1. Product Overview
The XINYI Sini Audio C50L/C100L is a stereo Bluetooth digital power amplifier board designed for high-fidelity audio performance. It features a rotary encoder for smooth, stepless tuning and one-button start/stop functionality. The board supports multiple audio input methods including Bluetooth, AUX, U disk, and USB sound card input, and can be controlled via a mobile APP (Sinilink) for Android and iOS systems.
Figure 1: XINYI Sini Audio C50L Bluetooth Amplifier Board with key features highlighted.
2. Safety Information
- Ensure the power supply voltage does not exceed 26V to prevent damage to the circuit board.
- Always connect speakers and power supply correctly according to the diagrams to avoid short circuits or malfunction.
- Keep the device away from water and moisture.
- Do not attempt to disassemble or modify the product beyond the assembly instructions.
3. Package Contents
Please check the package for the following items:
- XINYI Sini Audio Amplifier Board (XY-C50L or XY-C100L)
- Upper Cover
- Lower Cover
- Rotary Encoder Knob Cap
- Heat Sink
- M2 Screws
- M2x13 Copper Pillars
- DC Adapter (may be included, depending on variant)
- Small Screwdriver (may be included)
Figure 2: Example of included components for assembly.
4. Setup and Installation
4.1 Assembly
Follow these steps to assemble the amplifier board:
- Place the circuit board onto the lower cover.
- Attach the M2x13 copper pillars to the designated holes on the circuit board.
- Secure the heat sink onto the appropriate component on the circuit board.
- Place the upper cover onto the copper pillars.
- Secure the upper and lower covers using the M2 screws.
- Attach the knob cap to the rotary encoder shaft.
Figure 3: Installation diagram.
4.2 Power Connection
The amplifier board operates with a DC 8-26V power supply. It is compatible with standard 5.5-2.1/2.5mm power adapter plugs. A 12V/24V standard power adapter with a current output of more than 2A is recommended. The power supply size should match the power of the speakers used. For example, an 8 ohm 50W speaker with a 24V power supply requires at least 4A current.
Connect the DC power adapter to the DC 8-26V input port on the board.
4.3 Speaker Connection
The board supports 2.0 stereo output. Connect your passive speakers to the SPKL (Left Speaker) and SPKR (Right Speaker) terminals. Ensure correct polarity (+ to + and - to -).
For active speakers, connect them to the 3.5mm audio output jack.
4.4 Audio Input Connection
The amplifier supports multiple audio input sources:
- Bluetooth: For wireless audio streaming.
- AUX IN: Connect external audio devices using a 3.5mm audio cable.
- USB AUDIO: Insert a U disk (FAT32 format, max 32GB) for local playback or connect to a computer via USB for sound card functionality.
Figure 4: Amplifier board connections and controls.
Figure 5: Example of a complete setup with speakers and USB drive.
5. Operating Instructions
5.1 Power On/Off and Volume Control
The rotary encoder serves multiple functions:
- Short Press: Play/Pause audio playback.
- Long Press: Turn the amplifier on/off.
- Rotate: Adjust the volume (stepless tuning).
Video 1: Demonstration of sound quality and rotary encoder functions (volume, play/pause).
5.2 Bluetooth Connection
- When the board is powered on, the blue LED will flash quickly, indicating it's in Bluetooth connection mode.
- On your mobile phone or Bluetooth device, search for "Xinyi" in the Bluetooth settings.
- Click "Xinyi" to complete the connection. A sound will confirm the connection, and the blue LED will turn solid.
- When music is playing, the blue LED will flash slowly.
Mobile APP Control (Sinilink):
The amplifier supports control via the Sinilink mobile APP (Android and iOS). Ensure all APP permissions are granted in your phone settings for proper functionality.
- Open the Sinilink APP.
- Click the small yellow dot (usually indicating device search).
- Click to connect to the Bluetooth device.
- Search for the amplifier's Bluetooth name.
- Once connected, you can control volume, sound effects, track selection (up/down), play/pause, and play mode through the APP.
If you encounter issues, ensure your phone's location information is turned on when using the APP.
5.3 Audio Input Mode Switch
The amplifier prioritizes external audio devices. If no external device is connected, it defaults to Bluetooth mode. If an AUX cable or U disk is inserted, it will automatically switch to that input. For example, inserting an AUX cable during Bluetooth playback will immediately switch to AUX playback. Audio modes can also be switched via the Sinilink APP.
5.4 U Disk and USB Sound Card Input
- U Disk: Ensure your U disk is formatted to FAT32 and has a maximum capacity of 32GB. For WAV format, the sampling rate must be within 44100Hz; higher rates may cause playback failure.
- USB Sound Card: Connect the board to your computer using a USB data cable. Most computer systems will automatically switch to the USB sound card. If not, manually select it in your computer's sound settings.
6. Specifications
| Feature | XY-C50L (Flagship Version) | XY-C100L (Extreme Edition) |
|---|---|---|
| Brand Name | MAOZUA (XINYI Sini Audio) | |
| Model Number | XY-C50L | XY-C100L |
| Channels | 2 (2.0 Stereo) | |
| Maximum Power Per Channel | 50W | 50W (Note: Product title suggests 100W for C100L, but spec table lists 50W*2) |
| Certification | CE | |
| Sinilink APP Support | YES (Android & iOS) | |
| Supply Voltage | DC 8-26V / 3A (recommended) | |
| Audio Input | Bluetooth, AUX, U disk, USB sound card | |
| Volume Control | 360-degree rotary encoder | |
| Audio Output | Speaker (2 channels) + 3.5mm Audio Jack | |
| Output Filter | NO filter | Professional audio LC filter |
| Protections | Overcurrent, short circuit, overtemperature, electrostatic | Overtemperature, overvoltage, undervoltage, DC-detect, short circuit, electrostatic |
| Thermal Solution | Heat sink and shell | |
| Recommended Speakers | 4-8Ω, 10-200W | |
| Size (with shell) | 56mm x 50mm x 18mm | 58mm x 52mm x 19mm |
| Weight (including packaging) | 61g | 87g |
Power Output vs. Voltage:
- 12V: 8Ω/15W+15W, 4Ω/20W+20W
- 15V: 8Ω/18W+18W, 4Ω/>30W+30W
- 19V: 8Ω/32W+32W, 4Ω/>45W+45W
- 24V: 8Ω/40W+40W, 4Ω/>50W+50W
7. Troubleshooting
- No Sound / Stuttering: If the speakers do not play or stutter, especially with a ticking sound, the power supply might be insufficient. Increase the current output of your power supply (e.g., use a 12V-800mA for 8W speakers, or 19V-3.16A for 150W speakers).
- Bluetooth Connection Issues:
- Ensure the amplifier is not placed on a metal table, as metal can shield the PCB antenna signal.
- Keep the amplifier away from routers or other strong signal interference sources.
- If using a metal enclosure, ensure the antenna is routed outside the enclosure.
- If the Sinilink APP fails to connect, check that all APP permissions (including location) are enabled in your phone settings.
- Noise (Bluetooth/Wired): If you experience white noise, especially with Bluetooth, ensure you are using a shielded AUX cable for wired connections. The XY-C100L model is noted for having no Bluetooth noise.
- U Disk Playback Failure: Verify the U disk is FAT32 formatted and does not exceed 32GB. For WAV files, ensure the sampling rate is within 44100Hz.
- Overheat Protection: If the amplifier stops playing due to overheating, strengthen heat dissipation (e.g., ensure the heat sink is properly installed and has airflow) or reduce the playback volume.
8. Maintenance
The amplifier board requires minimal maintenance. Keep it clean and free from dust. Ensure adequate ventilation to prevent overheating, especially during prolonged use at high volumes. Do not expose the device to extreme temperatures or humidity.
Figure 6: Amplifier board with heat sink.
9. User Tips
- Power Supply Matching: Always match your power supply to your speakers' requirements. Insufficient power can lead to sound issues.
- USB Playback Controls: When playing from a USB drive, a single press on the rotary encoder acts as "pause," two presses skip to the "next song," and three presses switch to "Bluetooth" mode.
- Bluetooth Quality: The XY-C100L model is particularly noted for its clear, noise-free Bluetooth connection.
- Volume Control: The stepless volume control is precise, but note that turning the volume down does not necessarily turn off the power.
- PDF Manual: A detailed user manual in PDF format is available for download. Please refer to the seller's product page or contact support for the link: User manual (PDF).
10. Warranty and Support
For warranty information and technical support, please refer to the seller's policies or contact the seller directly through the platform where the product was purchased. Keep your purchase receipt for any warranty claims.