Introduction
This manual provides detailed instructions for the safe and efficient operation of your feyree Portable EV Charger Type2 32A 7KW EVSE. Please read this manual thoroughly before using the product and keep it for future reference. This charger is designed for electric vehicle charging purposes, offering Wi-Fi APP control, adjustable current, and smart timing features for home and outdoor use.
Safety Information
WARNING!
- Avoid immersing the AC charging connection device in water.
- Do not step on, pull, bend, or knot the charging cable.
- Do not insert foreign objects into any part of the charging vehicle connector.
- Refrain from dropping the control box or placing heavy objects on its surface.
- Do not install or use the charger near flammable, explosive, harsh, or combustible materials, chemicals, or vapors.
- Ensure the operating ambient temperature of the equipment remains within the range of -30°C to +55°C.
- Do not use the charger when you, the vehicle, or the charger is exposed to severe rain.
- Do not use the charger if it is defective, appears cracked, frayed, broken, otherwise damaged, or fails to operate.
- Do not use this product if the enclosure or the EV connector is broken, cracked, open, or shows any other indication of damage.
- Do not attempt to open, disassemble, repair, tamper with, or modify the charger.
- This product is exclusively designed for electric vehicle charging purposes.
- Avoid using external wires or adapters.
- This product must be well-grounded when used.
- Never insert your fingers into the charging plug.
- The EV charger is not user serviceable. Contact tina@feyree.com for any repairs.
- If the device fails to charge normally as per the operation manual, please contact the seller or consider a replacement.
- Never allow children to play with the charger cable.
- To avoid the risk of fire or electric shock, do not use this device with an extension cord.
- Using a worn or damaged AC outlet may cause burns or start a fire.
- Risk of explosion. This equipment has arc or sparking parts that should not be exposed to flammable vapors.
- Risk of electric shock. Do not remove the cover or attempt to open the enclosure of the charger unit. No user-serviceable parts inside. Refer servicing to qualified service personnel.
CAUTION! Please Note Before Start Charging
Precautions 1:
- It is recommended that electrical outlets for your charger should be installed by a licensed and qualified electrician. To avoid serious injury or death; installation must comply with local codes.
- This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to help reduce the risk of electric shock.
Precautions 2:
- Ensure the power plug and socket are compatible before initiating the charging process.
- Do not charge if the socket is damaged, rusty, cracked, or has a loose connection. In case the socket is dirty or wet, please disconnect the power supply first. Wipe the charging plug with a dry and clean cloth to ensure it is dry and free from any debris.
- Verify that the charging connector, cable, control box, and plug surface are in good condition without any scratches, rust, breaks, or damages.
Specifications
The feyree Portable EV Charger is available in various configurations. Below are the specifications for the Type 2 (7KW) model, along with other available options for reference.
General Specifications (Type 2, 7KW Model)
| Attribute | Value |
|---|---|
| Brand Name | feyree |
| Charger Type | Portable Charger |
| Power | 7KW |
| Numbers of phase | single phase |
| Type | Type2 |
| Version | Smart APP Version |
| Current | 8A-10A-13A-16A-20A-25A-32A Adjustable |
| RCD | TypeB AC30mA + DC6mA |
| Cable Length | 5m |
| Operating Temperature | -30 ~ +55°C |
| IP Rating | IP66 |
| Voltage | 85V-264V |
| Material | copper alloy, silver plating |
| Weight | 3KG |
| Height | 8cm |
| Width | 38cm |
| Length | 38cm |
Control Box Dimensions
Detailed Charging Box Specifications (TYPE2)
| Attribute | 7kW (Single Phase) | 11kW (Three Phase) | 22kW (Three Phase) |
|---|---|---|---|
| APP | Yes | Yes | Yes |
| Leakage protection | TypeB AC 30mA+DC 6mA | ||
| Power supply system | Single Phase | Three Phase | Three Phase |
| Rated voltage | 85V-264V | 380V±20% | 380V±20% |
| Rated current | 8-10-13-16-20-25-32A | 8-10-13-16A | 8-10-13-16-20-25-32A |
| Input Frequency | 50Hz/60Hz | ||
| Charger Plug | IP66 | ||
| Charger Box | IP66 | ||
| Working temperature | -30°C ~ +55°C | ||
| Storage temperature | -40°C ~ +80°C | ||
| Standby power | <3W | ||
| Working humidity | 5%~95% non-condensation | ||
| Cable Specification (7KW) | 3G 6mm²+1*0.5mm² | 5G 2.5mm²+1*0.5mm² | 5G 6mm²+1*0.5mm² |
For other types like GBT, TYPE1, and TS-NACS, please refer to the full PDF user manual available at feyree User Manual (PDF).
Setup Instructions
1. Initial Inspection
- Before first use, carefully inspect the charger, cable, and connectors for any signs of damage, cracks, or wear. Do not use if any damage is found.
- Ensure the electrical outlet you plan to use is properly installed and grounded by a qualified electrician, complying with local codes.
2. App Download and Setup
The feyree EV charger features Wi-Fi and Bluetooth connectivity for smart control via a mobile application.
- Download the "Tuya Smart" or "Smart Life" app on your smartphone. The app icons are typically a 't' in a red square or a house icon.
- After downloading, open the app, ensure your phone's Wi-Fi and Bluetooth are enabled.
- Select "Add Device" within the app.
- Follow the on-screen instructions to complete the device pairing process. This usually involves the app discovering the charger and guiding you through Wi-Fi network selection and password entry.
3. Connecting the Charger to Your EV
- Ensure the charger is connected to a suitable power outlet.
- Open the charging port on your electric vehicle.
- Carefully insert the Type 2 charging connector into your EV's charging port until it clicks securely into place.
Operating Instructions
Control Box LCD Display Overview
The control box features an LCD display that provides real-time information about the charging process and allows for manual adjustments. The display can show information for both 1-phase and 3-phase charging.
Adjusting Current, Delay, and Charging Time
You can adjust settings directly from the control box or via the mobile app.
- Adjust Current (Button A): Tap button "A" to cycle through available current settings (e.g., 8A, 10A, 13A, 16A, 20A, 25A, 32A). WARNING: The charging current set should not be higher than the supply current, otherwise there may be a safety hazard. The device cannot adjust the current during charging.
- Set Delay Time (Button D): Click button "D" to enter the delay time setting.
- Set Charging Time (Button T): Long press button "T" for 10 seconds to enter the settings page for charging time.
Using the Mobile App for Control
Once connected, the app allows for remote control and monitoring:
- Set Current: Adjust the charging current.
- Set Delay Time: Schedule a delay before charging begins.
- Set Charge Time: Define the duration of the charging session.
- Start/Stop Charging: Initiate or terminate charging remotely.
- Monitor Status: View real-time device status, temperature, voltage, current, power, and energy consumption.
Ending a Charging Session
There are several ways to end a charging session:
- Plan A (Automatic Stop): The charger will automatically stop charging when the car is fully charged. You can then directly unplug the connector.
- Plan B (Power Switch): Turn off the main power switch to end charging, then unplug the charger.
- Plan C (EV Control): Stop charging from the electric vehicle itself. Most EVs have a stop charging button or switch. After stopping, unplug the charger plug.
- Plan D (App Control): Click "Stop charging" on the mobile app, then pull out the charger plug.
WARNING: Do not unplug the charger during an active charging session without first stopping the charge via one of the methods above.
Maintenance
- Regular Inspection: Periodically inspect the charging cable, connectors, and control box for any signs of wear, damage, or corrosion.
- Cleaning: Keep the charger and its components clean and free from dust and debris. Use a dry, clean cloth for wiping. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the charger in a dry, cool place, away from direct sunlight and extreme temperatures. Ensure the cable is neatly coiled and not kinked.
- Temperature Control: The charger has a temperature control chip to prevent overheating. If the temperature exceeds 85°C, it will cut off within 0.2s. If it exceeds 70°C, it will automatically reduce current. Charging will automatically restart when the temperature drops below 65°C.
Troubleshooting
This section provides solutions to common issues you might encounter with your feyree EV charger. For more complex problems, please contact customer support.
Control Box LCD Display Error Messages (Single-phase)
Control Box LCD Display Error Messages (Three-phase)
Common Troubleshooting Table
| Fault Name | Reason for Failure | Recommendations |
|---|---|---|
| Over Voltage | AC input voltage is too high | 1. Ask an electrician to measure the input voltage. 2. If voltage is over 264V for a short time, wait for power system to restore. 3. If over 264V for a long time, contact local power supply. 4. If home electrical system is less than 264V, contact us. |
| Under Voltage | AC input voltage is too low | 1. Ask an electrician to measure the input voltage. 2. If voltage is less than 85V for a short time, wait for power system to restore. 3. If less than 85V for a long time, contact local power supply. 4. If home electrical system is over 85V, contact us. |
| Over Current | AC input current is too high | 1. Cut off power immediately. 2. Check charging plug for foreign objects and car's on-board charger for abnormalities. 3. If problem persists after troubleshooting, reconnect power supply; contact us if fault remains. |
| Over TEMP | Charger internal temperature greater than 85°C | 1. Check for other heat-generating equipment nearby and ensure ambient temperature is below 50°C. 2. If problem cannot be solved, contact us. |
| Elec leakage | Leakage greater than TypeA:(60Hz)AC20mA/(50Hz)AC30mA or TypeB: AC 30mA+DC 6mA | 1. Cut off power immediately. 2. Check charging plug for foreign objects and car for electrical leakage. 3. After troubleshooting, reset leakage protector, reconnect power supply; contact us if fault remains. |
| Leakage self check | The sensor for detecting leakage is abnormal | 1. Cut off power immediately. 2. Check if output cable is broken or connected to ground. 3. After troubleshooting, reconnect power supply; contact us if fault remains. |
| PE Fault | Poor grounding or incorrect wiring | 1. Cut off power immediately. 2. Check if charging station is grounded properly. 3. After troubleshooting, reconnect power supply; contact us if fault remains. |
| Err:cp | Charging plug CC/CP connection abnormality | 1. Check if the wiring of the charging plug is correct. 2. After troubleshooting, contact us if fault remains. |
User Tips
- App Integration: The charger is compatible with SmartLife/Tuya App, and can be integrated into Home Assistant using "Tuya Local" for retrieving sensor data.
- Scheduled Charging: Utilize the app's scheduling features to charge during off-peak electricity hours to save money. While the app allows setting a delay and charge duration, some users note that a more advanced scheduling feature (e.g., specific start/stop times) would be beneficial for optimizing charging with variable electricity rates.
- Cable Length: The 5m cable length offers good flexibility for placement.
- Build Quality: Users report solid build quality, suitable for outdoor use and various weather conditions.
- Customer Support: If you encounter issues, especially with app functionality or specific adapters, reach out to the seller for assistance.
Warranty & Support
Two-Year Warranty
feyree offers a two-year warranty to customers who have purchased an original feyree product.
Lifetime Technical Support
In case of any product-related issues, you are encouraged to reach out to the customer service team, providing pictures and videos for further assistance.
Customer Service E-mail: tina@feyree.com
Exclusions
The warranty does not cover:
- Any product damage resulting from failure to follow the recommended guidelines in this manual.
- Damage caused by unauthorized disassembly of the machine or seeking maintenance from a non-designated service center.
- Products not originally purchased from feyree.
- Any modifications or do-it-yourself alterations carried out without guidance from a licensed electrician.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antennas.
APP Download QR Code
