1. Introduction
Thank you for choosing the ZealSound V7PRO Wireless Lavalier Microphone. This device is designed to provide high-quality audio recording for various applications, including vlogging, interviews, live streaming, and general video recording with smartphones (iPhone, iPad, Android) and cameras. This manual will guide you through the setup, operation, and maintenance of your new microphone system.
2. Safety Information
- Do not expose the device to extreme temperatures, humidity, or direct sunlight.
- Keep the device away from water and other liquids.
- Use only a 5V 1A power adapter for charging. Using adapters with higher rated power may cause damage to the product.
- Do not attempt to disassemble or modify the device, as this will void the warranty.
- Keep out of reach of children.
3. Package Contents
The V7PRO One Drag Two Package includes the following items:
- 2 x Microphone Transmitters (Launchers)
- 1 x Receiver
- 1 x Charging Compartment (Case)
- 1 x Camera Cable
- 1 x Charging Line (USB cable)
- 1 x Lanyard
- 2 x Windproof Velvets (Windscreen/Dead Cat)
4. Product Overview
The ZealSound V7PRO system consists of two microphone transmitters, one receiver, and a portable charging case.
4.1 Receiver Functions
- Power Switch: Press and hold for 3 seconds to turn on/off.
- Charging Interface (Type-C): Connect a 5V 1A power adapter for charging.
- Status Indicator (Lamp 1 & Lamp 2):
- On/Pairing: Lights 1 and 2 flash alternately red and blue. Once connected to a transmitter, the blue light of lamp 2 stays on.
- Charging (Receiver): When connected to a transmitter and charging, red light of lamp 1 and blue light of lamp 2 stay on.
- Charging (Off): Red light stays on when the machine is off and charging. Lamp 1 goes out when fully charged.
- Low Power: Lamp 1 flashes once every 3 seconds.
- Auto-off: If powered on but not paired for 5 minutes, it will automatically shut down.
- Lightning Plug: Directly plug into iPhone/iPad charging port.
- 3.5mm Output Interface: For connecting to cameras or 3.5mm earphones.
- Type-C Plug: Directly plug into Android phone charging port.
4.2 Microphone Transmitter Functions
- Power Key:
- Press and hold for 3 seconds to turn on/off.
- Click to cycle through volume levels (1st, 2nd, 3rd gear). Default is 2nd gear. Indicator flashes once for 1st, twice for 2nd, three times for 3rd.
- Function Key (M button):
- Single Click: Turn noise reduction on/off.
- Double Click: Mute/unmute the microphone.
- Long Press: Activate/deactivate reverberation (reverb).
- Status Light:
- On/Pairing: Red and blue flash alternately when not connected. Red and blue lights are on simultaneously (appears purple) when connected (noise reduction enabled by default).
- Charging: Red light on during charging, off when fully charged.
- Noise Reduction: Red and blue lights on simultaneously (purple) when noise reduction is on. Blue light always on when noise reduction is off.
- Reverberation: Red light flashes alternately once when reverb is on.
- Mute: Blue light flashes when mute is on. If noise reduction is also on, light flashes alternately in purple and red.
- Low Battery: Red light flashes once every 3 seconds.
- Radio Microphone: Main location for voice reception.
- Charging Contact & Type-C Interface: For charging and connecting Type-C headset for monitoring.
5. Setup
5.1 Initial Charging
Before first use, fully charge the microphone transmitters and the charging case. Connect the charging case to a 5V 1A power adapter using the provided Type-C charging cable. Place the transmitters into the charging case. The indicator lights will show charging status.
Important: Do not use fast charging adapters. Only use a 5V 1A power adapter to prevent damage.
5.2 Automatic Pairing
The V7PRO system features automatic pairing. Simply turn on both the receiver and the transmitter(s), and they will automatically connect. No manual operation is required for pairing.
5.3 Connecting to a Smartphone (iPhone/iPad/Android)
- Press and hold the power button on both the microphone receiver and transmitter(s) for 3 seconds to turn them on. They will automatically pair.
- For iPhones/iPads, directly plug the receiver's Lightning plug into your device's charging port.
- For Android phones, directly plug the receiver's Type-C plug into your device's charging port.
- Note for Android Users: Some Android phones may require you to manually enable the OTG (On-The-Go) function in your phone's settings for the microphone to work. Most Android phones have OTG enabled by default.
5.4 Connecting to a Camera
- Press and hold the power button on both the microphone receiver and transmitter(s) for 3 seconds to turn them on. They will automatically pair.
- Connect the microphone receiver to your camera using the provided 3.5mm camera cable.
6. Operating Instructions
6.1 Recording/Video Recording Mode (Mobile Phone)
- Ensure the receiver and transmitter(s) are powered on and paired.
- Connect the receiver to your mobile phone (as per Section 5.3).
- Set the transmitter to the non-reverberation state (reverberation is off by default. If it's on, long press the function key to turn it off).
- Open your mobile phone's camera app or any other recording application to start recording.
- Note: Most Android phones' native camera apps may not support external microphones. Use third-party recording apps if you encounter issues.
6.2 Live Broadcast Mode (Mobile Phone)
- Ensure the receiver and transmitter(s) are powered on and paired.
- Connect the receiver to your mobile phone (as per Section 5.3).
- Switch the microphone transmitter to your desired effect (e.g., with or without reverb, noise reduction).
- Open your live broadcast application to begin streaming.
6.3 Recording/Video Recording Mode (Camera)
- Ensure the receiver and transmitter(s) are powered on and paired.
- Connect the receiver to your camera (as per Section 5.4).
- Set the transmitter to the non-reverberation state (reverberation is off by default. If it's on, long press the function key to turn it off).
- Turn on your camera and start recording.
6.4 Microphone Controls
- Noise Reduction: Single click the 'M' button on the transmitter to toggle noise reduction on or off.
- Mute: Double-click the 'M' button on the transmitter to mute or unmute the microphone.
- Reverberation: Long press the 'M' button on the transmitter to activate or deactivate the reverb effect.
- Volume Adjustment: Click the power key on the transmitter to cycle through three volume levels.
6.5 Playback While Charging
The receiver supports playback while your phone is charging. This allows you to record for extended periods without worrying about your phone's battery life.
7. Maintenance
- Clean the device regularly with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Store the microphone system in its charging case when not in use to protect it from dust and physical damage.
- Ensure charging contacts are clean and free of debris for optimal charging performance.
- Avoid dropping or subjecting the device to strong impacts.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Microphone not pairing/connecting. | Devices not powered on; out of range; interference. | Ensure both receiver and transmitter(s) are turned on. Bring devices closer. Restart both devices. |
| No sound recorded on smartphone. | Android OTG function disabled; native camera app incompatibility; microphone muted. | For Android, check and enable OTG in phone settings. Try a third-party recording app. Ensure microphone is not muted (double-click 'M' button). |
| Poor audio quality/excessive noise. | Noise reduction off; environmental noise; microphone placement. | Single click 'M' button to enable noise reduction. Ensure microphone is clipped correctly and close to the sound source. |
| Device not charging. | Incorrect power adapter; loose connection; dirty contacts. | Use a 5V 1A power adapter. Check all cable connections. Clean charging contacts on devices and case. |
| Short battery life. | Not fully charged; old battery. | Ensure devices are fully charged before use. Battery performance may degrade over time. |
9. Specifications
9.1 Microphone Transmitter
- Rated Input: DC5V-1A
- Standard Charging Time: Approximately 2.5 hours
- Working Time: Approximately 15 hours
- Signal-to-Noise Ratio: ≥70dB
- Polar Pattern: Cardioid
- Frequency Range: 2.4G
- Frequency Response: 50Hz-20KHz
- Transmission Distance: ≥15m
- Operating Temperature: -10°C to 45°C
- Battery Capacity: 340mAh/3.7V
- External Dimension: 48 x 17 x 23 mm
- Storage Temperature: -20°C to 60°C
- Charging Interface: Type-C
9.2 Receiver
- External Dimension: 53 x 41 x 11 mm
- Charging Interface: Type-C
9.3 Charging Case
- Charging Interface: Type-C
- Battery Capacity: 800mAh/3.7V
- Rated Input: DC5V-1A
- Standard Charging Time: Approximately 3 hours
- Charging Cycles: Can charge the device twice
- Overall Dimension: 116 x 8 x 8 mm
Additional Properties:
- Diaphragm: S-Mall
- Communication: Wireless
- Set Type: Transmitter Sets
- Transducer: Condenser Microphone
- Use: Interview
- Style: Lavalier Microphone
- Origin: Mainland China
- Certification: CE
10. User Tips
- The compact size of the transmitter and receiver is equivalent to a regular USB drive, making it highly portable.
- Benefit from 2.4G wireless technology for stable and clear audio and video synchronization.
- Enjoy stable and clear reception even at a distance of up to 20 meters.
- The system supports playback while charging, eliminating power outage anxiety during long recording sessions.
- Automatic pairing upon startup means no manual operation is required, making it quick and easy to use.
- The receiver allows you to listen back to your audio without unplugging, ensuring efficient monitoring.
- If using an Android phone and experiencing issues, remember to check if the OTG function needs to be manually enabled in your phone's settings.
11. Frequently Asked Questions (FAQ)
- Q: Does it work with DSLR cameras?
- A: Yes, the V7PRO comes with a camera cable (3.5mm) and can be connected to DSLR cameras for recording.
- Q: Is this product original ZealSound brand?
- A: The product is certified by ZealSound. For authenticity concerns, please refer to the official brand information.
- Q: How do I connect the receiver to a computer for video recording?
- A: The receiver is primarily designed for direct connection to smartphones and cameras. For computer connection, you might need an additional adapter (e.g., USB audio interface) that supports external microphone input, as the receiver's output is typically for mobile/camera ports.
- Q: Is the lapel microphone compatible with Insta360 X3?
- A: Compatibility with specific action cameras like Insta360 X3 depends on the camera's external microphone input specifications. If the Insta360 X3 supports a 3.5mm external microphone input, it should be compatible using the provided camera cable.
- Q: Can I connect them to a Bluetooth speaker?
- A: The V7PRO uses 2.4G wireless technology for its connection between transmitter and receiver, not Bluetooth. It cannot directly connect to a Bluetooth speaker. You would need to connect the receiver to a device (phone/camera) and then output audio from that device to a Bluetooth speaker.
- Q: What is the range distance?
- A: The transmission distance is stated to be ≥15 meters (approximately 20 meters in optimal conditions).
- Q: Does it have a headphone output?
- A: Yes, the receiver has a 3.5mm output interface which can be used to connect earphones for real-time audio monitoring.
12. Warranty and Support
The ZealSound V7PRO comes with a 12-month warranty from the date of purchase. This warranty will be void if the equipment is altered, misused, mishandled, maladjusted, or suffers from excessive wear and tear.
For any questions, technical support, or warranty claims, please contact our after-sales service team via email at: smt@zealsound.com. We are committed to providing the best possible solution for your needs.
You can also refer to the official PDF user manual for more detailed information: View User Manual (PDF)