimension (Mic Transmitter) | 48 x 17 x 23 mm |
| External Dimension (Mic Receiver) | 53 x 41 x 11 mm |
| Overall Dimension (Charging Compartment) | 116 x 8 x 8 mm (This dimension seems incorrect from OCR, likely 116x80x80mm or similar for a case) |
User Tips
- For optimal audio quality, ensure the windproof velvet covers are used, especially in outdoor or windy conditions.
- If using with an Android phone and experiencing connection issues, check your phone's settings for an 'OTG' (On-The-Go) option and enable it.
- When connecting to a camera, use the provided 3.5mm camera cable and ensure your camera's audio input is set to external microphone.
- The 'One Drag Two' package allows two microphones to record simultaneously to a single receiver, which is useful for interviews or dual-person vlogs.
- Always ensure the devices are fully charged before important recording sessions to avoid interruptions.
Warranty and Support
The Zealsound V7PRO comes with a 12-month warranty. This warranty will be void if the equipment is altered, misused, mishandled, maladjusted, or suffers excessive wear.
For any questions or support, please contact our after-sales service via email at: smt@zealsound.com. We are committed to finding a solution for you.