Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your IKSLED Penetrable Touch Sensor Switch. This innovative switch allows for control of LED lighting through various surfaces, offering a seamless and modern lighting solution for smart homes.
Safety Information
- Ensure the power supply is disconnected before installation or maintenance.
- Verify that the working voltage and current of your LED lights and power adapter match the switch's specifications.
- Do not use this induction switch to control motors, solenoid valves, solar lights, constant current lamps, or other incompatible equipment.
- Keep the switch and wiring away from water and moisture.
- Ensure the switch is securely fixed during use to prevent erratic behavior.
Package Contents
Please check the package for the following items:
- IKSLED Penetrable Touch Sensor Switch (Model A or Model B)
- Instruction Manual (this document)
- Touch Sensing Area Sticker (optional use)
Specifications
| Feature | Specification |
|---|---|
| Model | Penetrating wood panel sensor (Wooden Touch Sensor Switch) |
| Working Voltage | DC 3.7V ~ 24V |
| Max Current | 3A (for 12V), 2.5A (for 24V) |
| Max Wattage |
|
| Switch Type | Touch On/Off Switch |
| Features | Penetrable switch sensor, Dimmable (Model B), Memory function (Model B) |
| Material | Plastic |
| Certification | CCC |
| Warranty | 1 year |
Setup and Installation
Follow these steps to correctly install your touch sensor switch:
1. Wiring Instructions
Please connect the wires as described in the diagram below. Ensure correct polarity (positive and negative poles) for both input and output connections.
The switch uses Dupont connectors for easy connection. The input cable (1m) connects to the LED driver, and the output cable (0.5m) connects to the LED lights.
2. Installation Steps
- Connect the LED light to the switch's output.
- Securely fix the induction switch to the desired location. The switch is designed to be penetrable, meaning it can be installed behind non-metallic surfaces up to 3cm thick (e.g., wood panels).
- Connect the switch's input to the LED driver.
- Finally, turn on the power supply to use the switch.
Operating Instructions
The IKSLED Touch Sensor Switch comes in two models with different functionalities:
Model A: Touch On, Leave Off
This model functions as a simple on/off switch. A short touch will turn the light on. The light will remain on until the power is disconnected or the switch is reset.
Model B: Touch On, Touch Off, Long Touch Dimmable
This model offers more advanced control. A short touch will toggle the light on or off. A long touch will activate the dimming function, allowing you to adjust the brightness of the LED lights. This model also features a memory function, retaining the last brightness setting.
Model B can also be touched directly on the sensor itself for operation.
Product Demonstration Video
Watch this video for a visual guide on the installation and operation of the IKSLED Touch Sensor Switch:
Maintenance
- Keep the switch and surrounding area clean and dry.
- Avoid exposing the switch to extreme temperatures or direct sunlight.
- Do not attempt to open or repair the switch yourself, as this may void the warranty.
Troubleshooting
If the light remains on or off after connecting the wires, and the switch cannot be controlled, consider the following:
-
Mismatch of Working Voltage:
Resolvent: First, confirm that your power adapter provides a constant voltage (DC3.7V, 5V, 12V, or 24V) and that your LED light is compatible with the same voltage (DC3V, 3.7V, 5V, 12V, or 24V).
-
Input/Output and Positive/Negative Poles are Reversed:
Resolvent: Check if the input/output and positive/negative poles are connected in reverse. If so, please correct the connections.
-
Switch Not Fixed Securely:
Resolvent: If the switch is not fixed and moves during use, it may constantly check the environment, leading to erratic behavior. Turn off the power, securely fix the induction switch, and then resume use.
Common Issues and Solutions:
- Switch does not work through thick surfaces: The penetrable switch is designed to work through non-metallic materials up to 3cm thick. It may not function reliably with thicker materials (e.g., 40mm chipboard) or certain dense materials.
- Switch only works with 12V: Ensure your power supply and LED lights match the specified voltage range (3.7V-24V). If your setup is strictly 12V, ensure you have the correct model or compatible components.
User Tips
- The penetrable design allows for creative installations, such as behind desks or shelves, making it fun to surprise others with hidden lighting controls.
- The switch has been reported to work effectively with 12V fans, indicating versatility beyond just LED strips.
- For optimal performance, ensure the surface material is within the recommended thickness (up to 3cm) and is non-metallic.
- Consider using the provided 'Touch Sensing Area' sticker as a visual guide for the touch point, even if the switch is hidden.
Warranty and Support
This IKSLED Penetrable Touch Sensor Switch comes with a 1-year warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use.
For further assistance or detailed documentation, you may refer to the official user manual PDF, if available, from the seller's product page.