Introduction
Thank you for choosing the NOKLEAD LCD Digital Thermometer Hygrometer. This device provides accurate indoor and outdoor temperature and humidity readings, helping you monitor your environment for optimal comfort and health. Featuring a large LCD display, wireless remote sensor, and various useful functions, it is an ideal tool for any household or office.
NOKLEAD LCD Digital Thermometer Hygrometer with remote sensor
Package Contents
- 1 x Main Display Unit
- 1 x Wireless Remote Sensor
- 1 x User Manual
- (Batteries not included)
Product packaging showing the main unit, remote sensor, and manual
Product Overview
Main Display Unit
The main unit features a 3.7-inch large backlight LCD screen for easy reading. It displays indoor and outdoor temperature and humidity, comfort level, time, and date.
Close-up of the 3.7" large backlight LCD screen
Buttons and Features (Rear View)
Back view of the main unit showing buttons and battery compartment
- °F/°C Selector: Switch between Fahrenheit and Celsius.
- Time Setting / 12/24H Selector: Set the time and choose 12-hour or 24-hour format.
- Plus (+): Adjust values upwards during setting.
- Minus (-): Adjust values downwards during setting.
- MAX/MIN Value Display: View maximum and minimum recorded temperature/humidity.
- Foldable Kickstand: For tabletop placement.
- Battery Cover: Access to the battery compartment.
- Hanging Hole: For wall mounting.
Wireless Remote Sensor
The remote sensor wirelessly transmits outdoor temperature and humidity data to the main unit. It has a maximum transmission range of 100m/328ft in an open area.
Diagram illustrating the wireless transmission range of the sensor
Waterproof Reminder (Rear View)
Back of the remote sensor with a waterproof reminder
WATERPROOF REMINDER:
- Please ensure this sensor is always placed upright to ensure no water can enter the transmitter.
- Air Sensor Vent at the bottom of the transmitter should be facing downward.
Setup
-
Battery Installation
Open the battery compartment on the back of both the main display unit and the remote sensor. Insert the required AAA batteries (not included), ensuring correct polarity (+/-). Close the battery covers securely.
-
Pairing the Remote Sensor
The main unit and remote sensor should automatically pair upon battery installation. If pairing does not occur, or if you are setting up multiple sensors, refer to the troubleshooting section or the detailed PDF manual for specific pairing instructions.
-
Placement
Main Display Unit: Place the main unit indoors on a flat surface using its foldable kickstand or mount it on a wall using the hanging hole. Ensure it is in a central location for optimal reception from the remote sensor.
Remote Sensor: Place the remote sensor outdoors in a sheltered location, away from direct sunlight and rain. Ensure it is placed upright with the air sensor vent facing downward to prevent water ingress. For best results, avoid placing it near large metal objects or electrical appliances that could interfere with the wireless signal.
Dimensions and installation features of the main unit and remote sensor
Operating Instructions
Display Features
Key features and indicators
- Indoor/Outdoor Temperature: Displays current temperature for both locations.
- Indoor/Outdoor Humidity: Displays current humidity levels for both locations.
- Trend Indicator: Arrows indicate whether temperature/humidity is rising, falling, or stable.
- Comfort Level Indicator: Shows DRY (0-29%), COMFORT (30-69%), or WET (70-99%) based on humidity levels.
- Time and Date: Displays the current time and date.
Air Comfort Level Indicator
Function Buttons
- °F/°C Button: Press to switch the temperature display between Celsius (°C) and Fahrenheit (°F).
- MAX/MIN Button: Press to view the maximum and minimum temperature and humidity recorded since the last reset. Press again to cycle through MAX, MIN, and current readings. Hold to reset MAX/MIN records.
- Time Setting Button: Press to enter time setting mode. Use the '+' and '-' buttons to adjust values. Press the Time Setting button again to confirm and move to the next setting (e.g., 12/24H format, hour, minute, date).
- Backlight Button (on front): Touch the light bulb icon on the front of the display to activate the backlight for a few seconds, making it easier to read in low light conditions.
Maintenance
- Battery Replacement: Replace batteries in both units when the low battery indicator appears on the display. Use AAA batteries.
- Cleaning: Clean the device with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
- Remote Sensor Care: As noted, ensure the remote sensor is always placed upright in a sheltered location to protect it from direct rain and moisture.
Troubleshooting
-
No outdoor reading or flashing display:
- Ensure both the main unit and remote sensor have fresh batteries installed correctly.
- Check that the remote sensor is within the 100m/328ft transmission range and there are no major obstructions (thick walls, large metal objects) between the units.
- Try re-pairing the sensor: Remove batteries from both units, wait a few minutes, then reinsert batteries into the remote sensor first, followed by the main unit. They should automatically connect.
-
Inaccurate temperature/humidity readings:
- Ensure both units are placed away from direct heat sources (sunlight, appliances) or cold drafts.
- Allow the units to stabilize for at least 30 minutes after initial setup or battery change.
- Compare readings with another known accurate thermometer/hygrometer. If there's a consistent offset, some units may have a minor calibration difference, which is common for consumer-grade devices.
-
Display is dim or unresponsive:
- Replace the batteries in the main unit.
- Ensure the backlight button is functioning correctly.
Specifications
| Feature | Specification |
|---|---|
| Brand | NOKLEAD |
| Model | 6202 (CU50) |
| Display Type | Digital LCD (3.7 inches) |
| Measurement Type | Thermometer Hygrometer |
| Power Source | AAA Battery (not included) |
| Main Unit Dimensions (H x W x D) | 87mm x 90mm x 23mm |
| Remote Sensor Dimensions (H x W x D) | 101mm x 64.3mm x 20mm |
| Wireless Transmission Range | Max 100m / 328ft (in open area) |
| Installation Style | Standing and Wall Hanging |
User Tips
- For the outdoor sensor, ensure it is securely mounted to prevent dislodgement by strong winds. Consider using additional fasteners if necessary.
- If you notice a slight discrepancy in temperature readings compared to other devices, allow both the main unit and sensor ample time to acclimate to their respective environments.
- To maximize the lifespan of your batteries, consider using high-quality alkaline batteries.
Product Demonstration Video
Watch this video for a visual guide on the product's features and basic operation:
Video demonstrating the features and setup of the NOKLEAD Thermometer Hygrometer.
Warranty and Support
For any questions, technical support, or warranty inquiries, please contact NOKLEAD customer service at support@vocoovip.com. Please refer to the full PDF manual for detailed warranty information and terms.
A comprehensive user manual in PDF format is available for download. You can find it by searching for 'NOKLEAD 6202 User Manual PDF' online or by visiting the manufacturer's support website.