Product Overview
The NOKLEAD Digital Home Indoor Temperature Humidity Meter provides accurate readings of indoor temperature and humidity levels. It features a clear LCD display, a comfort level indicator, and multiple mounting options for versatile placement in your home or office.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 5253 |
| Measure Type | CU50 |
| Display Type | DIGITAL |
| Display Size | 2.0 - 3.9 Inches (88.84mm large screen) |
| Max Measuring Temperature | 50°C - 69°C |
| Humidity Accuracy | ±5%RH |
| Power Type | Button Battery (CR2032) |
| Battery Included | Yes |
| Battery Life | 1-2 Months (approx.) |
| Dimensions (L x W x H) | 66mm x 71mm x 14mm (approx.) |
| Style | Standing and Wall Hanging |
| Water Resistance | No |
Setup
-
Battery Installation:
- Open the battery compartment cover on the back of the device.
- Remove the plastic insulation tab if present.
- Insert one CR2032 button battery, ensuring the correct polarity (+/-).
- Close the battery compartment cover.
- Initial Power On: The device will automatically power on and display current temperature, humidity, time, and date once the battery is correctly installed.
-
Mounting Options:
- Standing: Use the built-in durable stand on the back to place the device on a flat surface.
- Magnetic Attachment: The device has a magnetic back, allowing it to be attached directly to metallic surfaces like refrigerators.
- Wall Stick: For non-metallic surfaces, use the adhesive pad provided. Stick the adhesive pad to the desired surface, then attach the device to the iron side of the adhesive pad.
The device offers versatile mounting options including a stand, magnetic back, and adhesive wall mount.
Operating Instructions
-
Time and Date Setting:
- In normal display mode, press and hold the "SET" button for a few seconds to enter time setting mode. The hour digit will start to flash.
- Press the adjustment button (usually the same "SET" button or a dedicated adjustment button) repeatedly to change the flashing digit.
- Press "SET" again to move to the next setting (minutes, then day, then month).
- Once all settings are adjusted, press "SET" to confirm and exit. The device will automatically exit setting mode after 15 seconds of inactivity.
-
12/24 Hour Format Switch:
- In normal display mode, press the "SET" button once to toggle between 12-hour and 24-hour time formats.
-
Temperature Unit (°C/°F) Switch:
- Press the "°C/°F" button (located on the back or side) to switch the temperature display between Celsius and Fahrenheit.
-
Comfort Level Indicator: The display includes a visual comfort level indicator (DRY, COMFORT, WET) based on humidity levels.
- DRY: Humidity < 30%
- COMFORT: 30% ≤ Humidity ≤ 69%
- WET: Humidity ≥ 70%
Understanding the comfort level indicator based on humidity ranges. - Refresh Rate: The device updates temperature and humidity readings approximately every 10 seconds.
Maintenance
- Battery Replacement: When the screen becomes blank or the display fades, it's time to replace the CR2032 button battery. Ensure to use only CR2032 batteries and do not mix different battery types. If the device will not be used for an extended period, remove the battery to prevent leakage.
- Cleaning: Clean the surface of the product with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water as it is not waterproof.
Troubleshooting
- Display is blank or faded: This usually indicates a low battery. Replace the CR2032 button battery with a new one.
- Inaccurate readings: If you suspect the readings are inaccurate, the device supports calibration. To enter calibration mode, press and hold two specific buttons (refer to the physical device for exact button combination, often 'SET' and another button simultaneously). Once in calibration mode, use the adjustment button to fine-tune temperature and humidity. Press 'SET' to save your calibration. Note that calibration settings may be lost if the battery runs out completely.
- Date format is incorrect (e.g., Day/Month instead of Month/Day): While the product description photos may show a specific date format, the actual display format might vary. There is no explicit setting to change the order of day/month display on the device itself.
User Tips
- The built-in magnet is very strong and convenient for attaching the device to metal surfaces like refrigerators or magnetic boards.
- The device uses a CR2032 coin cell battery. Ensure you have spares on hand for replacement.
- Despite its compact size, the display features large, easy-to-read fonts for quick glances.
- If you need to adjust the accuracy, utilize the calibration feature. Remember to save your settings after calibration.
Warranty and Support
This product comes with an 18-month warranty for quality-related issues. If you encounter any problems with your device, please contact customer service.
Customer Service Email: support@noklead.com
A 60-day refund policy is also available for any reason, provided the product and packaging are undamaged.