UXCELL Electric Oven Thermostat

Contents

Electric Oven Thermostat User Manual

Brand: UXCELL | Model: Electric Oven Thermostat

1. Introduction

Welcome to the user manual for your UXCELL Electric Oven Thermostat. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new temperature control switch. Please read this manual thoroughly before use and keep it for future reference.

2. Safety & Warnings

  • Read all instructions before use to ensure safety and prevent damage.
  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Ensure power is disconnected before any installation or maintenance.
  • Do not disassemble the device randomly.
  • Keep away from water, dust, and corrosive substances to prevent short circuits.
  • Avoid heavy impact.

3. Product Overview

The UXCELL Electric Oven Thermostat is a versatile temperature control switch designed for various heating and cooling applications, including electric ovens, refrigerators, and heaters. It features a capillary probe for accurate temperature sensing and a rotary knob for easy temperature setting.

UXCELL Electric Oven Thermostat with capillary probe and control knob
Figure 1: The complete thermostat unit, including the control knob, main body, capillary tube, and temperature sensing probe, along with two mounting screws.

4. Specifications

FeatureSpecification
Product NameElectric Oven Thermostat
MaterialMetal, Plastic
Temperature Range0-40℃ / 0-50℃ / 0-60℃
Power250/380V 16(2)A
Contact Type1NO 1NC
Probe Size (D*H)6 x 125mm / 6 x 122mm / 6 x 110mm
Wire Length1.5m
Total Size (L*W*H)65 x 55.5 x 46mm
ScrewsM4*7.5mm

5. Installation (Setup)

  • Important: Ensure the main power supply is disconnected before beginning installation.
  • Install the thermostat correctly according to the circuit diagram provided on the device. Ensure all connections are tight and secure.
  • The capillary probe should be positioned to accurately sense the temperature of the environment or appliance it is controlling.
Back view of the thermostat showing electrical terminals P1, 1, 2, and power ratings
Figure 2: Rear view of the thermostat, highlighting the three electrical terminals (P1, 1, 2) and the engraved power specifications (16(2)A ~250/380V). This serves as the wiring diagram for proper electrical connection.

6. Operation

  • Once installed and powered, rotate the control knob to set the desired temperature. The thermostat will maintain the set temperature by switching the connected appliance on or off.
  • Press lightly to turn the switch on or off; do not use excessive force on the knob.
Close-up of the thermostat's control knob with temperature markings from 0 to 40 degrees Celsius
Figure 3: Close-up of the thermostat's rotary knob, clearly indicating temperature markings from 0 to 40 degrees Celsius, allowing for precise temperature adjustment.

7. Maintenance

  • Regularly inspect the thermostat for any signs of wear or damage.
  • Keep the device clean and free from dust accumulation.
  • Avoid exposing the thermostat to water, excessive moisture, or corrosive chemicals.
  • If maintenance is required, always turn off the power supply to the appliance before proceeding.
  • Do not attempt to disassemble the thermostat unless you are a qualified technician.

8. Troubleshooting

  • Device not turning on: Check power connections and ensure the thermostat is correctly wired. Verify the power supply to the appliance.
  • Incorrect temperature reading: Ensure the capillary probe is properly positioned and not damaged.
  • Thermostat not switching: Check for loose connections. If the issue persists, professional inspection may be required.
  • For complex issues, consult a qualified electrician or appliance repair specialist.

9. User Tips

No specific user tips are available from customer reviews or Q&A for this product at this time.

10. Manufacturer & Support

Manufacturer Information:

  • Company: Guangzhou Dajiali Network Technology Co., Ltd.
  • Address: B395, Room 106, Rulin Street, Tianhe, Guangzhou, China
  • Email: udb7910@126.com

EU Authorized Representative:

  • Company: Apex CE Specialists GmbH
  • Address: Room 1411, Lankun Building, No. 213 Minkang Road, Longhua District, Shenzhen, Guangdong
  • Email: Info@apex-ce.com

For additional information and detailed diagrams, please refer to the official user manual PDF available at: https://manuals.plus/m/e7ee60f2d7fdb65856b77f80a785417d72e7252d21b4915ac00c4b8f6f472168

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.