REVODATA POE4805-G

Contents

48V Gigabit PoE Injector User Manual

Model: POE4805-G

1. Product Overview

This manual applies to the POE (Power over Ethernet) series of accessories, including core products such as POE power supplies (injectors), POE splitters, and POE extenders. POE technology transmits both data and power simultaneously over a single Ethernet cable, eliminating the need to lay separate power lines. This significantly simplifies the deployment of network devices while reducing installation costs and complexity. Widely utilized to power network terminal devices such as IP cameras, wireless APs, VoIP phones, and smart sensors—these accessories are suitable for a diverse range of environments, including homes, enterprises, campuses, and security surveillance systems.

All accessories in this POE series comply with IEEE 802.3af/at/bt standards. Featuring functions such as intelligent detection, overload protection, and short-circuit protection, they automatically identify POE-compliant Powered Devices (PDs), providing safe and stable power and data transmission services to terminal devices while also supporting the upgrade and retrofitting requirements of non-POE equipment.

Video: A 12-second product showcase of the 48V Gigabit PoE Injector, demonstrating its physical appearance, ports (POE, LAN), and power plug options (US and EU).

48V 0.5A Gigabit PoE Injector with US and EU plugs

Image: The 48V 0.5A Gigabit PoE Injector, showing its compact black casing with POE and LAN ports, and interchangeable US and EU power plugs. The label on the injector indicates it's a "SWITCHING GIGABIT POWER SUPPLY" with input AC 100-240V, output DC 48V/0.5A, and data rate Gigabit.

2. Safety Precautions

2.1 General Safety Guidelines

  • Please operate the product within the working voltage and power ranges specified on its label. Operation exceeding these limits is strictly prohibited, as it may result in equipment damage or pose safety hazards.
  • Prior to installation or wiring, ensure that the power supply to all equipment is disconnected to prevent electric shock or short-circuit accidents. When performing operations, please wear insulating gloves to avoid direct contact between your hands and metal connectors.
  • Accessories must be stored in a well-ventilated, dry, and cool environment, away from water sources, high temperatures, flammable or explosive materials, and corrosive gases. Avoid exposure to direct sunlight or immersion in rainwater. The operating environment temperature must comply with the product specifications (typically 0°C to 45°C), and the relative humidity should be maintained between 10% and 90% RH (non-condensing).
  • Unauthorized disassembly or modification of the accessory's housing or internal circuitry is strictly prohibited. Any repairs must be performed by qualified technical personnel; failure to comply will void the product warranty and may pose safety risks.
  • If the accessory is to remain unused for an extended period, please disconnect its power supply to prevent excessive standby power consumption and premature equipment aging.

2.2 Wiring Safety Precautions

  • Please use pure copper Ethernet cables of Cat5e specification or higher that comply with relevant standards. Avoid using Copper-Clad Aluminum (CCA) cables or inferior-quality cables; otherwise, this may lead to unstable power supply, data packet loss, or even cable overheating—caused by excessive electrical resistance—which could result in equipment damage.
  • The transmission distance of the Ethernet cable must be kept within the product's specified range (standard PoE transmission distance is limited to 100 meters; the use of a repeater can extend this to 200 meters). Exceeding the specified distance will result in power attenuation and signal distortion.
  • When routing cables outdoors, a lightning arrester must be installed. Additionally, both ends of shielded cables must be properly grounded to eliminate electromagnetic interference and prevent equipment damage caused by lightning strikes.
  • When making connections, ensure that the interfaces are correctly matched; avoid reverse connections or misconnections, as this may prevent the device from functioning properly or result in equipment damage.

3. Product Interface Description

PoE Power Supply Unit (Injector)

  • Data In (Data Input Port): An RJ45 interface used to connect to standard ports on non-PoE network devices (such as switches or routers) for receiving data signals.
  • PoE Out (PoE Output Port): An RJ45 interface used to connect to PoE-powered devices (such as IP cameras or wireless APs), transmitting both data and power simultaneously.
  • Power (Power Port): Connects to the accompanying power adapter to provide operating power to the supply unit.
  • LED Indicators: PWR (Power Status) and PoE (Power Supply Status); these indicators display the device's operational status.
PoE Injector connection diagram

Image: A diagram illustrating the connection of the PoE Injector. AC 100-240V power input connects to the injector. Data In from a router or network switch connects to the LAN port. Power + Data Out (PoE Output) from the POE port connects to PoE IP Cameras, Wireless APs, or VoIP Phones.

4. Indicator Light Descriptions

The meanings of the indicator lights on all PoE accessories are generally consistent; please refer to the specific product markings for exact details:

  • PWR (Power Indicator): Off = No power; Solid (Green) = Normal power supply; Flashing = Power anomaly.
  • PoE (Power Supply Status Indicator): Off = No powered device detected or no power being supplied; Solid (Green) = Normal power supply; Flashing (Green) = Power supply anomaly (e.g., overload, short circuit); Yellow = Standby mode.
  • Link (Port Connection Indicator): Off = No device connected; Solid = Connection established; Flashing = Data transmission in progress.

5. Setup (Installation and Usage Steps)

5.1 Preparation

  1. Inspect the accessory packaging to ensure it is intact; verify that all components are present and free from damage or missing parts.
  2. Confirm whether the terminal devices (e.g., IP cameras, wireless APs) support PoE power supply. If using non-PoE devices, a PoE splitter must be used in conjunction.
  3. Prepare pure copper Ethernet cables of Cat5e specification or higher that meet the requirements; cut the cables to the appropriate length based on the installation distance, and ensure the RJ45 connectors are securely crimped.
  4. Verify that the power output of the power-sourcing equipment (e.g., PoE switches, power adapters) is compatible with the devices to prevent overloading.

5.2 Installation Steps for Different Scenarios

Scenario 1: Non-PoE Switch + PoE Injector + PoE Terminal Device (Most Common Scenario)

  1. Power-off Operation: Disconnect all power sources from the non-PoE switch, the PoE injector, and the terminal device.
  2. Connect Data Input: Insert one end of an Ethernet cable into a standard LAN port on the non-PoE switch, and insert the other end into the "Data In" port on the PoE injector.
  3. Connect PoE Output: Insert one end of an Ethernet cable into the "PoE Out" port on the PoE injector, and insert the other end into the RJ45 network port on the PoE terminal device.
  4. Power On: Plug the PoE injector's power adapter into a mains outlet, then connect it to the injector's "Power" port; subsequently, power on the non-PoE switch.
  5. Status Check: Observe the indicator lights on the PoE injector. If the "PWR" light remains steadily lit, the "PoE" light remains steadily lit, and the terminal device boots up normally, the installation is successful.

Scenario 2: PoE Switch + PoE Splitter + Non-PoE End Device (Non-PoE Device Upgrade Scenario)

  1. Power-off Procedure: Disconnect the power supply from the PoE switch, the PoE splitter, and all non-PoE terminal devices.
  2. Connect PoE Input: Insert one end of an Ethernet cable into a PoE port on the PoE switch, and insert the other end into the "PoE In" port on the PoE splitter.
  3. Connect Data and Power: Insert one end of an Ethernet cable into the "Data Out" port on the PoE splitter, and insert the other end into the network interface of the non-PoE terminal device; using the DC power cable provided with the splitter, insert one end into the "DC Out" port on the splitter and the other end into the power input of the non-PoE terminal device (ensure voltage compatibility).
  4. Power On: Connect the power supply to the PoE switch. Observe the indicator lights on the splitter; if the "PoE" light remains steadily lit and the terminal device boots up normally, the installation is successful.

Scenario 3: PoE Switch + PoE Repeater + PoE End Device (Long-Distance Transmission Scenario)

  1. Power-off Operation: Disconnect all power sources from the PoE switch, the PoE repeater, and the end device.
  2. Connect Repeater Input: Insert one end of an Ethernet cable into a PoE port on the PoE switch, and insert the other end into the "PSE In" port on the PoE repeater (ensure the transmission distance does not exceed 100 meters).
  3. Connect Repeater Output: Insert one end of an Ethernet cable into the "PoE Out" port on the PoE repeater, and insert the other end into the RJ45 port on the PoE end device (the extended distance should not exceed 100 meters, and the total distance should not exceed 200 meters).
  4. Power-on: Connect the power supply to the PoE switch. Observe the repeater's indicator lights: if both the PWR and PoE lights remain steadily lit, and the end device boots up normally, the installation is successful.

6. Operating

Routine Operation

  • Once the device has powered on, no manual configuration is required; the accessory will automatically detect the powered device (PD) and simultaneously initiate both power supply and data transmission (for unmanaged accessories).
  • If you need to replace a terminal device, you must first disconnect the power to the PoE accessory before plugging or unplugging the network cable to prevent potential device damage caused by hot-swapping.

7. Maintenance

  • Periodically check to ensure that network cable connections are secure and that the status indicators are functioning normally.
  • Keep the device in a clean, dry, and well-ventilated environment.
  • Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
  • Do not attempt to open or modify the device, as this will void the warranty and may cause damage.

8. Troubleshooting

  • No Power (PWR LED Off): Check the power adapter connection to the PoE injector and the wall outlet. Ensure the outlet is functional.
  • No PoE Output (PoE LED Off): Verify that the connected device is PoE-compatible. Check the Ethernet cable connection between the injector's PoE Out port and the powered device.
  • Power Anomaly (PWR or PoE LED Flashing Green): This indicates an overload or short circuit. Disconnect the powered device and check for faults. Ensure the total power draw does not exceed the injector's capacity.
  • No Network Connection (Link LED Off): Check the Ethernet cable connections between the injector's Data In port and the network source, and between the PoE Out port and the powered device. Ensure both devices are powered on and functioning.
  • Slow Data Transmission: Ensure you are using Cat5e or higher pure copper Ethernet cables. Verify that the network source and powered device support Gigabit speeds if applicable. If you observe abnormal indicator blinking, frequent terminal device restarts, or similar issues, promptly troubleshoot the network cable or the device itself.

9. Specifications

PoE Injector specifications diagram

Image: A diagram detailing key specifications of the PoE Injector. Transmission Rate: 10/100/1000Mbps (Gigabit). PoE Standard: IEEE802.3af (15.4W), IEEE802.3at (30W). PoE Output: DC 48V/0.5A. Input Voltage: AC100V-240V.

General Specifications
FeatureDetail
Brand NameREVODATA
Model NumberPOE4805-G
Item TypePoE Injector
PoE TypePoE Injector
PoE StandardsIEEE 802.3af (15.4W), IEEE 802.3at (30W)
Network Speed10/100/1000Mbps Auto-negotiation (Gigabit)
Transmission Rate10/100/1000Mbps
Switch Capacity1G/2G
Input VoltageAC 100V-240V, 50~60 Hz
PoE Output VoltageDC 48V/0.5A
PoE PowerMax 30W
PoE Rate1G/2G
Pins1/2(+), 3/6(-), 4/5(+), 7/8(-)
Data12345678, 8 pin data
Transmission DistanceStandard 100 meters (extendable to 200 meters using a repeater)
Size80 x 32 x 44 mm (or 8 x 4.5 x 3.5 cm from image)
Weight80g
ColorBlack
MaterialABS Plastic
RJ45Shield RJ45
Plug TypeUS, EU
CertificationCE
Operating Temperature0°C-45°C (Standard Models); -5°C-45°C (Industrial Models)
Storage Temperature-40°C-70°C
PoE Injector features and dimensions

Image: A detailed view of the PoE Injector highlighting its features: Wall Mount Hole, Anti-Slip Design, Frosted Shell Case. It also lists protections: Overcurrent Protection, Overcharge Protection, Overvoltage Protection, Anti-Interference Protection. Physical specifications include: Weight: 80g, RJ45: Shield RJ45, Material: ABS Plastic, Dimension: 8 x 4.5 x 3.5 cm.

Gigabit vs Non-Gigabit PoE Injector comparison

Image: A comparison between Gigabit PoE Injector and Non-Gigabit PoE Injector, showing network connection properties. Gigabit PoE Injector reaches up to 1.0 Gbps for faster data transmission and less delay. Non-Gigabit PoE Injector only supports 10/100Mbps, which might cause delay.

10. User Tips

  • Cable Length: Be aware that the included power cable may be short. Plan your installation location accordingly or prepare an extension if needed.
  • Gigabit Performance: While the device supports Gigabit speeds, ensure your connected devices and network infrastructure also support Gigabit to fully utilize its capabilities.
  • Packaging: The product is typically delivered well-packaged, ensuring it arrives in good condition.

11. Warranty and Support

Warranty Information

  • Warranty Period: This PoE accessory is covered by a 1-year free warranty service and lifetime maintenance support, effective from the date of purchase (excluding damage caused by human error or force majeure).
  • Warranty Coverage: Covers malfunctions preventing normal operation that stem from inherent product quality issues including damaged ports, circuit failures, abnormal indicator lights, etc. This coverage does not extend to peripheral accessories such as network cables or power adapters (which carry a separate 6-month warranty period).
  • Exclusions:
    1. Damage caused by human error (e.g., disassembly, modification, accidental drops, short circuits, etc.).
    2. Damage caused by force majeure events (e.g., lightning strikes, fire, floods, etc.).
    3. Expiration of the warranty period.
    4. Damage resulting from failure to operate the device in accordance with the user manual.

After-Sales Support

Should the device malfunction, please contact your authorized distributor or the official customer support team. Provide the product model and a description of the malfunction to receive professional repair guidance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.