Introduction
Thank you for choosing the Dragonhawk A1 Pro Wireless Tattoo Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and keep it for future reference.
The Dragonhawk A1 Pro offers a 2000mAh battery, customized motor, 4.0mm stroke, and Bluetooth connectivity.
Setup
1. Unboxing and Initial Inspection
Carefully unpack all components. Ensure all items listed in the package contents are present and undamaged. Remove any protective films from the device, especially from the screen.
Video: Unboxing and initial overview of the Dragonhawk A1 Pro tattoo kit components.
Remove the protective film from the screen before use.
2. Charging the Device
Before first use, fully charge the machine. Connect the Type-C charging cable to the charging port on the device and to a suitable USB power adapter. The battery display on the screen will indicate the charging status.
- Charging Time: Approximately 1.5 hours.
- Working Time: 5-7 hours on a full charge.
Battery specifications and charging time for the A1 Pro.
3. Attaching the Cartridge
- Insert the tattoo cartridge into the machine's cartridge connector.
- Rotate the cartridge clockwise to securely fasten it.
Securely insert and twist the cartridge clockwise.
Operation
1. Controls and Display
The Dragonhawk A1 Pro features an easy-to-use operating system with clear controls and a digital display:
- Power Button: Long press to turn on/off. Short press to start/pause when powered on.
- Voltage Increase (+): Press to increase the working voltage.
- Voltage Decrease (-): Press to decrease the working voltage.
The screen displays the following information:
- Voltage Display: Shows the current working voltage.
- Battery Level Display: Indicates remaining battery charge.
- Working Status Display: Shows if the machine is running or paused.
- Working Time Display: Tracks the duration of the current tattooing session.
The A1 Pro's intuitive controls and clear digital display.
2. Adjusting Needle Length
Rotate the grip of the machine to adjust the needle length according to your tattooing needs.
3. Recommended Voltage Settings
Optimal voltage settings can vary based on needle type, skin type, and desired effect. General recommendations are:
- For Shading: 6V - 7.5V
- For Lining: 7V - 8.3V
Recommended voltage ranges for different tattooing techniques.
4. Bluetooth Mode
The A1 Pro supports Bluetooth connectivity, allowing wireless control via a foot pedal, app, or other compatible controller.
- Ensure the tattoo machine is turned off.
- Simultaneously press the "Power Button", "<", and ">" buttons.
- Wait for the blinking Bluetooth icon to appear on the screen. This indicates the machine is searching for a device to pair with.
- Activate Bluetooth on your external device (foot pedal, app, etc.) and set it to pairing mode.
- Once successfully paired, a checkmark will appear on the screen, and the machine will enter standby mode.
- A blue Bluetooth icon on the standby screen indicates a successful connection. A gray icon means the connection failed. If unsuccessful, verify your Bluetooth accessory or app settings and retry the pairing process.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your tattoo machine.
- Cleaning: After each use, wipe down the machine with a suitable disinfectant solution. Avoid getting liquids into the motor or charging port.
- Storage: Store the machine in a clean, dry place away from direct sunlight and extreme temperatures.
- Needle Cartridges: Always use new, sterile needle cartridges for each client. Dispose of used cartridges safely and responsibly.
Troubleshooting
If you encounter any issues with your Dragonhawk A1 Pro, refer to the common problems and solutions below:
| Issue | Possible Cause & Solution |
|---|---|
| Machine won't start or unstable power output. | Check power, connections, and voltage settings. Ensure the machine is adequately charged. |
| Incorrect stroke or needle depth. | Adjust the stroke and needle depth by rotating the grip. |
| Excessive motor noise. | Check if the motor module and needle cartridge are securely attached. |
| Bluetooth connection issues. | Ensure Bluetooth is enabled on both devices and follow the pairing steps. If the icon is gray, re-attempt pairing. |
For step-by-step troubleshooting videos, you can scan the QR code provided in the original user manual or visit the official Dragonhawk YouTube channel.
Specifications
The Dragonhawk A1 Pro Wireless Tattoo Machine is designed for reliable performance. Key specifications are:
Detailed specifications of the Dragonhawk A1 Pro.
| Feature | Specification |
|---|---|
| Brand Name | DRAGONHAWK |
| Model Number | Dragonhawk A1 Pro Set |
| Gun Type | Electric |
| Material | Aluminum |
| Commodity Quality Certification | CE |
| Origin | Mainland China |
| Type | Tattoo Gun / Wireless Tattoo Machines |
| Number of Pieces | One Unit |
| Is Batteries Included | Yes |
| Stroke Length | 4.0mm |
| Motor Type | Dragonhawk Latest customized motor |
| Battery Capacity | 2000mAh |
| Charging Time | 2 hours |
| Working Time | 6-7 hours |
| Working Voltage | 4V-12V |
| Speed | 12V/10000PRM |
| Machine Weight | 182g |
| Diameter & Length | 33.6mm*130.5mm |
| Usage | Body Art & Permanent Makeup |
| Connect Cord | Type-C |
User Tips
- Always ensure the machine is fully charged before a session to avoid interruptions.
- Familiarize yourself with the voltage settings for different techniques (lining vs. shading) to achieve optimal results.
- Consider purchasing extra compatible cartridges to ensure you always have a fresh supply.
Warranty & Support
For any warranty claims, technical support, or service inquiries, please contact the seller or the official Dragonhawk customer service. Keep your purchase receipt as proof of purchase.
A detailed user manual in PDF format is available for download. You can find it by searching for "Dragonhawk A1 Pro User Manual PDF" online or by visiting the official Dragonhawk website. The direct link provided by the seller is: User manual (PDF).
Frequently Asked Questions (FAQ)
- Q: What cartridges are compatible with this machine?
- A: The Dragonhawk A1 Pro is designed to work with standard tattoo needle cartridges. Ensure you use high-quality, sterile cartridges for best results and safety.
- Q: What type of charging port does it use?
- A: The machine uses a Type-C charging port for convenient and fast charging.
- Q: Can this machine be used for micropigmentation?
- A: While the machine is versatile, it is primarily designed for body art tattooing. For micropigmentation, specialized machines and needles are often recommended. Consult with a professional for specific micropigmentation applications.
- Q: What is the battery capacity and working time?
- A: The A1 Pro features a 2000mAh battery, providing approximately 6-7 hours of working time on a full charge.