1. Introduction
Thank you for choosing the Laiwen T005 Rechargeable Bluetooth Hearing Aids. This device is designed to provide digital sound amplification and is suitable for individuals with moderate to severe hearing loss. It features Bluetooth connectivity for calls and music, and can be controlled via a dedicated mobile application for personalized sound adjustments.
For a more detailed guide, please refer to the complete user manual available in PDF format.
2. Important Safety Precautions
- Never attempt to disassemble, remodel, or repair the product yourself. This carries a risk of injury.
- Do not use an unnecessarily loud volume. Prolonged exposure to loud sounds can cause further hearing damage.
- Do not expose this product to water, heat, or fire. Contact with liquids may cause electric shock or fire.
- Do not attempt to insert foreign objects into the device.
- Do not hit, crush, or use excessive force with the product.
- If you experience any discomfort or notice unusual behavior from the device, discontinue use immediately and contact support.
- This product contains small pieces and should be kept out of reach of children.
3. Package Contents
Please check the package for the following items:
- 2 x T005 Hearing Aids (Left and Right)
- 1 x Charging Case
- Multiple pairs of Silicone Ear Tips (various sizes)
- 1 x USB Type-C Charging Cable
- 1 x Quick Start Manual (this document)
- 1 x Full User Manual (PDF, accessible online)
4. Product Overview
The T005 hearing aids are designed for comfort and discreet use, resembling modern wireless earbuds. The charging case provides portable power and features a digital battery indicator.
- Touchpad: For manual control (power on/off, call management).
- LED Light: Indicates status (pairing, charging, power).
- Mic-Phone Hole: Captures sound for amplification and calls.
- Battery Indicator: Digital display on the charging case shows remaining battery percentage for the case and individual earbuds (L/R).
- Type-C USB Cable Outlet: For charging the case.
5. Setup Guide
5.1. Charging the Device
- Place both hearing aids into their respective slots in the charging case.
- Close the lid of the charging case.
- Connect the provided USB Type-C cable to the charging port on the case and plug the other end into a suitable USB power adapter (not included).
- The digital display on the charging case will show the charging status and battery levels.
- A full charge typically takes approximately 1 hour for the earbuds. The charging case provides multiple charges for the earbuds.
5.2. Wearing Your Hearing Aids
- Remove the devices from the charging case, grasping them from the sides.
- Pinch the silicone ear tip with your fingers to shrink it. It will expand once in your ear, creating a light and secure fit.
- Insert the devices into your ear canal, gently twisting and rotating them to ensure a deep and secure fit.
5.3. Power On/Off
- Automatic: The devices will automatically power on when removed from the charging case and power off when placed back into the charging case and the lid is closed.
- Manual Power On: Press and hold the touchpad button on the earbud for several seconds until you hear a power-on prompt.
- Manual Power Off: Press and hold the touchpad button on the earbud for several seconds until you hear a power-off prompt.
5.4. Bluetooth Pairing
- Ensure the hearing aids are charged and powered on (removed from the case). They will automatically enter Bluetooth pairing mode.
- On your mobile phone or other Bluetooth-enabled device, go to Bluetooth settings.
- Search for new devices and select "T005" from the list. Tap to connect.
- Once connected, you can use the hearing aids for listening to music, watching TV, and making calls.
5.5. App Download and Connection
The mobile application allows for advanced control and personalization of your hearing aids.
- For iOS Devices:
- Visit: https://apps.apple.com/cn/app/widersonic/id1577782600
- Alternatively, search for "Widersonic" (or "Mirasing" as reported by some users) in the Apple App Store.
- For Android Devices:
- Scan the QR code provided in your physical Quick Start Manual using a browser app.
- Alternatively, visit the website: http://helphearingaid.top/
- Some users have reported success searching for "MIRASING LINK" in their app store.
To connect the device to the app:
- Open the downloaded app on your phone.
- Tap the "Search device" option to begin scanning.
- Ensure your hearing aids are powered on (removed from the charging case).
- Once the device is detected, select its name (e.g., T005-L, T005-R) and choose the left or right ear to enter the main control page.
6. Operating Instructions
Once connected via Bluetooth and the app, you can customize your hearing experience.
6.1. Volume Control
- Use the volume sliders within the app to adjust the amplification level for each ear independently. Select a comfortable listening volume.
- The volume of the left and right ear can be set differently according to your specific hearing loss.
6.2. Program/Mode Adjustment
- The app provides different listening modes (e.g., Mode 1, Mode 2, Mode 3, Mode 4). Tap the squares in the app to switch between these programs.
- Choose the mode that best suits your environment or personal preference. If you have an audiogram, you can select a mode that closely matches your hearing profile.
6.3. Equalizer/Frequency Band Adjustment
- Within the app, navigate to the frequency band settings.
- Move the sliders to adjust the gain for different frequencies (e.g., 500Hz, 1kHz, 2kHz, 3kHz, 4kHz) to fine-tune the sound to your specific needs.
6.4. Phone Calls and Music
- Once connected via Bluetooth, the hearing aids function as a Bluetooth headset, allowing you to listen to music and make/receive phone calls.
- Use the touchpad on the earbuds to answer/end calls (specific gestures may vary, refer to the full PDF manual).
- The device supports Bluetooth 5.0 for stable connectivity.
7. Troubleshooting
- No Sound or Weak Amplification:
- Ensure the hearing aids are fully charged and powered on.
- Check the volume settings in the app and on your connected device.
- Verify that the ear tips are securely fitted in your ear canal.
- Confirm Bluetooth connection is active.
- Whistling or Feedback Noise:
- This often occurs due to an improper fit. Re-insert the hearing aids, ensuring a snug seal in the ear canal.
- Try different sizes of ear tips to find the best fit.
- Reduce the volume slightly.
- Bluetooth Connectivity Issues:
- Turn off and on your phone's Bluetooth, then try pairing again.
- Forget the device in your phone's Bluetooth settings and re-pair.
- Ensure the hearing aids are close to your phone during pairing.
- Restart both your phone and the hearing aids.
- App Not Working (Android Specific):
- Some users report difficulty with the Android app. Try searching for "MIRASING LINK" in your app store or use the provided website/QR code.
- Ensure your Android OS version is compatible.
- Settings Not Saving in App:
- Some users have reported that app settings may reset. If this occurs, re-adjust your preferred volume and program settings as needed.
- Excessive Noise Outdoors (No Wind Filter):
- The device may not have an advanced wind noise reduction feature. In windy environments, consider adjusting the volume or mode for better clarity.
8. Maintenance
- Cleaning: Regularly clean the ear tips and the body of the hearing aids with a soft, dry cloth. Do not use liquids or harsh chemicals.
- Storage: When not in use, store the hearing aids in their charging case to protect them and keep them charged.
- Battery Care: Avoid fully discharging the batteries frequently to prolong their lifespan. Charge the case and earbuds regularly.
- Avoid Extreme Conditions: Do not expose the device to extreme temperatures, humidity, or direct sunlight.
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | T005 (TWS08-BK-APP) |
| Max Sound Output | 114dB |
| Bluetooth Version | 5.0 |
| Earbud Working Time | ≥8 Hours |
| Charging Case Working Time | ≥16 Hours (provides 3 charges for earbuds) |
| Total Working Time | 24 Hours |
| Package Weight | 0.203 kg |
| Package Dimensions (L x W x H) | 17cm x 13cm x 6cm |
| Origin | China Mainland |
10. User Tips
- App Compatibility: For Android users, if the QR code link for the app doesn't work, try searching for "MIRASING LINK" in your app store. Be aware of potential regional restrictions or compatibility issues with newer Android versions.
- Subscription Alert: One user reported that the app might require a subscription. Please verify this information upon app installation if app features are crucial for your use.
- Optimal Fit: Experiment with the different sizes of ear tips to find the most comfortable and secure fit. A good seal is essential for sound quality and to minimize feedback.
- Dual Functionality: Remember that these devices can also function as regular Bluetooth headphones for listening to music and making calls, in addition to their hearing aid capabilities.
- Outdoor Use: Due to the reported lack of a dedicated wind filter, you might experience increased background noise when using the hearing aids outdoors. Adjust settings or consider usage in quieter environments.
- Settings Persistence: Some users have noted that app settings may not always save. If you find your personalized settings reverting, you may need to re-adjust them each time you use the app.
11. Warranty and Support
For detailed information regarding warranty, returns, and technical support, please refer to the comprehensive user manual (PDF) provided by the seller. You can typically find a link to this document on the product's purchase page or by contacting the seller directly.
The PDF user manual can be referenced here: User manual (PDF)