1. Introduction
Thank you for purchasing the KuWFi CPF905 Waterproof Outdoor 4G LTE WiFi Router. This device is designed to provide robust and reliable internet access via a 4G/3G SIM card, or through a wired connection (Gateway mode). It is suitable for both indoor and outdoor environments, offering high-speed internet and WiFi coverage for multiple concurrent users.
This manual provides detailed instructions for setting up, operating, and maintaining your CPF905 router. Please read it carefully before use.
2. Package Contents
Please check the package for the following items:
- 1 x KuWFi CPF905 4G LTE WiFi Router
- 1 x Power Adapter (DC 12V-1A)
- 1 x Ethernet Cable
- 2 x Detachable Antennas (1x 4G Antenna, 1x 2.4G Wifi Antenna)
- 1 x User Manual (this document)
- Zip Ties for mounting
3. Product Overview
3.1. Device Layout
- DC 12V-1A Port: For connecting the power adapter.
- Micro USB Port: Can be used for power input (e.g., from a power bank).
- SIM Slot: For inserting a Standard 4G SIM card (2FF).
- WAN/LAN Port: An Ethernet port that can function as either a WAN (for internet access in Gateway mode) or a LAN (for connecting wired devices). Supports 48V PoE.
- RESET Button: Used to restore the router to factory default settings.
3.2. LED Indicators
- Power Light: Indicates power status.
- Wifi Light: Indicates WiFi activity.
- WAN/LAN Light: Indicates activity on the WAN/LAN Ethernet port.
- Wifi Signal: Indicates the strength of the WiFi signal.
- Ethernet Connect: Indicates a successful Ethernet connection.
- 4G Signal Indicators: Multiple LEDs to show 4G signal strength.
4. Setup Instructions
4.1. Attaching Antennas
Carefully screw the two detachable antennas onto the designated ports at the top of the router. Ensure they are finger-tight.
4.2. Inserting the SIM Card
- Open the protective cover at the bottom of the router to access the SIM card slot.
- Insert a Standard SIM card (2FF) into the SIM slot with the gold contacts facing down and the notched corner oriented as shown in the image.
- Push the SIM card gently until it clicks into place.
- Close the protective cover firmly to ensure the IP65 waterproof rating is maintained.
Important: Ensure the SIM card is inserted correctly before powering on the device. The protective cover must be securely closed for outdoor use to maintain waterproofing.
4.3. Powering On the Router
- Connect the provided power adapter to the DC 12V-1A port on the router.
- Plug the power adapter into a wall outlet.
- Alternatively, you can power the router via the Micro USB port using a compatible power source (e.g., a power bank).
- The Power Light and other indicators will illuminate as the router starts up.
The router will automatically attempt to connect to the internet via the 4G SIM card. Once connected, the 4G signal indicators will show the signal strength.
4.4. Initial Wi-Fi Connection
- On your computer or mobile device, search for available Wi-Fi networks.
- Locate the SSID (network name) of your KuWFi router. The default SSID is typically 4G-CPE_XXXX or similar, and the default password is 1234567890. This information is usually found on a sticker on the device.
- Select the router's SSID and enter the default password to connect.
If your device cannot connect to the network, please refer to the Troubleshooting section.
5. Operation
5.1. Accessing the Web Management Interface
- Ensure your device is connected to the router's Wi-Fi network or via an Ethernet cable.
- Open a web browser and enter the default IP address: 192.168.199.1
- Enter the default username (usually 'admin') and password (usually 'admin') to log in.
Note: The default login credentials are often found on a sticker on the device.
5.2. Changing Wi-Fi Settings (SSID and Password)
- Log in to the web management interface.
- Navigate to 'Wi-Fi Settings'.
- You can change the SSID (network name) and Wi-Fi password here.
- Click 'Apply' to save changes.
5.3. PIN Management
If your SIM card has a PIN code enabled, you will need to manage it through the router's interface.
- Log in to the web management interface.
- Navigate to 'Device Settings' > 'PIN Management'.
- You can enable/disable the PIN or change it here.
- Click 'Apply' to save changes.
5.4. APN Settings
If the router does not connect to the internet automatically, you may need to configure the APN (Access Point Name) settings for your SIM card's carrier.
- Log in to the web management interface.
- Navigate to 'Network Settings' > 'APN'.
- Click 'Add New' and enter the APN details provided by your mobile carrier (Profile Name, APN, MCC, MNC, Authentication, Username, Password).
- Click 'Apply' to save changes.
5.5. Network Selection (4G/3G Lock)
If you experience unstable signal, you can manually lock the network to 4G or 3G to improve stability.
- Log in to the web management interface.
- Navigate to 'Network Settings' > 'Network Selection'.
- Choose '4G Only' or '3G Only' if needed, instead of 'Automatic'.
- Click 'Apply' to save changes.
5.6. Account Management
It is recommended to change the default login username and password for security reasons.
- Log in to the web management interface.
- Navigate to 'Device Settings' > 'Account Management'.
- Enter your 'Current Username' and 'Current Password'.
- Enter a 'New Username' and 'New Password', then confirm.
- Click 'Apply' to save changes.
5.7. Ethernet Settings (Gateway Mode)
The router can also function in Gateway mode, receiving internet via the WAN/LAN Ethernet port without a SIM card.
- Log in to the web management interface.
- Navigate to 'Network Settings' > 'Ethernet'.
- Configure the 'Connection type' (e.g., Auto, PPPoE, Dynamic IP) based on your internet service provider's requirements.
- Click 'Apply' to save changes.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the router. Do not use liquid cleaners or aerosols.
- Waterproofing: For outdoor use, ensure all port covers and the SIM card slot cover are securely closed to maintain the IP65 waterproof rating. Regularly inspect these seals for wear or damage.
- Firmware Updates: Check the manufacturer's website (www.kuwfi.com) periodically for firmware updates to ensure optimal performance and security.
- Storage: When not in use for extended periods, store the router in a cool, dry place away from direct sunlight.
7. Troubleshooting
7.1. No Internet Connection
- Check SIM Card: Ensure the SIM card is correctly inserted and activated with a data plan. Verify the SIM card's frequency band is compatible with your router's version (e.g., EU version supports FDD: B1/B3/B5/B7/B8/B20, TDD: B38/B39/B40/B41).
- PIN Code: If your SIM card has a PIN, disable it or enter it via the web management interface (Section 5.3).
- APN Settings: Verify and configure the correct APN settings for your carrier (Section 5.4).
- Signal Strength: Check the 4G signal indicators. If the signal is weak, try repositioning the router or adjusting the antennas.
- Network Mode: Try manually selecting a network mode (4G Only or 3G Only) in the web interface (Section 5.5) if the signal is unstable.
7.2. Cannot Connect to Wi-Fi
- Check Wi-Fi Light: Ensure the Wi-Fi indicator light is on.
- SSID/Password: Double-check the Wi-Fi network name (SSID) and password.
- Distance: Ensure your device is within the Wi-Fi range of the router.
7.3. Slow Internet Speed
- Signal Strength: A weak 4G signal will result in slower speeds. Try to improve signal reception.
- Network Congestion: Performance can be affected by network congestion from your mobile carrier.
- Data Cap: Check if you have exceeded your SIM card's data allowance, which may lead to throttled speeds.
7.4. Router Not Responding
- Reboot: Disconnect the power, wait 10 seconds, and reconnect.
- Factory Reset: If the issue persists, use a pin to press and hold the RESET button for about 5-10 seconds until the lights flash. This will restore the router to its factory default settings. You will need to reconfigure all settings.
8. User Tips
- Easy Installation: Many users find the installation process fast and simple.
- Region-Specific Settings: Remember to check and potentially change the country settings in the web interface, as the default might be set to China.
- SIM Card Compatibility: Be aware that some specific SIM cards or carriers (e.g., Noitel, Digi Spain) might not be compatible. Always verify band support for your region and carrier.
- Mounting: While the included bracket is functional, some users suggest exploring alternative mounting solutions for enhanced stability, especially in outdoor environments.
- Power Options: The Micro USB port allows for flexible powering options, such as using a power bank, which can be useful for remote or temporary setups.
- Wired Connectivity: The WAN/LAN port allows you to connect wired devices like IP cameras, even when using a SIM card for internet access.
- SMS Functionality: The router's web interface includes SMS features, allowing you to send and receive text messages.
9. Specifications
| Feature | Specification |
|---|---|
| Brand Name | KuWFi |
| Model | CPF905 |
| Type | Wireless Router with 4G LTE Modem |
| Wi-Fi Transmission Standard | 802.11n (compatible with 802.11b/g) |
| 2.4G Wi-Fi Transmission Rate | Up to 300 Mbps |
| Wi-Fi Supported Frequency | 2.4 GHz (Single-Band) |
| 4G LTE Download Speed | Up to 150Mbps (CAT4) |
| 4G LTE Upload Speed | Up to 50Mbps (CAT4) |
| WAN Ports | 1 x 10/100Mbps (Supports 48V PoE) |
| LAN Ports | 1 x 10/100Mbps (Shared with WAN) |
| USB Interfaces | 1 x Micro USB (for power input) |
| SIM Card Slot | Standard SIM card (2FF) |
| Antenna Type | Detachable (1x 4G Antenna, 1x 2.4G Wifi Antenna) |
| Waterproof Rating | IP65 |
| Functions | Firewall, SMS, Gateway Mode |
| Recommended Uses | Home, Garden, Farm, Factory, Outdoor |
| Dimensions (approx.) | 30cm (H) x 8cm (W) x 3cm (D) |
| Certification | CE |
| Supported 4G LTE Bands (EU Version) | FDD: B1/B3/B5/B7/B8/B20, TDD: B38/B39/B40/B41 |
10. Warranty and Support
For technical support or warranty inquiries, please contact KuWFi customer service:
- Website: www.kuwfi.com
- Email: amazon1@kuwfi.com
If you encounter any issues that cannot be resolved using this manual, please do not hesitate to reach out to our support team for assistance.
A PDF version of the user manual is available for download: User Manual (PDF)