XZT Motorcycle Taillight

Contents

Motorcycle LED Rear Brake Tail Light Stop License Plate Lights User Manual

Model: Motorcycle Taillight

1. Introduction

This manual provides essential instructions for the safe installation, operation, and maintenance of your XZT Motorcycle LED Rear Brake Tail Light. Please read this manual thoroughly before installation and retain it for future reference.

2. Safety Information

WARNING:

  • Keep the device and accessories out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • To avoid the danger of suffocation, keep any plastic packaging away from babies and children. Do not use this bag in cribs, beds, carriages, or playpens. This bag is not a toy.

Always ensure your vehicle's power is disconnected before performing any electrical work.

3. Product Overview

The XZT Motorcycle LED Rear Brake Tail Light is a multi-functional lighting unit designed for motorcycles, trucks, ATVs, trailers, and Cafe Racers. It integrates driving lights, brake lights, and license plate illumination into a single compact unit. The light is available with different lens colors (e.g., red, smoked, clear).

Three variants of the LED taillight with different lens colors: red, smoked, and clear.
Figure 1: Product variants showing red, smoked, and clear lens options.

4. Specifications

Feature Detail
Model Name Motorcycle Taillight
Material ABS material
Operating Voltage 12V (implied from images, e.g., "TIANLI 12V 1.5/0.5W" on smoked lens variant)
Power Consumption Driving Light: 1.5W, Brake Light: 0.5W (implied from images)
Battery Included No
Origin Mainland China
Dimensions Refer to product listing for exact measurements.
Compliance CE, UKCA, FC, RoHS

5. Installation

Before installation, ensure the vehicle's power is off to prevent electrical shock or damage. If the product comes with a protective film, remove it before use.

5.1 Mounting

  1. Identify a suitable mounting location on your motorcycle, truck, ATV, or trailer, typically below the rear fender.
  2. Align the mounting bracket with the desired position and mark the drilling points if necessary.
  3. Secure the light unit to the mounting bracket using the provided hardware (bolts, nuts, washers).
  4. Attach the entire assembly to your vehicle, ensuring it is firmly secured and does not obstruct any moving parts or other lights.
Side view of the LED taillight assembly, showing the mounting bolts and wiring harness.
Figure 2: Side view of the light, illustrating mounting points and wiring.

5.2 Wiring Diagram

The light unit typically comes with three wires for connection:

  • Black Wire: Ground (-)
  • Red Wire: Brake Light (+)
  • Blue Wire: Driving Light / Running Light (+)

Connect these wires to the corresponding circuits on your vehicle. Ensure all connections are secure and properly insulated to prevent short circuits.

Close-up of the LED taillight showing the red, blue, and black wires for electrical connection.
Figure 3: Wiring connections (Red, Blue, Black).

6. Operation

Once properly installed and wired, the light will function as follows:

  • Driving Lights: When your vehicle's ignition is on and headlights/running lights are activated, the blue wire connection will illuminate the LED array at a lower intensity, serving as a continuous running light.
  • Brake Lights: When the brake lever or pedal is engaged, the red wire connection will illuminate the LED array at a higher intensity, signaling braking.
  • License Plate Lights: The light unit also includes LEDs to illuminate your license plate, ensuring visibility as required by law.
Diagram showing the LED taillight in three states: off, driving lights on, and brake lights on, with license plate illumination.
Figure 4: Visual representation of driving lights, brake lights, and license plate illumination.
Comparison image showing the difference in brightness between driving lights (dimmer) and brake lights (brighter) on a motorcycle.
Figure 5: Driving Lights vs. Brake Lights intensity comparison.

7. Maintenance

  • Cleaning: Clean the lens regularly with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the plastic.
  • Inspection: Periodically check all wiring connections for corrosion or looseness. Ensure the mounting hardware remains tight.
  • Damage: If the light unit or wiring becomes damaged, replace it immediately to maintain safety and compliance.

8. Troubleshooting

  • Light Not Functioning:
    • Check all wiring connections for proper contact and insulation.
    • Verify the vehicle's fuse for the lighting circuit is intact.
    • Ensure the vehicle's battery has sufficient charge.
  • Brake Light Not Significantly Brighter Than Driving Light:
    • Confirm correct wiring: the red wire should be connected to the brake light circuit, and the blue wire to the running light circuit. Incorrect wiring can lead to improper brightness differentiation.
    • Some users have noted that the brightness difference can be subtle depending on the specific unit and ambient light conditions.
  • License Plate Light Appears Red (with smoked lens):
    • If you have a smoked lens variant, the light illuminating the license plate may appear tinted red due to the lens color. This is a characteristic of the smoked lens design.

9. User Tips

  • Pre-Installation Check: Before final installation, connect the light temporarily to your vehicle's 12V power source to test all functions (driving light, brake light, license plate light) and ensure proper operation.
  • Wiring Verification: Double-check your wiring connections, especially the red and blue wires, to ensure the brake light is noticeably brighter than the running light for optimal safety.
  • Lens Choice: Be aware that smoked lenses may affect the color of the license plate illumination. If a clear white license plate light is critical, consider a clear or red lens variant.

10. Compliance & Disposal

This product complies with CE, UKCA, FC, and RoHS standards, indicating conformity with health, safety, and environmental protection standards for products sold within the European Economic Area, UK, and other regions.

The crossed-out wheeled bin symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service, or the shop where you purchased the product.

For a detailed user manual in PDF format, please refer to the official product documentation available at this link.

11. Warranty and Support

For warranty information, technical support, or replacement parts, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.