1. Introduction
Thank you for choosing the feyree Type 2 Portable EV Charger. This manual provides essential information for the safe and efficient operation of your charger. Please read these instructions thoroughly before use and retain them for future reference.
Figure 1: Charger display in 1-Phase (1P) and 3-Phase (3P) modes.
This charger is designed for electric vehicle charging and features Wi-Fi and Bluetooth connectivity for smart control via a mobile application. It supports 11KW power output at 16A across 3 phases.
2. Safety Warnings
2.1. General Warnings
- Avoid immersing the AC charging connection device in water.
- Do not step on, pull, bend, or knot the charging cable.
- Do not insert foreign objects into any part of the charging vehicle connector.
- Refrain from dropping the control box or placing heavy objects on its surface.
- Do not install or use the charger near flammable, explosive, harsh, or combustible materials, chemicals, or vapors.
- Ensure the operating ambient temperature remains within -30°C to +55°C.
- Do not use the charger when you, the vehicle, or the charger is exposed to severe rain.
- Do not use the charger if it is defective, appears cracked, frayed, broken, otherwise damaged, or fails to operate.
- Do not use this product if the enclosure or the EV connector is broken, cracked, open, or shows any other indication of damage.
- Do not attempt to open, disassemble, repair, tamper with, or modify the charger.
- This product is exclusively designed for electric vehicle charging purposes.
- Avoid using external wires or adapters.
- This product must be well-grounded when used.
- Never insert your fingers into the charging plug.
- The EV charger is not user serviceable. Contact feyree support for repairs.
- If the device fails to charge normally, contact the seller or consider a replacement.
- Never allow children to play with the charger cable.
- To avoid the risk of fire or electric shock, do not use this device with an extension cord.
- Using a worn or damaged AC outlet may cause burns or start a fire.
- Risk of explosion: This equipment has arc or sparking parts that should not be exposed to flammable vapors.
- Risk of electric shock: Do not remove the cover or attempt to open the enclosure of the charger unit. No user-serviceable parts inside. Refer servicing to qualified service personnel.
2.2. Precautions Before Charging
- It is recommended that electrical outlets for your charger be installed by a licensed and qualified electrician, complying with local codes.
- This product must be grounded. Grounding provides a path of least resistance for electric current to help reduce the risk of electric shock.
- Ensure the power plug and socket are compatible before initiating the charging process.
- Do not charge if the socket is damaged, rusty, cracked, or has a loose connection.
- If the socket is dirty or wet, disconnect the power supply first. Wipe the charging plug with a dry and clean cloth to ensure it is dry and free from debris.
- Verify that the charging connector, cable, control box, and plug surface are in good condition without any scratches, rust, breaks, or damages.
3. Product Overview and Features
The feyree portable EV charger offers smart charging capabilities with a robust design. Key features include:
- Wi-Fi Smart APP control for remote management.
- Schedule and appoint charging times to optimize energy costs.
- Current adjustable (8A-10A-13A-16A) with memory charging function.
- TypeB AC30mA + DC6mA RCD for enhanced safety.
- 2.8-inch LCD screen for real-time charging status.
- 5-meter cable for convenient reach.
- Temperature control chip to prevent overheating during prolonged charging.
Figure 2: Key features of the feyree EV Charger.
Figure 3: Temperature Control Protection mechanism.
4. Specifications
4.1. General Specifications (Type 2)
| Parameter | Value (11KW Model) |
|---|---|
| Power Rating | 11KW |
| Leakage Protection | TypeB AC 30mA + DC 6mA |
| Power Supply System | Three Phase |
| Rated Voltage | 380V±20% |
| Rated Current | 8-10-13-16A (Adjustable) |
| Input Frequency | 50Hz/60Hz |
| Charger Plug IP Rating | IP66 |
| Charger Box IP Rating | IP66 |
| Operating Temperature | -30°C ~ +55°C |
| Storage Temperature | -40°C ~ +80°C |
| Standby Power | <3W |
| Working Humidity | 5% ~ 95% non-condensation |
| Cable Specification | 5G 2.5mm² + 1*0.5mm² |
| Cable Length | 5m |
| Material | Copper alloy, silver plating |
| Weight | 3KG |
4.2. Control Box Dimensions
Figure 4: Dimensions of the Charging Control Box.
5. Setup
5.1. Physical Setup
- Ensure the power outlet is correctly installed and grounded by a qualified electrician.
- Uncoil the charging cable completely to prevent overheating.
- Inspect the charger, cable, and connectors for any visible damage before each use.
5.2. App Setup (Wi-Fi & Bluetooth)
The charger can be controlled via the