1. Product Overview
This product is a replacement trim piece made of high-quality ABS plastic, designed to offer excellent corrosion resistance and anti-aging properties. It is intended for automotive interior and exterior modifications, specifically for the roof rack rail ends of the Toyota Land Cruiser Prado 150 FJ150 models from 2010 to 2018.
2. Key Features
- Vehicle Compatibility: Designed specifically for Toyota Land Cruiser Prado 150 FJ150 models manufactured between 2010 and 2018. Ensure compatibility with your vehicle before purchase.
- Durable ABS Plastic: Constructed from high-quality ABS plastic, providing excellent durability and resistance to impact and various weather conditions. This material helps maintain a sleek appearance over time.
- Replace Original Parts: These covers are designed to replace existing roof rack rail end covers. They feature built-in clips for a firm and secure fit.
- Protection: Effectively covers and protects the rear section of your roof rack from dirt, debris, and harsh weather, contributing to the longevity and appearance of your vehicle's roof rack system.
- Eco-Friendly Material: Made from non-toxic materials, compliant with EU RoHS and REACH standards.
3. Package Contents
The package includes:
- 1 set of roof rack covers (4 pieces: front left, front right, rear left, rear right)
4. Safety Information & Warnings
Warning: Please read the following safety warnings carefully before installation:
- Driving Safety: NEVER attempt installation while the vehicle is in motion. Install only when the vehicle is stationary and parked in a safe area.
- Visibility Obstruction: After installation, carefully check that the trim does not obstruct the mirror's field of view or interfere with the visibility of turn signals. If any obstruction occurs, discontinue use and remove the trim immediately.
- Surface Preparation: The installation surface must be thoroughly cleaned and completely dry. Oil, dust, or moisture on the surface will prevent proper adhesion, causing the trim to detach while driving, which poses a safety hazard.
- Non-Structural Component: This product is for aesthetic decoration only. It provides no structural support or safety protection functions.
- Suffocation Hazard: To avoid danger of suffocation, keep the plastic packaging bag away from babies and children. Do not use this bag in cribs, beds, carriages, or playpens. This bag is not a toy.
5. Installation Steps
Professional installation is recommended for optimal results and to ensure a tight fit.
- Verify Compatibility: Before beginning, please check that the product is the correct compatible model for your vehicle (Toyota Land Cruiser Prado 150 FJ150, 2010-2018).
- Prepare Surface: Ensure the installation surface on your vehicle's roof rack is thoroughly cleaned and completely dry. Remove any oil, dust, or moisture to ensure proper adhesion and prevent detachment.
- Remove Old Parts: Carefully remove the existing roof rack rail end covers.
- Install New Covers: Align the new covers with the corresponding positions on the roof rack rails. The new covers are designed to snap into place using their built-in clips. Apply gentle, even pressure until the clips engage and the cover is firmly secured. Installation may require some effort to ensure a tight fit.
- Final Check: After installation, visually inspect all four covers to ensure they are securely attached and do not show any signs of looseness. Verify that the trim does not obstruct your mirrors or turn signals.
6. Operating Instructions
As an aesthetic and protective trim piece, this product does not have operational functions. Once correctly installed, it serves its purpose passively by protecting the roof rack ends and enhancing the vehicle's appearance.
7. Maintenance
- Cleaning: Clean the covers regularly with standard automotive cleaning products to maintain their appearance. Avoid abrasive cleaners that could damage the ABS plastic.
- Damage Handling: If the trim becomes cracked, broken, or severely faded, replace it promptly. This prevents debris from falling off and affecting driving safety.
8. Troubleshooting
- Cover Detachment: If a cover detaches, it may be due to improper surface preparation (oil, dust, moisture) or incorrect installation. Re-clean the surface thoroughly and re-install, ensuring the clips are fully engaged.
- Broken Clips: The built-in clips are designed for a secure fit. If clips break during installation or removal, the cover may not be able to be re-secured. Exercise care during installation and removal. Replacement of the entire cover set may be necessary if individual bottom clips are not available separately.
- Fit Issues: If the covers do not fit correctly, double-check the product compatibility with your specific vehicle model and year.
9. Specifications
| Attribute | Detail |
|---|---|
| Brand Name | Cherk |
| Material | ABS Plastic |
| Item Type | Roof Racks & Boxes (Accessory) |
| Compatibility | Toyota Land Cruiser Prado 150 FJ150 (2010-2018) |
| Item Weight | 0.5 kg (approx.) |
| Package Dimensions (L x W x H) | 40 cm x 14 cm x 9 cm (approx.) |
| Origin | Mainland China |
10. User Tips
- Color Matching: While the product is black, slight color variations may occur. Please consider this if precise color matching is critical for your vehicle.
- Careful Installation: The clips are designed for a tight fit. Be careful during installation and removal to avoid breaking the hooks, as this can compromise the secure fit.
- Set Purchase: The product is sold as a set of four (front left, front right, rear left, rear right). If only a single cover or specific parts are needed, the entire set must be purchased.
- PDF Manual: A detailed user manual in PDF format is available for further reference.
11. Warranty & Support
For any questions, concerns, or support regarding this product, please contact the seller or manufacturer directly. Please refer to the original purchase documentation for specific warranty details, if applicable.