PaiPaitek PD0529-1-TIO

Contents

PaiPaitek PD0529-TIO 2-IN-1 Remote Dog Training Collar User Manual

Model: PD0529-1-TIO

Pet Training Systems

1. Introduction

1.1. Statement

Thank you for purchasing the remote dog training collar PD 529-TIO. This product has been tested to meet our stringent quality standards, and is covered with a warranty for 12 months from the date of its original purchase.

1.2. Safety Instruction

Training collars are used to train dogs, not for punishment. Use properly with care, and the collar can be a safe and effective tool to train, build communication, and strengthen your bond with your best friend. Obey all safety messages that follow this instruction to avoid possible injury.

Important: If your dog has heart disease, high blood pressure, cerebral thrombosis, skin allergies, etc., please do not use this product.

1.3. Reinforce Learning Behaviors

If your dog knows a command but responds inconsistently, a training collar can sharpen its skill. For example, if your dog responds slower to a 'come' command, you can communicate with them via the remote transmitter to elicit an immediate response.

  1. Set the collar to an initial stimulation level and test it.
  2. Fit the collar on your dog's neck along with its regular collar.
  3. Allow your dog to roam around the training area. Then give the command and press the stimulation button simultaneously.
  4. If your dog moves toward you, stop the stimulation and praise them.
  5. If your dog stops before reaching you or turns away, repeat the command and continue the stimulation. Stop at the instant they run to you and reward them by praising or feeding them a treat. Repeat this 3 or 4 times.

2. Package Contents

The package includes the following items:

Overview of all components included in the dog training collar package, including remote, receiver, collar straps, charging cable, contact points, silicone caps, test lamp, and user manual.
Figure 1: Package List Overview

PD 529-1-TIO (For 1 dog)

  • 1 x Remote Transmitter
  • 1 x Receiver
  • 1 x Collar Strap
  • 2 x Long Contact Points
  • 1 x USB Charging Cable
  • 2 x Short Contact Points
  • 2 x Long Conductive Silicone Caps
  • 1 x Test Lamp
  • 2 x Short Conductive Silicone Caps
  • 1 x User Manual
  • 2 x Anti-Shock Pads
  • 1 x Lanyard

PD 529-2-TIO (For 2 dogs)

  • 1 x Remote Transmitter
  • 2 x Receivers
  • 2 x Collar Straps
  • 4 x Long Contact Points
  • 1 x USB Charging Cable
  • 4 x Short Contact Points
  • 4 x Long Conductive Silicone Caps
  • 1 x Test Lamp
  • 4 x Short Conductive Silicone Caps
  • 1 x User Manual
  • 4 x Anti-Shock Pads
  • 1 x Lanyard

PD 529-3-TIO (For 3 dogs)

  • 1 x Remote Transmitter
  • 3 x Receivers
  • 3 x Collar Straps
  • 6 x Long Contact Points
  • 1 x USB Charging Cable
  • 6 x Short Contact Points
  • 6 x Long Conductive Silicone Caps
  • 1 x Test Lamp
  • 6 x Short Conductive Silicone Caps
  • 1 x User Manual
  • 6 x Anti-Shock Pads
  • 1 x Lanyard

3. Components Overview

PaiPaitek remote dog training collar with two receiver collars.
Figure 2: Remote Transmitter and Receiver Collars

3.1. Remote Transmitter Buttons

  1. Signal Channel Button (CH): Press to choose channel 1, 2, or 3 for dog training.
  2. Power Button/Keylock: Press to turn the remote transmitter on and off.
  3. Static Shock Button: Press to emit a mild static shock.
  4. Vibration Button: Press to make the receiver vibrate.
  5. Tone Button: Press to make the receiver beep. The tone function is not adjustable.
  6. LED Light Button: Activates the LED light.
  7. LED Light: Provides illumination.
  8. The +/- button: Used to reduce and raise the vibration and static shock level.
  9. Charging Port: For charging the remote transmitter.

3.2. Receiver Collar Features

  1. Power Button: Turns the receiver on and off.
  2. Indicator Light: Shows device status.
  3. Contact Points: Choose a suitable length to fit different thicknesses of dog's hair.
  4. Sensor Hole: In automatic mode, this activates the device when the dog barks.

4. Setup

4.1. Charging

Charge the remote transmitter and receiver for at least 2 hours upon receiving them. The collar cannot receive signals while charging.

Diagram showing the remote and receiver being charged via USB from a wall adapter and a laptop.
Figure 3: Easy Charging by Your PC/Laptop/Phone Charger/Power Bank

4.1.1. How to choose the USB charger

Use a USB charger with the following parameters: Input: 100-240V~50-60Hz, Output: 5V 1000mA (or 300mA/500mA).

4.1.2. Charge the remote transmitter

  1. Connect the charger cable to the charging port.
  2. Plug the charger into a standard socket.
  3. The battery icon will flash during charging and be solid when charging is completed.

4.1.3. Charge the receiver

  1. Remove the rubber cover, connect the receiver to a charger into a standard socket.
  2. The red indicator light will flash slowly when the receiver is charging. After fully charged, the red indicator light stays on.

4.2. Turning On/Off and Power Check

4.2.1. Turn the receiver on and off

  1. Turn On: Press the power button once. The receiver will make a short "beep" sound, indicating it is turned on.
  2. Turn Off: Press the power button once. The receiver will make a long "beep" sound, and the indicator light will no longer flash.

4.2.2. Check the receiver power

When the receiver is turned on, press the power button twice quickly to check the power level:

  • 5 beeps: 100% (80-100%)
  • 4 beeps: 80% (60-80%)
  • 3 beeps: 60% (40-60%)
  • 2 beeps: 40% (20-40%)
  • 1 beep: 20% (1-20%)

4.3. Pairing and Testing

4.3.1. How to pair the remote transmitter and receiver

  1. Turn on the remote transmitter, press the CH button to choose a signal channel you want to use.
  2. Hold the power button on the receiver for 2 seconds. When the indicator light keeps flashing, press one of the function buttons (beep, vibration, or static shock) on the remote transmitter to pair.
  3. If you do not press the function button within 10 seconds, please pair them again.
  4. If you have multiple receivers, you can choose the same signal channel or choose another channel for pairing.

4.3.2. Test the dog training collar

After pairing, you can test the functions:

Video: Product demonstration including unboxing, function testing (sound, vibration, static shock, flashlight), waterproofing, and collar assembly.
  • Static Shock Function Test: Static shock is not visible. Use the provided test lamp. Place the test lamp over the contact points and press the static shock button on the remote. The test lamp should light up.
  • Vibration Function Test: Press the vibration button on the remote. The receiver will vibrate.
  • Beep Function Test: Press the beep button on the remote. The receiver will emit a beep sound.

4.4. How to Wear the Receiver Collar Correctly

Wearing the collar correctly is crucial for healthy and effective dog training.

  1. The receiver should be placed at the side of the dog's neck, with the screw caps directly contacting the dog's skin.
  2. If your dog has thick hair on the neck, use longer screw caps to ensure proper contact.
  3. Maintain a finger's distance between the receiver collar and the dog's neck. It should not be too loose, as this can negatively affect the static shock effectiveness.
  4. The extra part of the strap can be trimmed or managed with other methods.
Diagram showing various dog sizes and how the adjustable collar fits, highlighting strong joints and TPU wearproof material.
Figure 4: Adjustable Dog Collar for various sizes (4-120lbs)

5. Operating Modes

The training collar offers three humane modes: Beep, Vibration, and Static Shock, each with adjustable levels for vibration and shock.

A dog wearing a training collar, with illustrations of Beep, Vibration, and Shock buttons and their respective levels.
Figure 5: 3 Humane Modes - Beep (1 Level), Vibration (1-100 Levels), Shock (1-100 Levels)

5.1. Automatic Anti-Barking Function

The automatic anti-barking function is disabled by default. Turn it on when needed.

5.1.1. Turn on/off automatic anti-barking function:

  • Turn On: Press the M button on the remote transmitter for 3 seconds. You will hear a 'beep' 1 time from the receiver, indicating the function is activated.
  • Turn Off: Press the M button on the remote transmitter for 3 seconds again. You will hear 'beep' 2 times from the receiver, indicating the function is deactivated.

5.1.2. How the automatic anti-barking collar works:

  1. 1st Work: Sound
  2. 2nd Work: Sound + Vibration (weak)
  3. 3rd Work: Sound + Vibration (medium)
  4. 4th Work: Sound + Vibration (strong)
  5. 5th Work: Sound + Vibration (strong) + Static (weak)
  6. 6th Work: Sound + Vibration (strong) + Static (medium)
  7. 7th Work: Sound + Vibration (strong) + Static (strong)

This progressive strengthening of stimulation is designed to be more humane and effective.

5.1.3. Automatic bark mode sensitivity level adjustment:

Ensure the receiver is powered on. Quickly press the receiver power button 3 times. The receiver will emit a beep, and the number of beeps indicates the sensitivity level:

  • Level 1: 1 beep
  • Level 2: 2 beeps
  • Level 3: 3 beeps
  • Level 4: 4 beeps
  • Level 5: 5 beeps

The higher the sensitivity, the more easily the receiver activates. It is recommended to start with Level 3 and adjust as needed.

5.1.4. Self-protection function of anti-barking collar:

  1. To protect the dog, if the device works 7 times continuously, the indicator light will flash rapidly and enter a self-protection mode for 60 seconds. After this period, the device returns to its initial state.
  2. Regardless of how many times the device works, if the dog stops barking for 30 seconds, the device will return to its initial state.

6. Maintenance

  1. Examine the receiver regularly to ensure tightness and eliminate external damages.
  2. Clean the screw caps with alcohol weekly.
  3. Examine your dog's neck and clean it weekly.
  4. The battery is rechargeable. To maintain battery life, charge it every 2 months if it is not often used.

7. Troubleshooting (FAQ)

Q: How old can my dog be to use a dog training collar?

A: Do not use on puppies younger than 6 months.

Q: Can I use a dog training collar with more than one dog?

A: Yes, you can simply add one or two receiver collars to the system to control two or three dogs, as three dog channels are available with one remote transmitter.

Q: What should I do if my dog's neck becomes red and irritated?

A: Discontinue use of the dog training collar for a few days. If the condition persists beyond 48 hours, please consult your veterinarian. Continue to monitor your dog's skin condition closely even if the skin becomes normal.

Q: Can I attach a leash to the receiver?

A: NO. This will result in pulling the screw caps (contact points) too tightly against your dog's neck. Use a separate collar placed above the receiver.

Q: How do I know when to charge the batteries of the dog training collar?

A: For Remote Transmitter: The battery level icon will be displayed on the bottom left of the LCD screen. For Receiver: Press the power button twice quickly to check the battery level. If only one beep is emitted, charge it in time.

Q: How long can I leave the receiver on my dog?

A: The receiver is not designed to be worn constantly. We recommend wearing the collar on your dog less than 18 hours per day.

Q: How long should I process my training session for my dog?

A: Training sessions should be kept positive and short, ideally about 10-15 minutes for each time.

Q: What are the proper levels of static shock for my dog?

A: Try to find the best suitable levels of static shock for your dog starting from the lowest level. Excessive levels of stimulation will cause a strong response from your dog.

Q: What is the effective distance of your dog training collar?

A: Without obstacles, the effective distance could be as far as 1000 meters between the remote transmitter and receiver collar. However, factors like telecom signal stations, magnetic fields, obstacles, battery volume, other wireless devices nearby, and terrain can influence the actual effective distance.

Q: Once my dog is trained and has obeyed my commands, is it still necessary for my dog to continue wearing the receiver?

A: Yes, you may need to reinforce your dog's memory with the receiver from time to time.

Q: I want to test the static shock function of the receiver collar myself, but it does not work. Is anything wrong?

A: If you test the receiver collar by your hand or leg, you must touch both contact points (2 screw caps) at the same time. Touching only one contact point will not work.

Q: The dog training collar does not work, or my dog does not respond after correct installation. How should I solve this problem?

  1. Make sure the batteries of the remote transmitter and receiver collar have enough power.
  2. Check to see if the receiver collar is turned on.
  3. Check the signal channel button on the remote transmitter to ensure signal channels are correctly configured.
  4. Try to pair the remote transmitter and receiver again.
  5. Take off the receiver collar and test all three functions to ensure they work properly.
  6. Make sure the receiver collar is properly worn and not loose.
  7. Trim your dog's hair where the screw caps (contact points) can touch the neck.

8. User Tips

  • Charging Cable Compatibility: The receiver collar uses a micro USB connector for charging. Ensure you use the correct cable type for the receiver, even if other USB-C cables are provided for different components.
  • Training Consistency: If your dog doesn't respond to training in the first few times, don't give up or increase the stimulation immediately. Instead, try working on the training for a few more times.
  • Positive Reinforcement: Always reward your dog with praise or treats when they respond correctly to commands during training.
  • Avoid Over-Stimulation: Never give a command if you are not able to enforce it. Your dog needs to make a mental connection between the stimulation and their behavior.
  • Waterproof Level: The receiver collar is waterproof up to IPX7, meaning it can be submerged in water. The remote transmitter is IPX3, which means it is splash-proof but not submersible.

9. Specifications

FeatureSpecification
ModelPD 529-TIO
FunctionTraining Dogs
Working ModesBeep, Vibration, Static Shock
Vibration and Static Shock Levels1-100 Levels
Net WeightRemote Transmitter: 50g, Receiver: 45g
Channels3 Channels
Remote Range1000m/1100yds/3300ft
Battery CapacityRemote Transmitter: 300mAh, Receiver: 650mAh
Working TimeRemote Transmitter: 180 days, Receiver: 25-40 days
Waterproof LevelRemote Transmitter: IPX3, Receiver: IPX7

9.1. Reference Size for Different Dogs

Size (Dog)Neck (In)Chest Measurement (In)Back Length (In)Type
Mini7.8-8.69.8-11.817.5Chihuahua, Yorkshire Terrier
Small7.8-9.511.4-14.29Chihuahua, Yorkshire Terrier, Poodle, Pomeranian
Medium9.0-11.013.7-16.511Maltese Dog, Shih Tzu
Large9.6-12.216.2-18.512.2Miniature Schnauzer, Pekingese
Large11.8-13.418.1-20.813.8Schnauzer, English Cocker Spaniel
Large13.0-14.520.5-23.215.7Beagle
Huge17.0-18.930.0-33.023.6Husky

10. Warranty and Support

10.1. Warranty

This product is covered with a warranty for 12 months from the date of its original purchase. Any defective part will be repaired or replaced at no charge if the appliance has not been tampered with and has been used according to these printed directions.

This warranty is void if the defect is caused by accidental damage, misuse, abuse, neglect, improper repair or alteration by unauthorized persons, or a failure to follow operating instructions provided with the product, including adding essential oils directly into the tank and base. This warranty does not apply to normal wear and tear or commercial use. In no event shall liability exceed the purchase price paid by the purchaser of the product. Under no circumstances shall there be liability for any loss, direct, indirect or incidental, or consequential damage arising out of, or in connection with the use of the product.

10.2. Support

If any problems occur, please contact the local dealer immediately to launch a warranty claim. Our consumer service representative will respond within 1 business day, advise you how to correct the problem yourself, or instruct you on how to return the defective unit back to us for repair or replacement.

For additional guides and documents, you may refer to the official user manual PDF available at: User manual (PDF)

© 2023 PaiPaitek. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.