ROANJUNYH Surface Mounted LED Downlight COB Spotlight

Contents

Surface Mounted LED Downlight COB Spotlight Instruction Manual

Model: Surface Mounted LED Downlight COB Spotlight

Brand: ROANJUNYH

1. Product Overview

This manual provides detailed instructions for the installation, operation, and maintenance of your new ROANJUNYH Surface Mounted LED Downlight COB Spotlight. This versatile lighting fixture features a foldable and rotating design, offering adjustable illumination for various indoor settings. Available in multiple wattages and color temperatures, it is designed for efficiency and durability.

Black and white surface mounted LED downlights, one tilted, showcasing the product design.
Figure 1: Surface Mounted LED Downlight COB Spotlight (Black and White models)

2. Safety Warnings

  • Before installation, always turn off the power switch or unplug the plug.
  • If replacing an old lamp, allow it to cool down completely before removal.
  • The lamp generates heat during use; do not touch it to avoid scalding. Wait for the lamp to cool down before disassembly.
  • Keep the lamp out of reach of children.
  • Do not use the lamp in high-temperature, humid, or flammable environments.
  • Keep the lamp away from acids, alkalis, or harmful gases.
  • This lamp is suitable for indoor use only. Do not install it outdoors or in a humid environment.

3. Specifications

FeatureSpecification
Product NameSurface Mounted LED Downlight / Ceiling Light / Spotlight
Body Color OptionsWhite, Black
Main MaterialAluminum + PC Lampshade
Light SourceCOB LED chip
Input VoltageAC 90-260V (220V-240V, 100V-120V compatible)
Power Options5W, 7W, 9W, 12W, 15W, 20W, 25W
Color TemperatureWarm White (2800K-3200K), Natural White (4000K-4500K), Cold White (6000K-6500K)
Dimensions (Diameter x Height)5W/7W/9W: 70mm x 100mm
12W/15W/20W: 90mm x 110mm
25W/30W: 110mm x 115mm
Color Rendering Index (CRI)>Ra85
LED Chip TypeCOB
Lifespan50,000 - 80,000 hours
CertificationCE, RoHS, FCC, 3C
Warranty3 years
Power Tolerance2%
Application AreaInterior decoration, living room, bedroom, restaurant, hotel, office, store, supermarket, exhibition hall, foyer.
OriginMainland China
Diagram showing the dimensions (diameter and height) for 5W-9W, 12W-20W, and 25W-30W models, along with color temperature ranges for Warm, Natural, and Cold White.
Figure 2: Product Dimensions and Color Temperature Guide
Black surface mounted LED downlight illustrating 360-degree free rotation and 90-degree up and down adjustment.
Figure 3: Adjustable Lighting Features (360° Rotation, 90° Tilt)

4. Installation Instructions

Please read all instructions carefully before beginning installation. Ensure the power is off before proceeding.

  1. Unscrew the inner hexagon screws and remove the circular base plate from the LED light body.
  2. Fix the base plate securely onto the ceiling using appropriate screws.
  3. Connect the electrical wires. Ensure the voltage marked on the lamp matches your actual usage voltage (AC 90-260V). If you have a low-voltage lamp (DC 12V-48V), do NOT connect it directly to 220V or 110V AC power, as this will burn out the lamp. Wrap connections with insulating tape.
  4. Align the lamp body with the fixed base ring and rotate it clockwise to install.
  5. Tighten the inner hexagon screws to secure the lamp body.
  6. After installation, turn on the light to check if it works normally.
Four-step diagram illustrating the installation process: 1. Unscrew base, 2. Connect wires, 3. Align and attach light body, 4. Finished.
Figure 4: Installation Steps Diagram

5. Operating Instructions

Once installed, turn on the power switch to operate the light. If you have purchased a dimmable lamp, use a compatible wall dimmer to adjust the brightness to your desired level.

6. Maintenance

  • Before cleaning, always turn off the power.
  • Do not wash the lamp with water.
  • Wipe the lamp with a clean, soft cloth to remove dust or dirt.

7. Troubleshooting

The light is not on:

  1. Check if the power switch is supplying power.
  2. If wires are loose, reconnect and fix them securely.
  3. Confirm that the correct voltage is connected to the lamp.
  4. Check if the LED module or driver is damaged and replace if necessary.

Flashing lights or dim lighting:

  1. Check and secure the power cord connections.
  2. Check if the LED module or driver is damaged and replace if necessary.
  3. For dimmable lights, ensure the dimmer is compatible and correctly matched to the light.

8. User Tips

  • Check Actual Wattage: Some users have noted that the actual power consumption might be lower than the stated wattage (e.g., 7.5W measured for a 25W model). If light output seems insufficient, verify the actual power draw with a device.
  • Inspect Upon Arrival: Carefully check for any physical defects like scratches, dents, or loose metal shavings inside the fixture upon receipt.
  • Dimmer Compatibility: If using a dimmable version, ensure your dimmer switch is fully compatible with LED fixtures to avoid flickering or poor dimming performance.

9. Warranty and Support

This product comes with a 3-year warranty. For any issues or support, please refer to the official user manual PDF for detailed contact information or visit the seller's store page.

A comprehensive user manual is available in PDF format. You can view it here.

© 2023 ROANJUNYH. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.