Hongwin 9806147980

Contents

PCV Valve Cover Repair Kit Instruction Manual

Model: 9806147980

Brand: Hongwin

1. Introduction

This instruction manual provides detailed information for the installation and maintenance of the Hongwin PCV Valve Cover Repair Kit. This kit is designed to replace the valve cap and membrane in compatible vehicle models, restoring proper engine ventilation and performance.

Video: Product showcase of the PCV valve cover repair kit components.

2. Safety Information

  • Always ensure the engine is cool and the vehicle is turned off before beginning any repair work.
  • Wear appropriate personal protective equipment, such as gloves and eye protection.
  • Keep all components and tools away from children.
  • Dispose of old parts and packaging responsibly.
  • WARNING: To avoid danger of suffocation, keep plastic bags away from babies and children. Do not use this bag in cribs, beds, carriages, or play pens. This bag is not a toy.

3. Package Contents

The Hongwin PCV Valve Cover Repair Kit typically includes the following components:

  • PCV Valve Cap
  • PCV Membrane
  • Spring (may vary based on kit version)
PCV Valve Cover Repair Kit components: cap, membrane, and spring

Image: All repair kit components laid out.

4. Specifications

Product Specifications
AttributeValue
BrandHongwin
Product NameAuto Valve Cover Repair Kit (Membrane)
Model Number8200629199
OEM NO.9806147980, 98 061 479 80, 2269606, 1860576
MaterialSilicon Material PA66+GF30
Country of OriginMainland China
Package Dimensions (approx.)10 cm (Length) x 10 cm (Width) x 10 cm (Height)
Package Weight (approx.)0.1 kg

Component Dimensions

Dimensions of the PCV membrane

Image: Detailed dimensions of the PCV membrane (57mm diameter, 32mm, 10mm, 47.5mm).

Dimensions of the PCV cap

Image: Detailed dimensions of the PCV cap (63mm diameter, 45mm, 15mm).

5. Compatibility

This repair kit is compatible with various Citroen, Peugeot, and Ford vehicles. Please verify the OEM numbers and dimensions against your existing part to ensure proper fitment.

  • Citroen / Peugeot: 2.0 HDI engines (OEM: 9806147980)
  • Ford: 2.0 TDCI engines (OEM: 1860576, 2269606)
  • Also compatible with OEM 8200629199.

Important: Always confirm the dimensions and model type of your original part before purchasing and installing this repair kit.

6. Setup and Installation

Follow these general steps for installing the PCV Valve Cover Repair Kit. Specific procedures may vary by vehicle model; consult your vehicle's service manual for detailed instructions.

  1. Ensure the engine is completely cool and the vehicle is safely parked with the ignition off.
  2. Locate the PCV valve cover on your engine.
  3. Carefully remove the existing PCV valve cap and membrane. Note how the original components are assembled.
  4. Clean the area thoroughly, ensuring to remove any oil stains.
  5. If necessary, apply AB glue as per the original part's requirements or vehicle service manual.
  6. Install the new membrane, ensuring it is seated correctly.
  7. Place the spring (if included and applicable) into position.
  8. Install the new PCV valve cap, ensuring it is securely fastened.
  9. Double-check all connections and ensure no tools or debris are left in the engine bay.
PCV Valve Cover Repair Kit components installed on a valve cover

Image: Example of PCV valve cover with repair kit components.

7. Operating Instructions

Once installed, the PCV Valve Cover Repair Kit operates automatically as part of your engine's positive crankcase ventilation system. No user interaction is required during operation.

After installation, start your engine and check for any unusual noises, leaks, or warning lights. If any issues arise, refer to the troubleshooting section.

8. Maintenance

The PCV membrane and cap are wear-and-tear components. Regular inspection is recommended as part of your vehicle's routine maintenance schedule. Replace the kit if you observe signs of cracking, hardening, or tearing of the membrane, or if the cap is damaged.

9. Troubleshooting

Troubleshooting Guide
ProblemPossible CauseSolution
Engine still smoking after replacementIncorrect installation, faulty part, or other engine issues.Re-check installation for proper seating. Verify part compatibility. Consult a professional mechanic if the issue persists.
Oil leaks around the valve coverImproperly seated cap/membrane, damaged seal, or membrane softening.Ensure the cap and membrane are correctly installed and sealed. Inspect the membrane for damage or premature softening. Consider reusing the original cap if the new one does not fit perfectly.
New cap does not fitIncorrect part dimensions for your specific vehicle model.Verify the dimensions of the new cap against your original part. If dimensions differ, consider using only the new membrane with your original cap, provided it is in good condition.
Membrane too small/largeIncorrect part dimensions for your specific vehicle model.Carefully measure the diameter of your original membrane and compare it to the product specifications (Image: Membrane Dimensions). Ensure correct part selection.

10. User Tips

  • Verify Compatibility: Always double-check the dimensions and OEM numbers of your existing part against the product specifications to ensure a perfect fit. Some users reported issues with the cap or membrane size not matching their specific vehicle model.
  • Lid Fitment: If the new lid (cap) does not fit perfectly, some users have successfully used the new membrane with their original lid and spring.
  • Effectiveness: This kit has been reported by users to be effective in resolving engine smoking issues related to PCV valve malfunction.
  • Installation Ease: Many users found the installation process to be straightforward.
  • Spring Variation: The included spring might be slightly different from the original, but it has been reported to function correctly.

11. Warranty and Support

For any questions, technical assistance, or warranty claims, please contact the manufacturer directly:

  • Manufacturer: Wenzhou Haowei Auto Parts Co., Ltd.
  • Customer Service Email: inf@hwautoparts.com
  • Customer Service Tel: +86-18005775583
  • Manufacturer Address: Floor 2, Building 8 (West), Hantian Hardware and Electrical City, Tangxia Town, Ruian City, Zhejiang Province, China
  • EU Representative (EC REP): MJCM SARL
  • EU Representative Address: CN-78 avenue des Champs Elysees Office 326
  • EU Representative Tel: +33-767213611
  • EU Representative E-mail: mjcm190928@gmail.com

Please retain your purchase receipt for warranty purposes.

© 2023 Hongwin. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.